Some configuration in a container depends on whether it has support for
IPv6 (including default entries for '::1' etc in '/etc/hosts').
Before this change, the container's support for IPv6 was determined by
whether it was connected to any IPv6-enabled networks. But, that can
change over time, it isn't a property of the container itself.
So, instead, detect IPv6 support by looking for '::1' on the container's
loopback interface. It will not be present if the kernel does not have
IPv6 support, or the user has disabled it in new namespaces by other
means.
Once IPv6 support has been determined for the container, its '/etc/hosts'
is re-generated accordingly.
The daemon no longer disables IPv6 on all interfaces during initialisation.
It now disables IPv6 only for interfaces that have not been assigned an
IPv6 address. (But, even if IPv6 is disabled for the container using the
sysctl 'net.ipv6.conf.all.disable_ipv6=1', interfaces connected to IPv6
networks still get IPv6 addresses that appear in the internal DNS. There's
more to-do!)
Signed-off-by: Rob Murray <rob.murray@docker.com>
`VolumeOptions` now has a `Subpath` field which allows to specify a path
relative to the volume that should be mounted as a destination.
Symlinks are supported, but they cannot escape the base volume
directory.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Update the TestDaemonRestartKilContainers integration test to assert
that a container's healthcheck status is always reset to the Starting
state after a daemon restart, even when the container is live-restored.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Adds test ensuring that additional groups set with `--group-add`
are kept on exec when container had `--user` set on run.
Regression test for https://github.com/moby/moby/issues/46712
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The API endpoint `/containers/create` accepts several EndpointsConfig
since v1.22 but the daemon would error out in such case. This check is
moved from the daemon to the api and is now applied only for API < 1.44,
effectively allowing the daemon to create containers connected to
several networks.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The daemon would pass an EndpointCreateOption to set the interface MAC
address if the network name and the provided network mode were matching.
Obviously, if the network mode is a network ID, it won't work. To make
things worse, the network mode is never normalized if it's a partial ID.
To fix that: 1. the condition under what the container's mac-address is
applied is updated to also match the full ID; 2. the network mode is
normalized to a full ID when it's only a partial one.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Also move the validation function to live with the type definition,
which allows it to be used outside of the daemon as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility was only used for a single test, and it was very limited
in functionality as it only allowed for a certain error-string to be
matched.
Let's change it into a more generic function; a helper that allows a
container to be created from a `TestContainerConfig` (which can be
constructed using `NewTestConfig`) and that returns the response from
client.ContainerCreate(), so that any result from that can be tested,
leaving it up to the test to check the results.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Introduce a NewTestConfig utility, to allow using the available utilities
for constructing a config, and use them with the regular API client.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `client` variable was colliding with the `client` import. In some cases
the confusing `cli` name (it's not the "cli") was used. Given that such names
can easily start spreading (through copy/paste, or "code by example"), let's
make a one-time pass through all of them in this package to use the same name.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The original code in container.Exec was potentially leaking the copy
goroutine when the context was cancelled or timed out. The new
`demultiplexStreams()` function won't return until the goroutine has
finished its work, and to ensure that it takes care of closing the
hijacked connection.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
`docker run -v /foo:/foo:ro` is now recursively read-only on kernel >= 5.12.
Automatically falls back to the legacy non-recursively read-only mount mode on kernel < 5.12.
Use `ro-non-recursive` to disable RRO.
Use `ro-force-recursive` or `rro` to explicitly enable RRO. (Fails on kernel < 5.12)
Fix issue 44978
Fix docker/for-linux issue 788
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
These changes add basic CDI integration to the docker daemon.
A cdi driver is added to handle cdi device requests. This
is gated by an experimental feature flag and is only supported on linux
This change also adds a CDISpecDirs (cdi-spec-dirs) option to the config.
This allows the default values of `/etc/cdi`, /var/run/cdi` to be overridden
which is useful for testing.
Signed-off-by: Evan Lezar <elezar@nvidia.com>
- use is.ErrorType
- replace uses of client.IsErrNotFound for errdefs.IsNotFound, as
the client no longer returns the old error-type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Volumes created from the image config were not being pruned because the
volume service did not think they were anonymous since the code to
create passes along a generated name instead of letting the volume
service generate it.
This changes the code path to have the volume service generate the name
instead of doing it ahead of time.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Contrary to popular belief, the OCI Runtime specification does not
specify the command-line API for runtimes. Looking at containerd's
architecture from the lens of the OCI Runtime spec, the _shim_ is the
OCI Runtime and runC is "just" an implementation detail of the
io.containerd.runc.v2 runtime. When one configures a non-default runtime
in Docker, what they're really doing is instructing Docker to create
containers using the io.containerd.runc.v2 runtime with a configuration
option telling the runtime that the runC binary is at some non-default
path. Consequently, only OCI runtimes which are compatible with the
io.containerd.runc.v2 shim, such as crun, can be used in this manner.
Other OCI runtimes, including kata-containers v2, come with their own
containerd shim and are not compatible with io.containerd.runc.v2.
As Docker has not historically provided a way to select a non-default
runtime which requires its own shim, runtimes such as kata-containers v2
could not be used with Docker.
Allow other containerd shims to be used with Docker; no daemon
configuration required. If the daemon is instructed to create a
container with a runtime name which does not match any of the configured
or stock runtimes, it passes the name along to containerd verbatim. A
user can start a container with the kata-containers runtime, for
example, simply by calling
docker run --runtime io.containerd.kata.v2
Runtime names which containerd would interpret as a path to an arbitrary
binary are disallowed. While handy for development and testing it is not
strictly necessary and would allow anyone with Engine API access to
trivially execute any binary on the host as root, so we have decided it
would be safest for our users if it was not allowed.
It is not yet possible to set an alternative containerd shim as the
default runtime; it can only be configured per-container.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now client have the possibility to set the console size of the executed
process immediately at the creation. This makes a difference for example
when executing commands that output some kind of text user interface
which is bounded by the console dimensions.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
On Linux the daemon was not respecting the HostConfig.ConsoleSize
property and relied on cli initializing the tty size after the container
was created. This caused a delay between container creation and
the tty actually being resized.
This is also a small change to the api description, because
HostConfig.ConsoleSize is no longer Windows-only.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Since this function is about to get more complicated, and change
behaviour, this establishes tests for the existing implementation.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This makes sure that things like `--tmpfs` mounts over an anonymous
volume don't create volumes uneccessarily.
One method only checks mountpoints, the other checks both mountpoints
and tmpfs... the usage of these should likely be consolidated.
Ideally, processing for `--tmpfs` mounts would get merged in with the
rest of the mount parsing. I opted not to do that for this change so the
fix is minimal and can potentially be backported with fewer changes of
breaking things.
Merging the mount processing for tmpfs can be handled in a followup.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Docker Desktop (on MAC and Windows hosts) allows containers
running inside a Linux VM to connect to the host using
the host.docker.internal DNS name, which is implemented by
VPNkit (DNS proxy on the host)
This PR allows containers to connect to Linux hosts
by appending a special string "host-gateway" to --add-host
e.g. "--add-host=host.docker.internal:host-gateway" which adds
host.docker.internal DNS entry in /etc/hosts and maps it to host-gateway-ip
This PR also add a daemon flag call host-gateway-ip which defaults to
the default bridge IP
Docker Desktop will need to set this field to the Host Proxy IP
so DNS requests for host.docker.internal can be routed to VPNkit
Addresses: https://github.com/docker/for-linux/issues/264
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
```
Line 25: warning: context.Context should be the first parameter of a function (golint)
Line 44: warning: context.Context should be the first parameter of a function (golint)
Line 52: warning: context.Context should be the first parameter of a function (golint)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds both a daemon-wide flag and a container creation property:
- Set the `CgroupnsMode: "host|private"` HostConfig property at
container creation time to control what cgroup namespace the container
is created in
- Set the `--default-cgroupns-mode=host|private` daemon flag to control
what cgroup namespace containers are created in by default
- Set the default if the daemon flag is unset to "host", for backward
compatibility
- Default to CgroupnsMode: "host" for client versions < 1.40
Signed-off-by: Rob Gulewich <rgulewich@netflix.com>
