- Ambiguous `raw_value()` method is replaced with `line_number()` and
`span()`.
- `line_name()` that before returned either line name or area name is
replaced with `line_name()` and `area_name()`.
- `Position` type is replaced with `Line` and `Area` type so we don't
have to guess while doing layout.
Affected test expectations:
- `template-lines-and-areas` - improvement over what we had before.
- `named-tracks` - rebaseline a giant test. will have to split it into
smaller tests in the future.
The invariants for these property getters are supposed to be checked by
the has_entries_and_events_disabled AO, but we don't have all the
plumbing hooked up between Navigables and Navigation yet.
Add a test to make sure that these methods don't assert when calling
them on a fresh page.
The resolution is simply 1dppx * device pixel ratio.
This makes high resolution images show up on https://apple.com/
when running on a high-DPI display. :^)
Note that we don't load the local font as specified, but at least we no
longer reject such src properties in the CSS parser.
This makes the custom fonts used on http://apple.com/ actually load. :^)
We were previously setting the end position of attribute names in self-
closing HTML tags to the end of the attribute value. To illustrate the
previous behavior, consider this tag and its attribute's start and end
positions (shown inclusively below):
<meta charset="UTF-8" />
^ name start
^ value start
^ value end
^ name end
Rather than setting the end position of the attribute name when we parse
the closing slash, ensure the end position is already set while we are
in the AttributeName state. We now have:
<meta charset="UTF-8" />
^ name start
^ name end
^ value start
^ value end
The tokenizer unit test has been extended to test these positions.
To illustrate the previous behavior, consider these tags and their start
and end positions (shown inclusively below):
Start tag: End tag:
<span> </span>
^ start ^ start
^end ^end
The start position of a tag is the first ASCII-alpha code point after
the opening brace. The start position of a close tag is the slash just
before the first ASCII-alpha code point. And the end position of both
is the closing brace. So the opening brace is not included in the
emitted tag, but the closing brace is. And the end tag including the
slash is an oddity that had to be worked around in its only use case
(syntax highlighting).
We now consistently exclude the braces from the emitted tag, and also
exclude the slash from the end tag, so that it does not need to be
accounted for in syntax highlighting. That is, we now have:
Start tag: End tag:
<span> </span>
^ start ^ start
^end ^end
The tokenizer unit test has been extended to test these positions.
`DeprecatedString::to_int` calls `StringUtils::convert_to_int`
internally. However, the integer parsing is not done in an HTML
spec-compliant way. For example, `colspan="2;"` is valid according to
the spec. But, with the current implementation, we will fail to parse
"2;", and instead fall back to using 1 as the colspan value.
This patch changes the `HTMLTableCellElement::col_span` and
`HTMLTableCellElement::row_span` methods to use the
`Web::HTML::parse_non_negative_integer` function that will parse the
attribute value in an HTML spec-compliant way.
We have code inside LibWeb that uses the
`AK::StringUtils::convert_to_uint`and `AK::StringUtils::convert_to_int`
methods for parsing integers. This works well for the most part, but
according to the spec, trailing characters are allowed and should be
ignored, but this is not how the `StringUtil` methods are implemented.
This patch adds two new methods named `parse_integer` and
`parse_non_negative_integer` inside the `Web::HTML` namespace that uses
`StringUtils` under the hood but adds a bit more logic to make it spec
compliant.
This giant grid test has been a source of problems while iterating on
GFC for a long time. Let's split it into smaller tests to make it
easier to identify issues without needing further reductions on the
test.
These two ref-tests involve two boxes positioned in the same place, with
outlines. Outlines always have a border-radius, meaning that the corner
pixels are not 100% opaque. (It seems to be 254 instead of 255.) With
the test files painting two outlines, and the ref test only painting
one, slight changes in the background color of the page would make that
slight variation visible sometimes. So, let's avoid that inconsistency
by always painting one outline instead of two.
We were relying on the table fixup algorithm to insert the missing table
row, which fails to do so when we only have an image in the button.
While that might be a problem with the table fixup algorithm, we should
build a correct layout tree explicitly anyway.
Fixes crashes on GitHub.
Fixes bug when "clip" property does not affect abspos children.
This change makes "clip" property to be applied together with
"overflow: hidden" in `apply_clip_overflow_rect()` that already
handles abspos children correctly.
This matches if the element has a placeholder, and that placeholder is
currently visible. This applies to `<input>` and `<textarea>` elements,
but our `<textarea>` is very limited so does not support placeholders.
Grid specification https://www.w3.org/TR/css-grid-2/#z-order defines
special painting order for grid items which should be the same as for
defined for inline-blocks in CSS2.
Check the width of the next token after white space to decide line
breaks. The next width can also be the total width of multiple tokens.
This better follows the CSS Text specification and matches behavior of
other browsers.
Fixes#20388.
We still don't know how to resolve font-relative lengths in <img sizes>
since we don't always have font size information available at this stage
in the pipeline, but we can at least handle viewport-relative lengths.
This fixes an issue on many websites where low-resolution images were
loaded (appropriate for a small viewport) even when the viewport is big.
And treat them as "auto" for now, per CSS-SIZING-3, with a FIXME about
supporting more layout directions.
This fixes an issue on MDN where `height: max-content` was not
overriding height from non-CSS presentational hints.
CSS-ALIGN-3 tells us that `normal` behavior inside flex containers is
simply to behave as `stretch` so this patch makes them behave the same
inside FFC.
Furthermore, we change the `align-items` initial value to `normal`,
matching other engines.
I'm about to make StackingContext traverse the paintable tree instead of
actually traversing the layout tree, and it turns out we were not
creating paintables for these SVG elements.
Also switch them to Layout::Box instead of the default InlineNode to
make the trees look a bit less weird. Ultimately, we should do something
specialized for these subtrees, but for now this'll do.
This patch just adds the new root paintable and updates the tests
expectations. The next patch will move painting logic from the layout
viewport to the paint viewport.
Instead of assuming that the WebDriver binary is in PATH or the two
most common build directories for our scripts, add a command line
argument to the script to pass a WebDriver binary.
We should be documenting required pacakges elsewhere and installing them
in the setup step of CI.
This also fixes a problem where the run script would fail if you already
had a cloned wpt directory.
This has to cheat and use a screenshot but thanks to the "Take Full
Screenshot" feature of Ladybird, it is very easy to update this test.
The steps are documented in the test.
When a box is sized under max-content constraint, any percentage value
set for max-width should be considered as if it were infinite. In other
words, it should have no effect on restricting the box's width.
This doesn't seem to actually have fixed any bugs, as having
FillOpacity instead of StrokeOpacity in the call to parse_css_value
doesn't seem to have actually been causing bugs. But, I still think it's
worthwhile correcting.
The reason that it wasn't causing bugs is that having FillOpacity
instead of StrokeOpacity in the call to parse_css_value means that when
parsing the value is compared to the acceptable values for that property
(for example the value can only be a percentage, or a number, etc.). In
this case both FillOpacity and StrokeOpacity seem to accept the same
values.
The SVG G container should have the same size as its children. This
fixes a bug when there was an opacity value on the G element, as in
StackingContext it would try and get a bitmap of the element which would
be empty due to it having no size.
We now keep the color value as a StyleValue up until we go to paint the
gradient, which makes `currentColor` work, along with any other color
values that can't be immediately converted into a `Gfx::Color` while
parsing.
If we run an inline script from the HTML parser, it may append a text
node to the current insertion point.
If there was text content immediately following the script element,
we would previously overwrite the script-inserted text content, due to
an oversight in the way we select an appropriate insertion point
This patch fixes the issue by only inserting parser content into
existing text nodes if they are empty.
Instead of applying relative offsets (like position:relative insets)
during painting and hit testing, we now do a pass at the end of layout
and assign the final resolved offsets to paintables.
This makes painting and hit testing easier since they don't have to
think about relative offsets, and it also fixes a bug where offsets were
not applied to text fragments inside inline-flow elements that were
themselves position:relative.
The ref tests runner takes screenshots of both the input page and the
expected page, then compares them. Ref testing allows us to catch
painting bugs, which cannot be detected with the layout and text tests
we already have.
With ref tests, we'll likely want to reuse the same expectation page
for multiple inputs. Therefore, there's a `manifest.json` file that
describes the relationship between inputs and expected outputs.
Changing `calculate_min_content_heigh()` and
`calculate_min_content_heigh()` to accept width as `CSSPixels`, instead
of `AvailableSize` that might be indefinite, makes it more explicit
that width is supposed to be known by the time height is measured.
This change has a bit of collateral damage which is rows height
calculation regression in `table/inline-table-width` that worked before
by accident.
We now apply MathML's default user agent style sheet along with other
default styles. This sheet is not mixed in with the other styles in
CSS/Default.css because it is a namespaced stylesheet and so has to
be its own sheet.
Using avilable space directly while resolving table container width
allows to avoid assigning it to table wrapper box content width which
sometimes involves infinite (saturated) values.
Also this allows to get rid of set_max_content_width() which is a hack
that allows to bypass set_content_width() to assign infinite
(saturated) width to a box.
Closes https://github.com/SerenityOS/serenity/issues/19521
Replicate the more conservative way it's done for other nodes, for
which we verify whether they have a paintable before doing
painting-related operations with it.
Fixes crash on https://www.haiku-os.org/.
Returning greatest_child_width() from automatic_content_width() in BFC
if root box children are inline and there are min/max-width that caused
width to be changed after IFC layout while content_width should be
always set to correct value by layout_inline_children() regardless of
layout mode.
- Out-of-flow items should not affect grid layout
- "The static position of an absolutely-positioned child of a grid
container is determined as if it were the sole grid item in a grid
area whose edges coincide with the content edges of the grid
container."
This object is available as `window.internals` (or just `internals`) and
is only accessible while running in "test mode".
This first version only has one API: gc(), which triggers a garbage
collection immediately.
In the future, we can add more APIs here to help us test parts of the
engine that are hard or impossible to reach via public web APIs.
This could happen if a sequence of '0' parts was followed by a longer
sequence of '0' parts at the end of the host. The first sequence was
being used for the compress, and not the second.
For example, [1:1:0:0:1:0:0:0] was being serialized as: [1:1::1:0:0:0]
instead of [1:1:0:0:1::].
Fix this by checking at the end of the loop if we are in the middle of a
sequence of '0' parts that is longer than the current longest.
We were already parsing non-function-syntax :host, so let's also do
the :host(...) variant. Note that we don't have matching for these yet.
This fixes many issues on sites generated by Wix, as they often have
selector lists that include some :host() selector, and we'd reject the
entire rule after failing to parse it.
This stuff is pretty hairy since the specifications don't give any
guidance on which widths to use when calculating the intrinsic height of
flex items in a column layout.
However, our old behavior of "treat anything indefinite as fit-content"
was definitely not good enough, so this patch improves the situation by
considering values like `min-content`, `max-content` and `fit-content`
separately from `auto`, and making the whole flex layout pipeline aware
of them (in the cross axis context).
Use the max-width of percentage cells instead of min-width as the
reference to be used to compute the total table width. The specification
only suggests that the UA should try to satisfy percentage constraints
and this behavior is more consistent with other browsers.
Fixes infinite spinning in the cases when CSSPixels does not have
enough precision to represent increase per track which happens when
very small extra_space got divided by affected tracks number.
Change associativity in computing of replaced element size to improve
precision of division.
Fixes vertically squashed image from Mozilla splash page MDN example.
This patch implements "Overflow Viewport Propagation" from CSS-OVERFLOW.
It fixes an issue where many websites were not scrollable because they
had `overflow: scroll` on the body element and we didn't propagate it.
Pseudo-elements like ::before and ::after were discarded when their
content property was an empty string (ignoring whitespace), because they
are anonymous containers with no lines.
Our previous way around it was to add an empty line box (see b062a0fb7c)
however it didn't actually work for cases described in the previous
commit.
This makes avatars and cover arts square on last.fm and "fixes" the test
css-pseudo-element-should-not-be-affected-by-presentational-hints.html.
Unfortunately, this also regresses on block-and-inline/clearfix.html,
but that hopefully will be handled in subsequent commit.
Properties like min-width, max-width, etc, should be ignored while we're
trying to determine the intrinsic size of a flex container.
This fixes an infinite recursion when using an intrinsic size keyword as
the max-width of a flex column container.
Note that this behavior is marked as AD-HOC in code comments because
specs don't tell us how to achieve intrinsic sizing.
We can now load product pages on the Twinings site, such as
https://twinings.co.uk/products/earl-grey-100-tea-bags :^)
Fixes the issue that before "automatic minimum size" were used to size
flexible tracks even though specification says is should be "minimum
contribution"
When toggling `display: none` on an element, it can go from having a
layout subtree to not having one. In the `none` case, we were previously
leaving stale layout nodes hanging off DOM nodes in the subtree.
These layout nodes could be queried for outdated information and
probably other things that we shouldn't allow.
Fix this by having TreeBuilder prune any old layout nodes hanging off
nodes in a subtree after its subtree root doesn't produce a layout node.
This is defined in the spec, but was missing in our table. Fix this, and
add a spec comment for what is missing. Also begin a basic text based
test for URL, so we can get some coverage of LibWeb's usage of URL too.
Previously, we always rounded border-widths up when converting them to
device pixels. However, the spec asks us to follow a specific algorithm
to "snap" these values, so that the computed value is snapped.
The difference from before, is that widths of between 0 and 1 device
pixels are rounded up to 1, and and values larger than 1 are rounded
down.
If a math function resolves to `<length>` or `<percentage>`, then it
will by definition also resolve to `<length-percentage>`. (Same for any
other basic types.) Since we were checking `<length-percentage>` first
and then bailing if no given properties could accept that, math
functions would always fail to match a property that just accepts a non
`-percentage` type.
This is a universal value like `initial` and `inherit` and works by
reverting the current value to whatever we had at the start of the
current cascade origin.
The implementation is somewhat inefficient as we make a copy of all
current values at the start of each origin. I'm sure we can come up with
a way to make this faster eventually.
Allow the left margin of a box which creates a block formatting context
to overlap with left floating boxes which are siblings in the document
tree.
Fixes#20233 and the comment layout on https://lobste.rs.
This change makes tree builder omit elements with "display: contents"
from the layout tree during construction. Their child elements are
instead directly appended to the parent element in layout tree.
For malformed tables which only have cells with span greater than 1, the
content sizes for row and column aren't initialized to non-zero values.
Avoid undefined behavior in such cases, which sometimes show up on
Wikipedia.
Auto margins used together with justify-content would previously
result in children being positioned outside their parent. This was
solved by letting auto margins take precedence when they are used,
which was already implemented to some extent before, but not
fully.
Containers with both flex reverse and justify content would
sometimes place children outside the container. This happened
because it assumed any reversed container would have items
aligned to the right, which isn't true when using eg. `flex-end`.
Both `justify-content: start` and `justify-content: end` are now
also independent of the reverseness.
After switching to fixed-point arithmetic in CSSPixels, it no longer
supports representing infinite values, which was previously the case
for remaining_free_space in FFC. Using Optional that is not empty only
when value is finite to store remaining_free_space ensures that
infinity is avoided in layout calculations.
This fixes an assertion on https://amazon.com/ since WindowProxy
would advertise "0" as an own property key, but then act like it was
a bogus property when actually queried for it directly.
Before this change, we always derived a box's baseline from its last
child, even if the last child didn't have any line boxes inside.
This caused baselines to slip further down vertically than expected.
There are more baseline alignment issues to fix, but this one was
responsible for a fair chunk of trouble. :^)
After the CSSPixels implementation evolved from a wrapper of double
to a fixed-point saturated math arithmetic implementation, it makes
sense to have separate tests for it.
Using fixed-point saturated arithmetics for CSSPixels allows to avoid
accumulating floating-point errors.
This implementation is not complete yet: currently saturated
arithmetics implemented only for addition. But it is enough to not
regress any of layout tests we have :)
See https://github.com/SerenityOS/serenity/issues/18566
Follow the computing column measures section of the specification, which
gives an algorithm for setting intrinsic percentage widths when spanning
columns are involved.
Change how we store type of columns. It was used where the specification
only distinguishes between percent and everything else, so it makes more
sense to store and use it as a boolean.
The specification says we should distribute excess width proportionally
to the width of the cell, not to the preferred increment. Doing the
latter leads to distributing all excess width to just the cells which
demand some increment, even if it's very modest. Moreover, there's code
which partially implements the correct criteria just below the one we
remove here.
I added this file thinking it was necessary for the wpt run command.
However, it's only needed for updating expectations metadata. Since wpt
run always regenerates MANIFEST.json before updating expectations, we
can safely delete this file from the repository.
Once we've resolved the used flex item width & height, we should allow
percentage flex item sizes to resolve against them instead of forcing
flex items to always treat percentages as auto while doing intrinsic
sizing layout.
Regressed in 8dd489da61.
When specifying either `background-position-x: right` or
`background-position-y: bottom` without an offset value no
EdgeStyleValue was created.
However, the spec says the offset should be optional.
Now, if you do not provide an offset, it creates the EdgeStyleValue
with a default offset of 0 pixels.
We do this by piggybacking on FormattingContext helpers instead of
reinventing the wheel in FlexFormattingContext.
This fixes an issue where `min-width: fit-content` (and other
layout-dependent values) were treated as 0 on flex items.
This makes the cookie banners look okay on https://microsoft.com/ :^)
If an inline-block has a percentage height that relies on the auto
height of the containing block, it should always resolve to the
automatic height of the box, regardless of the percentage value. This
change may seem confusing, but it aligns with the behavior of other
engines.
Unlike all other primitives elliptical arcs are non-trivial to
manipulate, it's tricky to correctly apply a Gfx::AffineTransform to
them. Prior to this change, Path::copy_transformed() was still
incorrectly applying transforms such as flips and skews to arcs.
This patch very closely approximates arcs with cubic beziers (I can not
visually spot any differences), which can then be easily and correctly
transformed in all cases.
Most of the maths here was taken from:
https://mortoray.com/rendering-an-svg-elliptical-arc-as-bezier-curves/
(which came from https://www.joecridge.me/content/pdf/bezier-arcs.pdf,
now a dead link).
This test proves the ability of TransformStream to execute
caller supplied code in the flush callback, and have access to
TransformStreamDefaultController.
This test proves the ability of TransformStream to execute
caller supplied code in the start callback, and have access to
TransformStreamDefaultController.
This test proves the ability of TransformStream to execute to execute
caller supplied code in the transform callback that can transform
incoming chunks, and have access to TransformStreamDefaultController.
There are two parts to this fix:
- First, StyleProperties::transformations() would previously omit calc()
values entirely when returning the list of transformations. This was
very confusing to StackingContext which then tried to index into the
list based on faulty assumptions. Fix this by emitting calc values.
- Second, StackingContext::get_transformation_matrix() now always calls
resolve() on length-percentages. This takes care of actually resolving
calc() values. If no reference value for percentages is provided, we
default to 0px.
This stops LibWeb from asserting on websites with calc() in transform
values, such as https://qt.io/ :^)
This change implements following paragraph from placement algorithm in
the spec:
"If the largest column span among all the items without a definite
column position is larger than the width of the implicit grid, add
columns to the end of the implicit grid to accommodate that column
span."
There were places in the grid implementation code with copies of this
text, but those were completely unrelated to the code where they were
being pasted so I removed them.
Max width shouldn't be tied to min width, commit d33b99d went too far
and made them the same when the table-root had a specified percentage
width.
Fixes#19940.
Since the underlying HTML::Window can change, caching property accesses
on WindowProxy is not as simple as remembering the shape. Let's disable
caching here for now. We can come back to it in the future when we have
no low-hanging fruit left. :^)
Fixes an assertion failure on https://twinings.co.uk/
Make sure the insets and margins calculated according to the spec are
not later ignored and ad-hoc recomputed in
layout_absolutely_positioned_element.
Use the static position calculation in a couple of places where the
spec (and comment) was indicating it should be used.
Fixes#19362
The tests still pass, but opening the files in Ladybird and Safari or
Firefox shows clearly where the layouting in Ladybird is incorrect
for some absolute positioned elements. The previous 1px border was
subtly hiding some issues.
When the containing block has an indefinite width, any descendants with
a percentage size should resolve that against 0, not infinity.
Fixes an assertion failure when loading https://www.gnu.org/
We achieve this by making properties that accept a custom-ident value
skip the "someone else's vendor prefix" check for values that start with
a `-` character.
This fixes an issue where e.g `font-family: Arial, -apple-system` would
be rejected by the parser completely. We now treat `-apple-system` like
an identifier in such cases.
Also add `valid-types` metadata for the `font-family` property so this
actually works. :^)
When sizing under a max-content constraint, we allow flex lines to have
an infinite amount of "remaining space", but we shouldn't let infinity
leak into the geometry of items. So treat it as zero in arithmetic.
This fixes an issue where inline SVGs with natural aspect ratio (from
viewBox) but no natural width or height could get an infinite size as
flex items.
All of the following properties in the font shorthand can be `normal`:
- font-style
- font-variant
- font-weight
- font-stretch
This means that we must allow up to four consecutive `normal` at the
start of a font shorthand value.
This fixes an issue where a BOM at the head of a style sheet would be
passed verbatim to the parser, who would then interpret it as an ident
token and (after some confusion) fail to parse the first rule, but then
carry on with the rest of the sheet.
Anonymous wrapper boxes inherit style from their layout tree parent,
and since style data is per-layout-node, we have to manually sync them
from parent to anonymous children when something changes.
This is not very elegant or efficient, so I've left a FIXME about
solving it in a nicer way.
This fixes horizontal dog alignment on https://waffles.dog/ :^)
As it turns out, Layout::TreeBuilder never managed to wrap text within
table boxes in anonymous wrapper boxes, since it relied on checking
text_for_rendering(), and that was never initialized during that early
stage of tree building.
This patch fixes the issue by making text_for_rendering() compute the
(potentially collapsed) text lazily when called.
Note that the test included with this patch is still totally wrong,
but that is now a TFC problem rather than a TreeBuilder problem. :^)
There were multiple bugs in the parsing algorithm for handling text
occurring inside a `table` element:
- When there was pending non-whitespace text inside a table, we only
flushed one token instead of all pending tokens.
- Also, we didn't even flush one of the right tokens, but instead the
token that caused the flush to happen.
- Once we started flushing the right tokens, it turned out we had not
yet implemented character insertion points expressed as "before X".
- Finally, we were not exiting the "in table text" mode after flushing
pending tokens, effectively getting us stuck in that mode until EOF.
Computing the table width algorithm bifurcates based on whether
table-root width is auto. We only adjust the used table width based on
cell percentage widths on the auto branch, thus the same check is needed
when we initialize cell widths.
Cell percentage widths are relative to table width, not containing
block width. If the table width is auto, there isn't a normative
specification, only a brief mention that the user agent should try to
meet it.
As a starting point, we increase the width of the table such that it's
sufficient to cover min-width of cells with a percentage width. This
matches the behavior of other browsers, at least for simple cases.
This ensures that min-content contributions from cells with no content
are computed using their calculated values, which are never considered
for min-content before then. The specification diverges from column
measures algorithm, which doesn't use specified width of cells anywhere.
The CSS box-shadow property takes 2-4 properties that are `<length>`s,
those being:
- offset-x
- offset-y
- blur-radius
- spread-radius
Previously these were resolved directly to concrete Lengths at parse
time, but now they will be parsed as LengthStyleValues and/or
CalculatedStyleValues and be stored that way until styles are later
resolved.
The used width is already a content width, which doesn't include
borders. Border widths should be subtracted from the specified width
instead, since that initially specifies the total width including
borders, for consistent comparison. Also handle table box padding as an
additional fix.
On style update, we have to preserve the invariant established when we
built the layout tree - some properties are applied to the table wrapper
and the table box values are reset to their initial values.
This also ensures that the containing block of a table box is always a
table wrapper, which isn't the case if we set absolute position on the
box instead of the wrapper.
Fixes#19452.
This fixes the issue when size of abspos items is considered to be
resolvable without performing layout which is not correct in the
scenarious when top/right/bottom/left properties are not auto.
Return error when input svg is not valid and SVGSVGElement is not
present in the tree instead of doing svg_root nullptr dereference.
Fixes crash on https://apps.kde.org/en-gb/
Adding undistributable space right before setting the content width is
incorrect when it's a percentage. Follow the specification and add it to
GRIDMIN and GRIDMAX instead.
In particular, in BFC:
- Non-floating, non-replaced elements
- Floating, non-replaced elements
- Floating, replaced elements
The first two regressed in 1d76126abe
The third one seems to have been introduced by this regression, as it
was seemingly copied from compute_width_for_floating_box in
7f9ede07bc
The fix here has two parts:
1. Don't use the fallback viewBox at all if we're not in SVG-as-image.
2. Don't make a fallback viewBox with zero width and/or height.
This fixes a crash on Bandcamp pages. Thanks Tim Flynn for reporting!
The shortcut we put in place didn't resolve percentage widths and
ignored border spacing. We can still return early after we compute the
width per the specifications.
While CSS 2.2 does tell us to use the "auto height for BFC roots"
calculation when resolving auto heights for abspos elements, that
doesn't make sense for other formatting context roots, e.g flex.
In lieu of implementing the entire new absolute positioning model from
CSS-POSITION-3, this patch borrows one small nugget from it: using
fit-content height as the auto height for non-BFC-root abspos elements.
When embedding an SVG in an img element, if the external SVG's root
element has both width and height attributes, but no viewBox attribute,
we now create a fallback viewBox with "0 0 width height".
This appears to match the behavior of other browsers. Inspired by
discussion on Mozilla's bug tracker:
https://bugzilla.mozilla.org/show_bug.cgi?id=614649
If we don't paint, SVG-as-image documents don't get laid out, and so
have 0x0 size throughout.
This change is also generally nice, as it makes the painting code run
on all the layout tests, increasing coverage. :^)
Compute the contributions to a spanning cell width from each cell in the
span. This better handles uneven column widths, since each cell
contribution is proportional with its own width as opposed to the own
width of the first cell in the span.
This better matches the behavior of other browsers and further aligns
with the specification.
The part in FFC where we ask the parent formatting context to size the
flex container midway through layout is really weird, but let's at least
be consistently weird for BFC and IFC. Since IFC always works within its
parent BFC, it can simply forward these requests to the BFC.
This fixes an issue where inline-flex containers incorrectly had main
axis margins subtracted from their content size.
With multi-line text cells, we don't reliably know the height would stay
the same as the one set by the independent format context run. In such
situations, we can end up with a table box which is sized inconsistently
with the grid boxes of the table due to differences in line breaks.
In compute_table_box_width_inside_table_wrapper, we should only consider
available_width when it's valid. Values which come from {min,
max}-content constraints aren't meaningful and shouldn't be considered
for the cap.
Absolutely positioned elements should have their percentage sizes
resolved against the padding box of the containing block, not the
content box.
From CSS-POSITION-3 <https://www.w3.org/TR/css-position-3/#def-cb>
"..the containing block is formed by the padding edge of the ancestor.."
When resolving a percentage min-width or min-height size against a
containing block currently under a min-content constraint, we should act
as if the containing block has zero size in that axis.
"display: max-content" is not a thing. The test was actually not working
correctly, it just looked like it did. Now it has correct metrics for
the body element.
Since both the WebDriver and Browser API are currently unstable during
WPT tests, it's a good idea to make sure that WPT passes even if there
are unexpected results. This will help avoid having failures marked as
red in the CI system caused by flaky WPT tests.
This is technically "undefined behavior" per CSS 2.2, but it seems
sensible to mirror the behavior of max-height in the same situation.
It also appears to match how other engines behave.
Fixes#19242
