The fact that current_time can "fail" makes its use a bit awkward.
All callers in the Kernel are trusted besides syscalls, so assert
that they never get there, and make sure all current callers perform
validation of the clock_id with TimeManagement::is_valid_clock_id().
I have fuzzed this change locally for a bit to make sure I didn't
miss any obvious regression.
The variety of checks for Processor::id() == 0 could use some assistance
in the readability department. This change adds a new function to
represent this check, and replaces the comparison everywhere it's used.
We had some inconsistencies before:
- Sometimes "The", sometimes "the"
- Sometimes trailing ".", sometimes no trailing "."
I picked the most common one (lowecase "the", trailing ".") and applied
it to all copyright headers.
By using the exact same string everywhere we can ensure nothing gets
missed during a global search (and replace), and that these
inconsistencies are not spread any further (as copyright headers are
commonly copied to new files).
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Alot of code is shared between i386/i686/x86 and x86_64
and a lot probably will be used for compatability modes.
So we start by moving the headers into one Directory.
We will probalby be able to move some cpp files aswell.
Instead of declaring a reserved area from byte 0x160 to 0x400, we
change the declaration of TimerStructure array to be 32 units.
Also, a static_assert was added, to ensure that the calculation is
right.
This reverts commit af22204488.
According to the HPET specification, each theoretical comparator takes
32 bytes in the MMIO space.
Although I hardly believe that any system will implement all 32
comparators, in practice if a machine happens to have more than 3
comparators, we need to address the comparators correctly if we want to
use them.
Previously all of the CommandLine parsing was spread out around the
Kernel. Instead move it all into the Kernel CommandLine class, and
expose a strongly typed API for querying the state of options.
I don't dare touch the multi-threading logic and locking mechanism, so it stays
timespec for now. However, this could and should be changed to AK::Time, and I
bet it will simplify the "increment_time_since_boot()" code.
We were calibrating it to 260 instead of 250 ticks per second (being
off by one for the 1/10th second calibration time), resulting in
ticks of only ~3.6 ms instead of ~4ms. This gets us closer to ~4ms,
but because the APIC isn't nearly as precise as e.g. HPET, it will
only be a best effort. Then, use the higher precision reference
timer to more accurately calculate how many ticks we actually get
each second.
Also the frequency calculation was off, causing a "Frequency too slow"
error with VMware.
Fixes some problems observed in #5539
This may seem like a no-op change, however it shrinks down the Kernel by a bit:
.text -432
.unmap_after_init -60
.data -480
.debug_info -673
.debug_aranges 8
.debug_ranges -232
.debug_line -558
.debug_str -308
.debug_frame -40
With '= default', the compiler can do more inlining, hence the savings.
I intentionally omitted some opportunities for '= default', because they
would increase the Kernel size.
Because registering and unregistering interrupt handlers triggers
calls to virtual functions, we can't do this in the constructor
and destructor.
Fixes#5539
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
There's no real system here, I just added it to various functions
that I don't believe we ever want to call after initialization
has finished.
With these changes, we're able to unmap 60 KiB of kernel text
after init. :^)
This eliminates the window between calling Processor::current and
the member function where a thread could be moved to another
processor. This is generally not as big of a concern as with
Processor::current_thread, but also slightly more light weight.
This was done with the help of several scripts, I dump them here to
easily find them later:
awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in
for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in)
do
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \;
done
# Remember to remove WRAPPER_GERNERATOR_DEBUG from the list.
awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.Everything:
The modifications in this commit were automatically made using the
following command:
find . -name '*.cpp' -exec sed -i -E 's/dbg\(\) << ("[^"{]*");/dbgln\(\1\);/' {} \;
Compared to version 10 this fixes a bunch of formatting issues, mostly
around structs/classes with attributes like [[gnu::packed]], and
incorrect insertion of spaces in parameter types ("T &"/"T &&").
I also removed a bunch of // clang-format off/on and FIXME comments that
are no longer relevant - on the other hand it tried to destroy a couple of
neatly formatted comments, so I had to add some as well.
The PIT is now also running at a rate of ~250 ticks/second, so rather
than assuming there are 1000 ticks/second we need to query the timer
being used for the actual frequency.
Fixes#4508
This implements a number of changes related to time:
* If a HPET is present, it is now used only as a system timer, unless
the Local APIC timer is used (in which case the HPET timer will not
trigger any interrupts at all).
* If a HPET is present, the current time can now be as accurate as the
chip can be, independently from the system timer. We now query the
HPET main counter for the current time in CPU #0's system timer
interrupt, and use that as a base line. If a high precision time is
queried, that base line is used in combination with quering the HPET
timer directly, which should give a much more accurate time stamp at
the expense of more overhead. For faster time stamps, the more coarse
value based on the last interrupt will be returned. This also means
that any missed interrupts should not cause the time to drift.
* The default system interrupt rate is reduced to about 250 per second.
* Fix calculation of Thread CPU usage by using the amount of ticks they
used rather than the number of times a context switch happened.
* Implement CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE and use it
for most cases where precise timestamps are not needed.
Problem:
- `(void)` simply casts the expression to void. This is understood to
indicate that it is ignored, but this is really a compiler trick to
get the compiler to not generate a warning.
Solution:
- Use the `[[maybe_unused]]` attribute to indicate the value is unused.
Note:
- Functions taking a `(void)` argument list have also been changed to
`()` because this is not needed and shows up in the same grep
command.
This allows us to use blocking timeouts with either monotonic or
real time for all blockers. Which means that clock_nanosleep()
now also supports CLOCK_REALTIME.
Also, switch alarm() to use CLOCK_REALTIME as per specification.
Use the TimerQueue to expire blocking operations, which is one less thing
the Scheduler needs to check on every iteration.
Also, add a BlockTimeout class that will automatically handle relative or
absolute timeouts as well as overriding timeouts (e.g. socket timeouts)
more consistently.
Also, rework the TimerQueue class to be able to fire events from
any processor, which requires Timer to be RefCounted. Also allow
creating id-less timers for use by blocking operations.
Most systems (Linux, OpenBSD) adjust 0.5 ms per second, or 0.5 us per
1 ms tick. That is, the clock is sped up or slowed down by at most
0.05%. This means adjusting the clock by 1 s takes 2000 s, and the
clock an be adjusted by at most 1.8 s per hour.
FreeBSD adjusts 5 ms per second if the remaining time adjustment is
>= 1 s (0.5%) , else it adjusts by 0.5 ms as well. This allows adjusting
by (almost) 18 s per hour.
Since Serenity OS can lose more than 22 s per hour (#3429), this
picks an adjustment rate up to 1% for now. This allows us to
adjust up to 36s per hour, which should be sufficient to adjust
the clock fast enough to keep up with how much time the clock
currently loses. Once we have a fancier NTP implementation that can
adjust tick rate in addition to offset, we can think about reducing
this.
adjtime is a bit old-school and most current POSIX-y OSs instead
implement adjtimex/ntp_adjtime, but a) we have to start somewhere
b) ntp_adjtime() is a fairly gnarly API. OpenBSD's adjfreq looks
like it might provide similar functionality with a nicer API. But
before worrying about all this, it's probably a good idea to get
to a place where the kernel APIs are (barely) good enough so that
we can write an ntp service, and once we have that we should write
a way to automatically evaluate how well it keeps the time adjusted,
and only then should we add improvements ot the adjustment mechanism.
* Change the register structures to use the volatile keyword explicitly
on the register values. This avoids accidentally omitting it as any
access will be guaranteed volatile.
* Don't assume we can read/write 64 bit value to the main counter and
the comparator. Not all HPET implementations may support this. So,
just use 32 bit words to access the registers. This ultimately works
around a bug in Bochs 2.6.11 that loses 32 bits of a 64 bit write to
a timer's comparator register (it internally writes one half and
clears the Tn_VAL_SET_CNF bit, and then because it's cleared it
fails to write the second half).
* Properly calculate the tick duration in calculate_ticks_in_nanoseconds
* As per specification, changing the frequency of one periodic timer
requires a restart of all periodic timers as it requires the main
counter to be reset.
This enables the APIC timer on all CPUs, which means Scheduler::timer_tick
is now called on all CPUs independently. We still don't do anything on
the APs as it instantly crashes due to a number of other problems.
