I noticed after upgrading my machine that the QEMU is no longer building
due to GCC enabling `-fcf-protection` by default, even for targets that
don't support it.
The included patch came from the QEMU development list, but hasn't be
included in any patch releases at the time of writing.
https://lore.kernel.org/all/20220208211937.79580-1-vineetg@rivosinc.com/
Until QEMU patches, lets fix it on our end by patching before we build.
Although we handle it in the linker spec file, gcc will actually reject
this argument unless it's also enabled in the option file.
CMake adds this flag if the minimum required version is 3.3 or less (see
CMP0065), so old projects would fail to compile because of this
unrecognized option.
This commit backports the LLVM commit that adds support for the
`--update-section` flag to llvm-objcopy. We use this feature of GNU
objcopy to embed the symbol map in the kernel.
The corresponding LLVM Phabricator Differential Revision can be found
here: https://reviews.llvm.org/D112116
This patch is identical to the upstream commit, except for two hunks
that had to be changed as they didn't apply cleanly.
Discord user aesophor pointed out that the GCC toolchain fails to build
on macOS, and traced the issue back to 41ea37f2, which is the latest
change to `gcc.patch`. Similarly, when I tried to run BuildIt.sh in the
`--dev` mode, `git apply` complained about the patch being malformed.
I regenerated the patch by manually applying the changes of 41ea37f2 on
top of a known good GCC source tree, and I sent the new file to them.
They reported that this fixed the build issue they were having.
I'm not even sure if this is a hack. However, we don't implement
memalign so it's necessary to tell GCC so it doesn't go looking for it
in their implementation of `new`
The `aarch64/t-aarch64` makefile fragment needs to be included for the
aarch64-specific parts of GCC to be built. Before 738e52da5, this was
done implicitly, but now it is not. This caused the following error when
building the toolchain: "aarch64-builtins.o: No such file or directory".
By setting CMAKE_MODULE_PATH in the LLVM initial cache scripts, we can
make the "SerenityOS" CMAKE_SYSTEM_NAME usable in the builds of
compiler-rt, libunwind, libcxxabi and libcxx.
This simplifies some toolchain patches and brings the cross-compiler
patches closer to the Port's patches, and closer to something
upstreamable.
If we pass `-lgcc_s` explicitly to the linker, it will be added as a
dependency even if no functions are used from it. This behavior is not
consistent with other systems. GCC can already handle passing the
correct flags, so let's rely on that instead.
As an added benefit, we now get support for the `-static-libgcc` flag;
and `-static-pie` will no longer mistakenly link us against the dynamic
version of libgcc.
No toolchain rebuild is required.
This will come in handy if we want to use the LLVM port with a GNU host
compiler.
As of version 13, libc++ uses `__attribute__((using_if_exists))` to
import global LibC functions into the `std` namespace, which allows some
symbols to be absent. GCC does not support this attribute, so it fails
to build libc++ due to some obscure `wchar.h` functions. This means that
cross-compiling libc++ is not possible; and on-target builds would be
tedious, so we'll be better off using the toolchain's `libstdc++`.
Serenity defines a protected range of memory that must not be mmapped,
and is apparently reserved for kernel tasks. In this case, the protected
range is anything below 0x800000.
However, in its default setting, binutils chooses the memory address
0x400000 as the mapping address for executables that do not have PIE
enabled, resulting in mmap being unable to map the file unless the load
address has been overwritten at link time or if it's a PIE.
To mitigate this, move the default base address somewhere outside of
that range (and preferably not anywhere close near the beginning of the
useable virtual memory space, to avoid running into it during sequential
allocations).
This commit updates the Clang toolchain's version to 13.0.0, which comes
with better C++20 support and improved handling of new features by
clang-format. Due to the newly enabled `-Bsymbolic-functions` flag, our
Clang binaries will only be 2-4% slower than if we dynamically linked
them, but we save hundreds of megabytes of disk space.
The `BuildClang.sh` script has been reworked to build the entire
toolchain in just three steps: one for the compiler, one for GNU
binutils, and one for the runtime libraries. This reduces the complexity
of the build script, and will allow us to modify the CI configuration to
only rebuild the libraries when our libc headers change.
Most of the compile flags have been moved out to a separate CMake cache
file, similarly to how the Android and Fuchsia toolchains are
implemented within the LLVM repo. This provides a nicer interface than
the heaps of command-line arguments.
We no longer build separate toolchains for each architecture, as the
same Clang binary can compile code for multiple targets.
The horrible mess that `SERENITY_CLANG_ARCH` was, has been removed in
this commit. Clang happily accepts an `i686-pc-serenity` target triple,
which matches what our GCC toolchain accepts.
I locally modified Meta/serenity.sh to pass `--dev` to BuildIt.sh
in build_toolchain(). Then I ran `Meta/serenity.sh rebuild-toolchain`,
cd'd into Toolchain/Tarballs/binutils-2.37, `git add`ed unadded files in
`git status`, and then ran `git diff > ../../Patches/binutils.patch`.
Then I did the same for Toolchain/Tarballs/gcc-11.2.0 (and was careful
not to `git add` serenity-kernel.h, since that's created by
Toolchain/BuildIt.sh).
No behavior change. This just rewrites the patch like git writes it.
This contains all the bits and pieces necessary to build a Clang binary
that will correctly compile SerenityOS.
I had some trouble with getting LLVM building with a single command, so
for now, I decided to build each LLVM component in a separate command
invocation. In the future, we can also make the main llvm build step
architecture-independent, but that would come with extra work to make
library and include paths work.
The binutils build invocation and related boilerplate is duplicated
because we only use `objdump` from GNU binutils in the Clang toolchain,
so most features can be disabled.
CMake specifies -arch arm64 for our toolchain. Unfortunately that's an
option GCC only understands when built for macOS. This causes the build
to fail.
I haven't been able to get CMake to not specify that option so this adds
a dummy option to GCC.
This makes stdlib.h and stdio.h functions available in the std
namespace for C++.
libstdc++v3's link tests can fail if you don't have an up-to-date
build directory, for example:
1. Have libc with missing _Exit symbol because you haven't done
a build since that was added.
2. Run toolchain rebuild. libstdc++v3's configure script will
realize that it can do link tests in general but will fail
later on when it tries to link a program that tests for _Exit.
Even though this is a toolchain patch this does not necessarily
require rebuilding the toolchain right away. This is only required
once we start using any of these new members in the std namespace,
e.g. for ports.
This fixes the -nodefaultlibs flag for gcc which previously
linked against libgcc_s anyway. Even though this is a toolchain
patch we don't need to rebuild the toolchain right away.
Ordinarily this would force the compiler to not inline certain
symbols and call them via the PLT instead. To counteract this
I've also added -fno-semantic-interposition which disables
ELF symbol interposition. Our dynamic loader doesn't support
this anyway and we might even consider not implementing this
at all.
Even though this is a toolchain change this doesn't require
rebuilding the toolchain unless you're planning to build
for the x86_64 arch.
Previously the toolchain's binutils would not have been able to
build binaries on 32-bit host systems (not that this would be
much of an issue nowadays) because one of the #ifdefs was in
the wrong place.
I moved the #ifdef in the port's patch and this now updates
the toolchain's patch file to match the port's patch.
This enables building usermode programs with exception handling. It also
builds a libstdc++ without exception support for the kernel.
This is necessary because the libstdc++ that gets built is different
when exceptions are enabled. Using the same library binary would
require extensive stubs for exception-related functionality in the
kernel.
Instead GCC should be used to automatically link against crt0
and crt0_shared depending on the type of object file that is being
built.
Unfortunately this requires a rebuild of the toolchain as well
as everything that has been built with the old GCC.
Our TLS implementation relies on the TLS model being "initial-exec".
We previously enforced this by adding the '-ftls-model=initial-exec'
flag in the root CmakeLists file, but that did not affect ports - So
now we put that flag in the gcc spec files.
Closes#5366
We now configure gcc to always use the -fno-exceptions flag.
This does not affect our code since we do not use exceptions, and also
fixes the gcc port.
We now configure the gcc spec files to use a different crt files for
static & PIE binaries.
This relieves us from the need to explicitly specify the desired crt0
file in cmake scripts.