The github.com/containerd/containerd/log package was moved to a separate
module, which will also be used by upcoming (patch) releases of containerd.
This patch moves our own uses of the package to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some packages were using `logrus.Fatal()` in init functions (which logs the error,
and (by default) calls `os.Exit(1)` after logging).
Given that logrus formatting and outputs have not yet been configured during the
initialization stage, it does not provide much benefits over a plain `panic()`.
This patch replaces some instances of `logrus.Fatal()` with `panic()`, which has
the added benefits of not introducing logrus as a dependency in some of these
packages, and also produces a stacktrace, which could help locating the problem
in the unlikely event an `init()` fails.
Before this change, an error would look like:
$ dockerd
FATA[0000] something bad happened
After this change, the same error looks like:
$ dockerd
panic: something bad happened
goroutine 1 [running]:
github.com/docker/docker/daemon/logger/awslogs.init.0()
/go/src/github.com/docker/docker/daemon/logger/awslogs/cloudwatchlogs.go:128 +0x89
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
pkg/urlutil (despite its poorly chosen name) is not really intended as a generic
utility to handle URLs, and should only be used by the builder to handle (remote)
build contexts.
This patch:
- fix some cases where the host was ignored for valid addresses.
- removes a redundant use of urlutil.IsTransportURL(); instead adding code to
check if the given scheme (protocol) is supported.
- improve port validation for out of range ports.
- fix some missing validation: the driver was silently ignoring path elements,
but expected a host (not an URL)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
fix some missing validation: the driver was silently ignoring path elements
in some cases, and expecting a host (not an URL), and for unix sockets did
not validate if a path was specified.
For the latter case, we should have a fix in the upstream driver, as it
uses an empty path as default path for the socket (`defaultSocketPath`),
and performs no validation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* When async is enabled, this option defines the interval (ms) at which the connection
to the fluentd-address is re-established. This option is useful if the address
may resolve to one or more IP addresses, e.g. a Consul service address.
While the change in #42979 resolves the issue where a Docker container can be stuck
if the fluentd-address is unavailable, this functionality adds an additional benefit
in that a new and healthy fluentd-address can be resolved, allowing logs to flow once again.
This adds a `fluentd-async-reconnect-interval` log-opt for the fluentd logging driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Conor Evans <coevans@tcd.ie>
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Co-authored-by: Conor Evans <coevans@tcd.ie>
The flag ForceStopAsyncSend was added to fluent logger lib in v1.5.0 (at
this time named AsyncStop) to tell fluentd to abort sending logs
asynchronously as soon as possible, when its Close() method is called.
However this flag was broken because of the way the lib was handling it
(basically, the lib could be stucked in retry-connect loop without
checking this flag).
Since fluent logger lib v1.7.0, calling Close() (when ForceStopAsyncSend
is true) will really stop all ongoing send/connect procedure,
wherever it's stucked.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This adds a new `fluentd-request-ack` logging option for the Fluentd
logging driver. If enabled, the server will respond with an acknowledgement.
This option improves the reliability of the message transmission. This
change is not versioned, and affects all API versions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This extracts parsing the driver's configuration to a
function, and uses the same function both when initializing
the driver, and when validating logging options.
Doing so allows validating if the provided options are in
the correct format when calling `ValidateOpts`, instead
of resulting in an error when initializing the logging driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Partial property of the Logger message
was replaced by PLogMetaData, causing the build to fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reduces allocs and bytes used per log entry significantly as well
as some improvement to time per log operation.
Each log driver, however, must put messages back in the pool once they
are finished with the message.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in #22358 where syslog's
message tag always starts with `docker/` and can not be removed
by changing the log tag templates.
The issue is that syslog driver hardcodes `path.Base(os.Args[0])`
as the prefix, which is the binary file name of the daemon (`dockerd`).
This could be an issue for certain situations (e.g., #22358) where
user may prefer not to have a dedicated prefix in syslog messages.
There is no way to override this behavior in the current verison of
the docker.
This fix tries to address this issue without making changes in the
default behavior of the syslog driver. An additional
`{{.DaemonName}}` has been introduced in the syslog tag. This is
assigned as the `docker` when daemon starts. The default log tag
template has also been changed from
`path.Base(os.Args[0]) + "/{{.ID}}"` to `{{.DaemonName}}/{{.ID}}`.
Therefore, there is no behavior changes when log-tag is not provided.
In order to be consistent, the default log tag for fluentd has been
changed from `docker.{{.ID}}` to `{{DaemonName}}.{{.ID}}` as well.
The documentation for log-tag has been updated to reflect this change.
Additional test cases have been added to cover changes in this fix.
This fix fixes#22358.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Since 1.9, driver specific log tag options
`syslog-tag`
`gelf-tag`
`fluentd-tag`
have been deprecated in favor of the generic tag
option which is standard across different logging
drivers.
This fix removed the deprecated driver specific
log tag options of `syslog-tag`, `gelf-tag`,
`fluentd-tag` for 1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Signed-off-by: Jussi Nummelin <jussi.nummelin@gmail.com>
Changed buffer size to 1M and removed unnecessary fmt call
Signed-off-by: Jussi Nummelin <jussi.nummelin@gmail.com>
Updated docs for the new fluentd opts
Signed-off-by: Jussi Nummelin <jussi.nummelin@gmail.com>
this allows fluentd logger to collect extra metadata from containers with
`--log-opt labels=label1,label2 --log-opt env=env1,env2`
Signed-off-by: Daniel Dao <dqminh@cloudflare.com>
If an invalid logger address is provided on daemon start it will
silently fail. As syslog driver is doing, this check should be done on
daemon start and prevent it from starting even in other drivers.
This patch also adds integration tests for this behavior.
Signed-off-by: Antonio Murdaca <runcom@linux.com>
- downcase and privatize exported variables that were unused
- make accurate an error message
- added package comments
- remove unused var ReadLogsNotSupported
- enable linter
- some spelling corrections
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
