From a4db4bca621c209061e65424a950b8648189a63c Mon Sep 17 00:00:00 2001 From: James Turland Date: Sun, 21 Apr 2024 00:04:35 +0100 Subject: [PATCH] mosquitto --- Mosquitto/conf | 904 ++++++++++++++++++++++++++++++++++ Mosquitto/docker-compose.yaml | 19 + Mosquitto/mosquitto.conf | 8 + 3 files changed, 931 insertions(+) create mode 100644 Mosquitto/conf create mode 100644 Mosquitto/docker-compose.yaml create mode 100644 Mosquitto/mosquitto.conf diff --git a/Mosquitto/conf b/Mosquitto/conf new file mode 100644 index 0000000..e691880 --- /dev/null +++ b/Mosquitto/conf @@ -0,0 +1,904 @@ +# Config file for mosquitto +# +# See mosquitto.conf(5) for more information. +# +# Default values are shown, uncomment to change. +# +# Use the # character to indicate a comment, but only if it is the +# very first character on the line. + +# ================================================================= +# General configuration +# ================================================================= + +# Use per listener security settings. +# +# It is recommended this option be set before any other options. +# +# If this option is set to true, then all authentication and access control +# options are controlled on a per listener basis. The following options are +# affected: +# +# acl_file +# allow_anonymous +# allow_zero_length_clientid +# auto_id_prefix +# password_file +# plugin +# plugin_opt_* +# psk_file +# +# Note that if set to true, then a durable client (i.e. with clean session set +# to false) that has disconnected will use the ACL settings defined for the +# listener that it was most recently connected to. +# +# The default behaviour is for this to be set to false, which maintains the +# setting behaviour from previous versions of mosquitto. +#per_listener_settings false + + +# This option controls whether a client is allowed to connect with a zero +# length client id or not. This option only affects clients using MQTT v3.1.1 +# and later. If set to false, clients connecting with a zero length client id +# are disconnected. If set to true, clients will be allocated a client id by +# the broker. This means it is only useful for clients with clean session set +# to true. +#allow_zero_length_clientid true + +# If allow_zero_length_clientid is true, this option allows you to set a prefix +# to automatically generated client ids to aid visibility in logs. +# Defaults to 'auto-' +#auto_id_prefix auto- + +# This option affects the scenario when a client subscribes to a topic that has +# retained messages. It is possible that the client that published the retained +# message to the topic had access at the time they published, but that access +# has been subsequently removed. If check_retain_source is set to true, the +# default, the source of a retained message will be checked for access rights +# before it is republished. When set to false, no check will be made and the +# retained message will always be published. This affects all listeners. +#check_retain_source true + +# QoS 1 and 2 messages will be allowed inflight per client until this limit +# is exceeded. Defaults to 0. (No maximum) +# See also max_inflight_messages +#max_inflight_bytes 0 + +# The maximum number of QoS 1 and 2 messages currently inflight per +# client. +# This includes messages that are partway through handshakes and +# those that are being retried. Defaults to 20. Set to 0 for no +# maximum. Setting to 1 will guarantee in-order delivery of QoS 1 +# and 2 messages. +#max_inflight_messages 20 + +# For MQTT v5 clients, it is possible to have the server send a "server +# keepalive" value that will override the keepalive value set by the client. +# This is intended to be used as a mechanism to say that the server will +# disconnect the client earlier than it anticipated, and that the client should +# use the new keepalive value. The max_keepalive option allows you to specify +# that clients may only connect with keepalive less than or equal to this +# value, otherwise they will be sent a server keepalive telling them to use +# max_keepalive. This only applies to MQTT v5 clients. The default, and maximum +# value allowable, is 65535. +# +# Set to 0 to allow clients to set keepalive = 0, which means no keepalive +# checks are made and the client will never be disconnected by the broker if no +# messages are received. You should be very sure this is the behaviour that you +# want. +# +# For MQTT v3.1.1 and v3.1 clients, there is no mechanism to tell the client +# what keepalive value they should use. If an MQTT v3.1.1 or v3.1 client +# specifies a keepalive time greater than max_keepalive they will be sent a +# CONNACK message with the "identifier rejected" reason code, and disconnected. +# +#max_keepalive 65535 + +# For MQTT v5 clients, it is possible to have the server send a "maximum packet +# size" value that will instruct the client it will not accept MQTT packets +# with size greater than max_packet_size bytes. This applies to the full MQTT +# packet, not just the payload. Setting this option to a positive value will +# set the maximum packet size to that number of bytes. If a client sends a +# packet which is larger than this value, it will be disconnected. This applies +# to all clients regardless of the protocol version they are using, but v3.1.1 +# and earlier clients will of course not have received the maximum packet size +# information. Defaults to no limit. Setting below 20 bytes is forbidden +# because it is likely to interfere with ordinary client operation, even with +# very small payloads. +#max_packet_size 0 + +# QoS 1 and 2 messages above those currently in-flight will be queued per +# client until this limit is exceeded. Defaults to 0. (No maximum) +# See also max_queued_messages. +# If both max_queued_messages and max_queued_bytes are specified, packets will +# be queued until the first limit is reached. +#max_queued_bytes 0 + +# Set the maximum QoS supported. Clients publishing at a QoS higher than +# specified here will be disconnected. +#max_qos 2 + +# The maximum number of QoS 1 and 2 messages to hold in a queue per client +# above those that are currently in-flight. Defaults to 1000. Set +# to 0 for no maximum (not recommended). +# See also queue_qos0_messages. +# See also max_queued_bytes. +#max_queued_messages 1000 +# +# This option sets the maximum number of heap memory bytes that the broker will +# allocate, and hence sets a hard limit on memory use by the broker. Memory +# requests that exceed this value will be denied. The effect will vary +# depending on what has been denied. If an incoming message is being processed, +# then the message will be dropped and the publishing client will be +# disconnected. If an outgoing message is being sent, then the individual +# message will be dropped and the receiving client will be disconnected. +# Defaults to no limit. +#memory_limit 0 + +# This option sets the maximum publish payload size that the broker will allow. +# Received messages that exceed this size will not be accepted by the broker. +# The default value is 0, which means that all valid MQTT messages are +# accepted. MQTT imposes a maximum payload size of 268435455 bytes. +#message_size_limit 0 + +# This option allows the session of persistent clients (those with clean +# session set to false) that are not currently connected to be removed if they +# do not reconnect within a certain time frame. This is a non-standard option +# in MQTT v3.1. MQTT v3.1.1 and v5.0 allow brokers to remove client sessions. +# +# Badly designed clients may set clean session to false whilst using a randomly +# generated client id. This leads to persistent clients that connect once and +# never reconnect. This option allows these clients to be removed. This option +# allows persistent clients (those with clean session set to false) to be +# removed if they do not reconnect within a certain time frame. +# +# The expiration period should be an integer followed by one of h d w m y for +# hour, day, week, month and year respectively. For example +# +# persistent_client_expiration 2m +# persistent_client_expiration 14d +# persistent_client_expiration 1y +# +# The default if not set is to never expire persistent clients. +#persistent_client_expiration + +# Write process id to a file. Default is a blank string which means +# a pid file shouldn't be written. +# This should be set to /var/run/mosquitto/mosquitto.pid if mosquitto is +# being run automatically on boot with an init script and +# start-stop-daemon or similar. +#pid_file + +# Set to true to queue messages with QoS 0 when a persistent client is +# disconnected. These messages are included in the limit imposed by +# max_queued_messages and max_queued_bytes +# Defaults to false. +# This is a non-standard option for the MQTT v3.1 spec but is allowed in +# v3.1.1. +#queue_qos0_messages false + +# Set to false to disable retained message support. If a client publishes a +# message with the retain bit set, it will be disconnected if this is set to +# false. +#retain_available true + +# Disable Nagle's algorithm on client sockets. This has the effect of reducing +# latency of individual messages at the potential cost of increasing the number +# of packets being sent. +#set_tcp_nodelay false + +# Time in seconds between updates of the $SYS tree. +# Set to 0 to disable the publishing of the $SYS tree. +#sys_interval 10 + +# The MQTT specification requires that the QoS of a message delivered to a +# subscriber is never upgraded to match the QoS of the subscription. Enabling +# this option changes this behaviour. If upgrade_outgoing_qos is set true, +# messages sent to a subscriber will always match the QoS of its subscription. +# This is a non-standard option explicitly disallowed by the spec. +#upgrade_outgoing_qos false + +# When run as root, drop privileges to this user and its primary +# group. +# Set to root to stay as root, but this is not recommended. +# If set to "mosquitto", or left unset, and the "mosquitto" user does not exist +# then it will drop privileges to the "nobody" user instead. +# If run as a non-root user, this setting has no effect. +# Note that on Windows this has no effect and so mosquitto should be started by +# the user you wish it to run as. +#user mosquitto + +# ================================================================= +# Listeners +# ================================================================= + +# Listen on a port/ip address combination. By using this variable +# multiple times, mosquitto can listen on more than one port. If +# this variable is used and neither bind_address nor port given, +# then the default listener will not be started. +# The port number to listen on must be given. Optionally, an ip +# address or host name may be supplied as a second argument. In +# this case, mosquitto will attempt to bind the listener to that +# address and so restrict access to the associated network and +# interface. By default, mosquitto will listen on all interfaces. +# Note that for a websockets listener it is not possible to bind to a host +# name. +# +# On systems that support Unix Domain Sockets, it is also possible +# to create a # Unix socket rather than opening a TCP socket. In +# this case, the port number should be set to 0 and a unix socket +# path must be provided, e.g. +# listener 0 /tmp/mosquitto.sock +# +# listener port-number [ip address/host name/unix socket path] +#listener + +# By default, a listener will attempt to listen on all supported IP protocol +# versions. If you do not have an IPv4 or IPv6 interface you may wish to +# disable support for either of those protocol versions. In particular, note +# that due to the limitations of the websockets library, it will only ever +# attempt to open IPv6 sockets if IPv6 support is compiled in, and so will fail +# if IPv6 is not available. +# +# Set to `ipv4` to force the listener to only use IPv4, or set to `ipv6` to +# force the listener to only use IPv6. If you want support for both IPv4 and +# IPv6, then do not use the socket_domain option. +# +#socket_domain + +# Bind the listener to a specific interface. This is similar to +# the [ip address/host name] part of the listener definition, but is useful +# when an interface has multiple addresses or the address may change. If used +# with the [ip address/host name] part of the listener definition, then the +# bind_interface option will take priority. +# Not available on Windows. +# +# Example: bind_interface eth0 +#bind_interface + +# When a listener is using the websockets protocol, it is possible to serve +# http data as well. Set http_dir to a directory which contains the files you +# wish to serve. If this option is not specified, then no normal http +# connections will be possible. +#http_dir + +# The maximum number of client connections to allow. This is +# a per listener setting. +# Default is -1, which means unlimited connections. +# Note that other process limits mean that unlimited connections +# are not really possible. Typically the default maximum number of +# connections possible is around 1024. +#max_connections -1 + +# The listener can be restricted to operating within a topic hierarchy using +# the mount_point option. This is achieved be prefixing the mount_point string +# to all topics for any clients connected to this listener. This prefixing only +# happens internally to the broker; the client will not see the prefix. +#mount_point + +# Choose the protocol to use when listening. +# This can be either mqtt or websockets. +# Certificate based TLS may be used with websockets, except that only the +# cafile, certfile, keyfile, ciphers, and ciphers_tls13 options are supported. +#protocol mqtt + +# Set use_username_as_clientid to true to replace the clientid that a client +# connected with with its username. This allows authentication to be tied to +# the clientid, which means that it is possible to prevent one client +# disconnecting another by using the same clientid. +# If a client connects with no username it will be disconnected as not +# authorised when this option is set to true. +# Do not use in conjunction with clientid_prefixes. +# See also use_identity_as_username. +# This does not apply globally, but on a per-listener basis. +#use_username_as_clientid + +# Change the websockets headers size. This is a global option, it is not +# possible to set per listener. This option sets the size of the buffer used in +# the libwebsockets library when reading HTTP headers. If you are passing large +# header data such as cookies then you may need to increase this value. If left +# unset, or set to 0, then the default of 1024 bytes will be used. +#websockets_headers_size + +# ----------------------------------------------------------------- +# Certificate based SSL/TLS support +# ----------------------------------------------------------------- +# The following options can be used to enable certificate based SSL/TLS support +# for this listener. Note that the recommended port for MQTT over TLS is 8883, +# but this must be set manually. +# +# See also the mosquitto-tls man page and the "Pre-shared-key based SSL/TLS +# support" section. Only one of certificate or PSK encryption support can be +# enabled for any listener. + +# Both of certfile and keyfile must be defined to enable certificate based +# TLS encryption. + +# Path to the PEM encoded server certificate. +#certfile + +# Path to the PEM encoded keyfile. +#keyfile + +# If you wish to control which encryption ciphers are used, use the ciphers +# option. The list of available ciphers can be optained using the "openssl +# ciphers" command and should be provided in the same format as the output of +# that command. This applies to TLS 1.2 and earlier versions only. Use +# ciphers_tls1.3 for TLS v1.3. +#ciphers + +# Choose which TLS v1.3 ciphersuites are used for this listener. +# Defaults to "TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256" +#ciphers_tls1.3 + +# If you have require_certificate set to true, you can create a certificate +# revocation list file to revoke access to particular client certificates. If +# you have done this, use crlfile to point to the PEM encoded revocation file. +#crlfile + +# To allow the use of ephemeral DH key exchange, which provides forward +# security, the listener must load DH parameters. This can be specified with +# the dhparamfile option. The dhparamfile can be generated with the command +# e.g. "openssl dhparam -out dhparam.pem 2048" +#dhparamfile + +# By default an TLS enabled listener will operate in a similar fashion to a +# https enabled web server, in that the server has a certificate signed by a CA +# and the client will verify that it is a trusted certificate. The overall aim +# is encryption of the network traffic. By setting require_certificate to true, +# the client must provide a valid certificate in order for the network +# connection to proceed. This allows access to the broker to be controlled +# outside of the mechanisms provided by MQTT. +#require_certificate false + +# cafile and capath define methods of accessing the PEM encoded +# Certificate Authority certificates that will be considered trusted when +# checking incoming client certificates. +# cafile defines the path to a file containing the CA certificates. +# capath defines a directory that will be searched for files +# containing the CA certificates. For capath to work correctly, the +# certificate files must have ".crt" as the file ending and you must run +# "openssl rehash " each time you add/remove a certificate. +#cafile +#capath + + +# If require_certificate is true, you may set use_identity_as_username to true +# to use the CN value from the client certificate as a username. If this is +# true, the password_file option will not be used for this listener. +#use_identity_as_username false + +# ----------------------------------------------------------------- +# Pre-shared-key based SSL/TLS support +# ----------------------------------------------------------------- +# The following options can be used to enable PSK based SSL/TLS support for +# this listener. Note that the recommended port for MQTT over TLS is 8883, but +# this must be set manually. +# +# See also the mosquitto-tls man page and the "Certificate based SSL/TLS +# support" section. Only one of certificate or PSK encryption support can be +# enabled for any listener. + +# The psk_hint option enables pre-shared-key support for this listener and also +# acts as an identifier for this listener. The hint is sent to clients and may +# be used locally to aid authentication. The hint is a free form string that +# doesn't have much meaning in itself, so feel free to be creative. +# If this option is provided, see psk_file to define the pre-shared keys to be +# used or create a security plugin to handle them. +#psk_hint + +# When using PSK, the encryption ciphers used will be chosen from the list of +# available PSK ciphers. If you want to control which ciphers are available, +# use the "ciphers" option. The list of available ciphers can be optained +# using the "openssl ciphers" command and should be provided in the same format +# as the output of that command. +#ciphers + +# Set use_identity_as_username to have the psk identity sent by the client used +# as its username. Authentication will be carried out using the PSK rather than +# the MQTT username/password and so password_file will not be used for this +# listener. +#use_identity_as_username false + + +# ================================================================= +# Persistence +# ================================================================= + +# If persistence is enabled, save the in-memory database to disk +# every autosave_interval seconds. If set to 0, the persistence +# database will only be written when mosquitto exits. See also +# autosave_on_changes. +# Note that writing of the persistence database can be forced by +# sending mosquitto a SIGUSR1 signal. +#autosave_interval 1800 + +# If true, mosquitto will count the number of subscription changes, retained +# messages received and queued messages and if the total exceeds +# autosave_interval then the in-memory database will be saved to disk. +# If false, mosquitto will save the in-memory database to disk by treating +# autosave_interval as a time in seconds. +#autosave_on_changes false + +# Save persistent message data to disk (true/false). +# This saves information about all messages, including +# subscriptions, currently in-flight messages and retained +# messages. +# retained_persistence is a synonym for this option. +#persistence false + +# The filename to use for the persistent database, not including +# the path. +#persistence_file mosquitto.db + +# Location for persistent database. +# Default is an empty string (current directory). +# Set to e.g. /var/lib/mosquitto if running as a proper service on Linux or +# similar. +#persistence_location + + +# ================================================================= +# Logging +# ================================================================= + +# Places to log to. Use multiple log_dest lines for multiple +# logging destinations. +# Possible destinations are: stdout stderr syslog topic file dlt +# +# stdout and stderr log to the console on the named output. +# +# syslog uses the userspace syslog facility which usually ends up +# in /var/log/messages or similar. +# +# topic logs to the broker topic '$SYS/broker/log/', +# where severity is one of D, E, W, N, I, M which are debug, error, +# warning, notice, information and message. Message type severity is used by +# the subscribe/unsubscribe log_types and publishes log messages to +# $SYS/broker/log/M/susbcribe or $SYS/broker/log/M/unsubscribe. +# +# The file destination requires an additional parameter which is the file to be +# logged to, e.g. "log_dest file /var/log/mosquitto.log". The file will be +# closed and reopened when the broker receives a HUP signal. Only a single file +# destination may be configured. +# +# The dlt destination is for the automotive `Diagnostic Log and Trace` tool. +# This requires that Mosquitto has been compiled with DLT support. +# +# Note that if the broker is running as a Windows service it will default to +# "log_dest none" and neither stdout nor stderr logging is available. +# Use "log_dest none" if you wish to disable logging. +#log_dest stderr + +# Types of messages to log. Use multiple log_type lines for logging +# multiple types of messages. +# Possible types are: debug, error, warning, notice, information, +# none, subscribe, unsubscribe, websockets, all. +# Note that debug type messages are for decoding the incoming/outgoing +# network packets. They are not logged in "topics". +#log_type error +#log_type warning +#log_type notice +#log_type information + + +# If set to true, client connection and disconnection messages will be included +# in the log. +#connection_messages true + +# If using syslog logging (not on Windows), messages will be logged to the +# "daemon" facility by default. Use the log_facility option to choose which of +# local0 to local7 to log to instead. The option value should be an integer +# value, e.g. "log_facility 5" to use local5. +#log_facility + +# If set to true, add a timestamp value to each log message. +#log_timestamp true + +# Set the format of the log timestamp. If left unset, this is the number of +# seconds since the Unix epoch. +# This is a free text string which will be passed to the strftime function. To +# get an ISO 8601 datetime, for example: +# log_timestamp_format %Y-%m-%dT%H:%M:%S +#log_timestamp_format + +# Change the websockets logging level. This is a global option, it is not +# possible to set per listener. This is an integer that is interpreted by +# libwebsockets as a bit mask for its lws_log_levels enum. See the +# libwebsockets documentation for more details. "log_type websockets" must also +# be enabled. +#websockets_log_level 0 + + +# ================================================================= +# Security +# ================================================================= + +# If set, only clients that have a matching prefix on their +# clientid will be allowed to connect to the broker. By default, +# all clients may connect. +# For example, setting "secure-" here would mean a client "secure- +# client" could connect but another with clientid "mqtt" couldn't. +#clientid_prefixes + +# Boolean value that determines whether clients that connect +# without providing a username are allowed to connect. If set to +# false then a password file should be created (see the +# password_file option) to control authenticated client access. +# +# Defaults to false, unless there are no listeners defined in the configuration +# file, in which case it is set to true, but connections are only allowed from +# the local machine. +#allow_anonymous false + +# ----------------------------------------------------------------- +# Default authentication and topic access control +# ----------------------------------------------------------------- + +# Control access to the broker using a password file. This file can be +# generated using the mosquitto_passwd utility. If TLS support is not compiled +# into mosquitto (it is recommended that TLS support should be included) then +# plain text passwords are used, in which case the file should be a text file +# with lines in the format: +# username:password +# The password (and colon) may be omitted if desired, although this +# offers very little in the way of security. +# +# See the TLS client require_certificate and use_identity_as_username options +# for alternative authentication options. If a plugin is used as well as +# password_file, the plugin check will be made first. +#password_file + +# Access may also be controlled using a pre-shared-key file. This requires +# TLS-PSK support and a listener configured to use it. The file should be text +# lines in the format: +# identity:key +# The key should be in hexadecimal format without a leading "0x". +# If an plugin is used as well, the plugin check will be made first. +#psk_file + +# Control access to topics on the broker using an access control list +# file. If this parameter is defined then only the topics listed will +# have access. +# If the first character of a line of the ACL file is a # it is treated as a +# comment. +# Topic access is added with lines of the format: +# +# topic [read|write|readwrite|deny] +# +# The access type is controlled using "read", "write", "readwrite" or "deny". +# This parameter is optional (unless contains a space character) - if +# not given then the access is read/write. can contain the + or # +# wildcards as in subscriptions. +# +# The "deny" option can used to explicity deny access to a topic that would +# otherwise be granted by a broader read/write/readwrite statement. Any "deny" +# topics are handled before topics that grant read/write access. +# +# The first set of topics are applied to anonymous clients, assuming +# allow_anonymous is true. User specific topic ACLs are added after a +# user line as follows: +# +# user +# +# The username referred to here is the same as in password_file. It is +# not the clientid. +# +# +# If is also possible to define ACLs based on pattern substitution within the +# topic. The patterns available for substition are: +# +# %c to match the client id of the client +# %u to match the username of the client +# +# The substitution pattern must be the only text for that level of hierarchy. +# +# The form is the same as for the topic keyword, but using pattern as the +# keyword. +# Pattern ACLs apply to all users even if the "user" keyword has previously +# been given. +# +# If using bridges with usernames and ACLs, connection messages can be allowed +# with the following pattern: +# pattern write $SYS/broker/connection/%c/state +# +# pattern [read|write|readwrite] +# +# Example: +# +# pattern write sensor/%u/data +# +# If an plugin is used as well as acl_file, the plugin check will be +# made first. +#acl_file + +# ----------------------------------------------------------------- +# External authentication and topic access plugin options +# ----------------------------------------------------------------- + +# External authentication and access control can be supported with the +# plugin option. This is a path to a loadable plugin. See also the +# plugin_opt_* options described below. +# +# The plugin option can be specified multiple times to load multiple +# plugins. The plugins will be processed in the order that they are specified +# here. If the plugin option is specified alongside either of +# password_file or acl_file then the plugin checks will be made first. +# +# If the per_listener_settings option is false, the plugin will be apply to all +# listeners. If per_listener_settings is true, then the plugin will apply to +# the current listener being defined only. +# +# This option is also available as `auth_plugin`, but this use is deprecated +# and will be removed in the future. +# +#plugin + +# If the plugin option above is used, define options to pass to the +# plugin here as described by the plugin instructions. All options named +# using the format plugin_opt_* will be passed to the plugin, for example: +# +# This option is also available as `auth_opt_*`, but this use is deprecated +# and will be removed in the future. +# +# plugin_opt_db_host +# plugin_opt_db_port +# plugin_opt_db_username +# plugin_opt_db_password + + +# ================================================================= +# Bridges +# ================================================================= + +# A bridge is a way of connecting multiple MQTT brokers together. +# Create a new bridge using the "connection" option as described below. Set +# options for the bridges using the remaining parameters. You must specify the +# address and at least one topic to subscribe to. +# +# Each connection must have a unique name. +# +# The address line may have multiple host address and ports specified. See +# below in the round_robin description for more details on bridge behaviour if +# multiple addresses are used. Note that if you use an IPv6 address, then you +# are required to specify a port. +# +# The direction that the topic will be shared can be chosen by +# specifying out, in or both, where the default value is out. +# The QoS level of the bridged communication can be specified with the next +# topic option. The default QoS level is 0, to change the QoS the topic +# direction must also be given. +# +# The local and remote prefix options allow a topic to be remapped when it is +# bridged to/from the remote broker. This provides the ability to place a topic +# tree in an appropriate location. +# +# For more details see the mosquitto.conf man page. +# +# Multiple topics can be specified per connection, but be careful +# not to create any loops. +# +# If you are using bridges with cleansession set to false (the default), then +# you may get unexpected behaviour from incoming topics if you change what +# topics you are subscribing to. This is because the remote broker keeps the +# subscription for the old topic. If you have this problem, connect your bridge +# with cleansession set to true, then reconnect with cleansession set to false +# as normal. +#connection +#address [:] [[:]] +#topic [[[out | in | both] qos-level] local-prefix remote-prefix] + +# If you need to have the bridge connect over a particular network interface, +# use bridge_bind_address to tell the bridge which local IP address the socket +# should bind to, e.g. `bridge_bind_address 192.168.1.10` +#bridge_bind_address + +# If a bridge has topics that have "out" direction, the default behaviour is to +# send an unsubscribe request to the remote broker on that topic. This means +# that changing a topic direction from "in" to "out" will not keep receiving +# incoming messages. Sending these unsubscribe requests is not always +# desirable, setting bridge_attempt_unsubscribe to false will disable sending +# the unsubscribe request. +#bridge_attempt_unsubscribe true + +# Set the version of the MQTT protocol to use with for this bridge. Can be one +# of mqttv50, mqttv311 or mqttv31. Defaults to mqttv311. +#bridge_protocol_version mqttv311 + +# Set the clean session variable for this bridge. +# When set to true, when the bridge disconnects for any reason, all +# messages and subscriptions will be cleaned up on the remote +# broker. Note that with cleansession set to true, there may be a +# significant amount of retained messages sent when the bridge +# reconnects after losing its connection. +# When set to false, the subscriptions and messages are kept on the +# remote broker, and delivered when the bridge reconnects. +#cleansession false + +# Set the amount of time a bridge using the lazy start type must be idle before +# it will be stopped. Defaults to 60 seconds. +#idle_timeout 60 + +# Set the keepalive interval for this bridge connection, in +# seconds. +#keepalive_interval 60 + +# Set the clientid to use on the local broker. If not defined, this defaults to +# 'local.'. If you are bridging a broker to itself, it is important +# that local_clientid and clientid do not match. +#local_clientid + +# If set to true, publish notification messages to the local and remote brokers +# giving information about the state of the bridge connection. Retained +# messages are published to the topic $SYS/broker/connection//state +# unless the notification_topic option is used. +# If the message is 1 then the connection is active, or 0 if the connection has +# failed. +# This uses the last will and testament feature. +#notifications true + +# Choose the topic on which notification messages for this bridge are +# published. If not set, messages are published on the topic +# $SYS/broker/connection//state +#notification_topic + +# Set the client id to use on the remote end of this bridge connection. If not +# defined, this defaults to 'name.hostname' where name is the connection name +# and hostname is the hostname of this computer. +# This replaces the old "clientid" option to avoid confusion. "clientid" +# remains valid for the time being. +#remote_clientid + +# Set the password to use when connecting to a broker that requires +# authentication. This option is only used if remote_username is also set. +# This replaces the old "password" option to avoid confusion. "password" +# remains valid for the time being. +#remote_password + +# Set the username to use when connecting to a broker that requires +# authentication. +# This replaces the old "username" option to avoid confusion. "username" +# remains valid for the time being. +#remote_username + +# Set the amount of time a bridge using the automatic start type will wait +# until attempting to reconnect. +# This option can be configured to use a constant delay time in seconds, or to +# use a backoff mechanism based on "Decorrelated Jitter", which adds a degree +# of randomness to when the restart occurs. +# +# Set a constant timeout of 20 seconds: +# restart_timeout 20 +# +# Set backoff with a base (start value) of 10 seconds and a cap (upper limit) of +# 60 seconds: +# restart_timeout 10 30 +# +# Defaults to jitter with a base of 5 and cap of 30 +#restart_timeout 5 30 + +# If the bridge has more than one address given in the address/addresses +# configuration, the round_robin option defines the behaviour of the bridge on +# a failure of the bridge connection. If round_robin is false, the default +# value, then the first address is treated as the main bridge connection. If +# the connection fails, the other secondary addresses will be attempted in +# turn. Whilst connected to a secondary bridge, the bridge will periodically +# attempt to reconnect to the main bridge until successful. +# If round_robin is true, then all addresses are treated as equals. If a +# connection fails, the next address will be tried and if successful will +# remain connected until it fails +#round_robin false + +# Set the start type of the bridge. This controls how the bridge starts and +# can be one of three types: automatic, lazy and once. Note that RSMB provides +# a fourth start type "manual" which isn't currently supported by mosquitto. +# +# "automatic" is the default start type and means that the bridge connection +# will be started automatically when the broker starts and also restarted +# after a short delay (30 seconds) if the connection fails. +# +# Bridges using the "lazy" start type will be started automatically when the +# number of queued messages exceeds the number set with the "threshold" +# parameter. It will be stopped automatically after the time set by the +# "idle_timeout" parameter. Use this start type if you wish the connection to +# only be active when it is needed. +# +# A bridge using the "once" start type will be started automatically when the +# broker starts but will not be restarted if the connection fails. +#start_type automatic + +# Set the number of messages that need to be queued for a bridge with lazy +# start type to be restarted. Defaults to 10 messages. +# Must be less than max_queued_messages. +#threshold 10 + +# If try_private is set to true, the bridge will attempt to indicate to the +# remote broker that it is a bridge not an ordinary client. If successful, this +# means that loop detection will be more effective and that retained messages +# will be propagated correctly. Not all brokers support this feature so it may +# be necessary to set try_private to false if your bridge does not connect +# properly. +#try_private true + +# Some MQTT brokers do not allow retained messages. MQTT v5 gives a mechanism +# for brokers to tell clients that they do not support retained messages, but +# this is not possible for MQTT v3.1.1 or v3.1. If you need to bridge to a +# v3.1.1 or v3.1 broker that does not support retained messages, set the +# bridge_outgoing_retain option to false. This will remove the retain bit on +# all outgoing messages to that bridge, regardless of any other setting. +#bridge_outgoing_retain true + +# If you wish to restrict the size of messages sent to a remote bridge, use the +# bridge_max_packet_size option. This sets the maximum number of bytes for +# the total message, including headers and payload. +# Note that MQTT v5 brokers may provide their own maximum-packet-size property. +# In this case, the smaller of the two limits will be used. +# Set to 0 for "unlimited". +#bridge_max_packet_size 0 + + +# ----------------------------------------------------------------- +# Certificate based SSL/TLS support +# ----------------------------------------------------------------- +# Either bridge_cafile or bridge_capath must be defined to enable TLS support +# for this bridge. +# bridge_cafile defines the path to a file containing the +# Certificate Authority certificates that have signed the remote broker +# certificate. +# bridge_capath defines a directory that will be searched for files containing +# the CA certificates. For bridge_capath to work correctly, the certificate +# files must have ".crt" as the file ending and you must run "openssl rehash +# " each time you add/remove a certificate. +#bridge_cafile +#bridge_capath + + +# If the remote broker has more than one protocol available on its port, e.g. +# MQTT and WebSockets, then use bridge_alpn to configure which protocol is +# requested. Note that WebSockets support for bridges is not yet available. +#bridge_alpn + +# When using certificate based encryption, bridge_insecure disables +# verification of the server hostname in the server certificate. This can be +# useful when testing initial server configurations, but makes it possible for +# a malicious third party to impersonate your server through DNS spoofing, for +# example. Use this option in testing only. If you need to resort to using this +# option in a production environment, your setup is at fault and there is no +# point using encryption. +#bridge_insecure false + +# Path to the PEM encoded client certificate, if required by the remote broker. +#bridge_certfile + +# Path to the PEM encoded client private key, if required by the remote broker. +#bridge_keyfile + +# ----------------------------------------------------------------- +# PSK based SSL/TLS support +# ----------------------------------------------------------------- +# Pre-shared-key encryption provides an alternative to certificate based +# encryption. A bridge can be configured to use PSK with the bridge_identity +# and bridge_psk options. These are the client PSK identity, and pre-shared-key +# in hexadecimal format with no "0x". Only one of certificate and PSK based +# encryption can be used on one +# bridge at once. +#bridge_identity +#bridge_psk + + +# ================================================================= +# External config files +# ================================================================= + +# External configuration files may be included by using the +# include_dir option. This defines a directory that will be searched +# for config files. All files that end in '.conf' will be loaded as +# a configuration file. It is best to have this as the last option +# in the main file. This option will only be processed from the main +# configuration file. The directory specified must not contain the +# main configuration file. +# Files within include_dir will be loaded sorted in case-sensitive +# alphabetical order, with capital letters ordered first. If this option is +# given multiple times, all of the files from the first instance will be +# processed before the next instance. See the man page for examples. +#include_dir \ No newline at end of file diff --git a/Mosquitto/docker-compose.yaml b/Mosquitto/docker-compose.yaml new file mode 100644 index 0000000..0830540 --- /dev/null +++ b/Mosquitto/docker-compose.yaml @@ -0,0 +1,19 @@ +version: '3' +services: + mosquitto: + container_name: mosquitto + image: eclipse-mosquitto:latest + restart: always + deploy: + resources: + limits: + memory: 256M + ports: + - "1883:1883" + - "9001:9001" + volumes: + - /home/ubuntu/docker/mosquitto/config/mosquitto.conf:/mosquitto/config/mosquitto.conf + - /home/ubuntu/docker/mosquitto/data:/mosquitto/data + - /home/ubuntu/docker/mosquitto/log:/mosquitto/log + security_opt: + - no-new-privileges:true diff --git a/Mosquitto/mosquitto.conf b/Mosquitto/mosquitto.conf new file mode 100644 index 0000000..5641be0 --- /dev/null +++ b/Mosquitto/mosquitto.conf @@ -0,0 +1,8 @@ +allow_anonymous false +listener 1883 +listener 9001 +protocol websockets +persistence true +password_file /mosquitto/config/pwfile +persistence_file mosquitto.db +persistence_location /mosquitto/data/ \ No newline at end of file