Remove the "deadcode", "structcheck", and "varcheck" linters, as they are
deprecated:
WARN [runner] The linter 'deadcode' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'structcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'varcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [linters context] structcheck is disabled because of generics. You can track the evolution of the generics support by following the https://github.com/golangci/golangci-lint/issues/2649.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2f1c382a6d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Finish the refactor which was partially completed with commit
34536c498d, passing around IdentityMapping structs instead of pairs of
[]IDMap slices.
Existing code which uses []IDMap relies on zero-valued fields to be
valid, empty mappings. So in order to successfully finish the
refactoring without introducing bugs, their replacement therefore also
needs to have a useful zero value which represents an empty mapping.
Change IdentityMapping to be a pass-by-value type so that there are no
nil pointers to worry about.
The functionality provided by the deprecated NewIDMappingsFromMaps
function is required by unit tests to to construct arbitrary
IdentityMapping values. And the daemon will always need to access the
mappings to pass them to the Linux kernel. Accommodate these use cases
by exporting the struct fields instead. BuildKit currently depends on
the UIDs and GIDs methods so we cannot get rid of them yet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
pkg/system historically has been a bit of a kitchen-sink of things that were
somewhat "system" related, but didn't have a good place for. EnsureRemoveAll()
is one of those utilities. EnsureRemoveAll() is used to both unmount and remove
a path, for which it depends on both github.com/moby/sys/mount, which in turn
depends on github.com/moby/sys/mountinfo.
pkg/system is imported in the CLI, but neither EnsureRemoveAll(), nor any of its
moby/sys dependencies are used on the client side, so let's move this function
somewhere else, to remove those dependencies from the CLI.
I looked for plausible locations that were related; it's used in:
- daemon
- daemon/graphdriver/XXX/
- plugin
I considered moving it into a (e.g.) "utils" package within graphdriver (but not
a huge fan of "utils" packages), and given that it felt (mostly) related to
cleaning up container filesystems, I decided to move it there.
Some things to follow-up on after this:
- Verify if this function is still needed (it feels a bit like a big hammer in
a "YOLO, let's try some things just in case it fails")
- Perhaps it should be integrated in `containerfs.Remove()` (so that it's used
automatically)
- Look if there's other implementations (and if they should be consolidated),
although (e.g.) the one in containerd is a copy of ours:
https://github.com/containerd/containerd/blob/v1.5.9/pkg/cri/server/helpers_linux.go#L200
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Do not use 0701 perms.
0701 dir perms allows anyone to traverse the docker dir.
It happens to allow any user to execute, as an example, suid binaries
from image rootfs dirs because it allows traversal AND critically
container users need to be able to do execute things.
0701 on lower directories also happens to allow any user to modify
things in, for instance, the overlay upper dir which neccessarily
has 0755 permissions.
This changes to use 0710 which allows users in the group to traverse.
In userns mode the UID owner is (real) root and the GID is the remapped
root's GID.
This prevents anyone but the remapped root to traverse our directories
(which is required for userns with runc).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit ef7237442147441a7cadcda0600be1186d81ac73)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 93ac040bf0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Various dirs in /var/lib/docker contain data that needs to be mounted
into a container. For this reason, these dirs are set to be owned by the
remapped root user, otherwise there can be permissions issues.
However, this uneccessarily exposes these dirs to an unprivileged user
on the host.
Instead, set the ownership of these dirs to the real root (or rather the
UID/GID of dockerd) with 0701 permissions, which allows the remapped
root to enter the directories but not read/write to them.
The remapped root needs to enter these dirs so the container's rootfs
can be configured... e.g. to mount /etc/resolve.conf.
This prevents an unprivileged user from having read/write access to
these dirs on the host.
The flip side of this is now any user can enter these directories.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit e908cc3901)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This implements chown support on Windows. Built-in accounts as well
as accounts included in the SAM database of the container are supported.
NOTE: IDPair is now named Identity and IDMappings is now named
IdentityMapping.
The following are valid examples:
ADD --chown=Guest . <some directory>
COPY --chown=Administrator . <some directory>
COPY --chown=Guests . <some directory>
COPY --chown=ContainerUser . <some directory>
On Windows an owner is only granted the permission to read the security
descriptor and read/write the discretionary access control list. This
fix also grants read/write and execute permissions to the owner.
Signed-off-by: Salahuddin Khan <salah@docker.com>
This is a fix to regression in vfs graph driver introduced by
commit 7a1618ced3 ("add quota support to VFS graphdriver").
On some filesystems, vfs fails to init with the following error:
> Error starting daemon: error initializing graphdriver: Failed to mknod
> /go/src/github.com/docker/docker/bundles/test-integration/d6bcf6de610e9/root/vfs/backingFsBlockDev:
> function not implemented
As quota is not essential for vfs, let's ignore (but log as a warning) any error
from quota init.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Files that are suffixed with `_linux.go` or `_windows.go` are
already only built on Linux / Windows, so these build-tags
were redundant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change makes the VFS graphdriver use the kernel-accelerated
(copy_file_range) mechanism of copying files, which is able to
leverage reflinks.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
This patch adds the capability for the VFS graphdriver to use
XFS project quotas. It reuses the existing quota management
code that was created by overlay2 on XFS.
It doesn't rely on a filesystem whitelist, but instead
the quota-capability detection code.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
This enables docker cp and ADD/COPY docker build support for LCOW.
Originally, the graphdriver.Get() interface returned a local path
to the container root filesystem. This does not work for LCOW, so
the Get() method now returns an interface that LCOW implements to
support copying to and from the container.
Signed-off-by: Akash Gupta <akagup@microsoft.com>
There is no case which would resolve in this error. The root user always exists, and if the id maps are empty, the default value of 0 is correct.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The test was failing because TarOptions was using a non-pointer for
ChownOpts, which meant the check for nil was never true, and
createTarFile was never using the hdr.UID/GID
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Before this, if `forceRemove` is set the container data will be removed
no matter what, including if there are issues with removing container
on-disk state (rw layer, container root).
In practice this causes a lot of issues with leaked data sitting on
disk that users are not able to clean up themselves.
This is particularly a problem while the `EBUSY` errors on remove are so
prevalent. So for now let's not keep this behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows for easy extension of adding more parameters to existing
parameters list. Otherwise adding a single parameter changes code
at so many places.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Since the layer store was introduced, the level above the graphdriver
now differentiates between read/write and read-only layers. This
distinction is useful for graphdrivers that need to take special steps
when creating a layer based on whether it is read-only or not.
Adding this parameter allows the graphdrivers to differentiate, which
in the case of the Windows graphdriver, removes our dependence on parsing
the id of the parent for "-init" in order to infer this information.
This will also set the stage for unblocking some of the layer store
unit tests in the next preview build of Windows.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This change will allow us to run SELinux in a container with
BTRFS back end. We continue to work on fixing the kernel/BTRFS
but this change will allow SELinux Security separation on BTRFS.
It basically relabels the content on container creation.
Just relabling -init directory in BTRFS use case. Everything looks like it
works. I don't believe tar/achive stores the SELinux labels, so we are good
as far as docker commit.
Tested Speed on startup with BTRFS on top of loopback directory. BTRFS
not on loopback should get even better perfomance on startup time. The
more inodes inside of the container image will increase the relabel time.
This patch will give people who care more about security the option of
runnin BTRFS with SELinux. Those who don't want to take the slow down
can disable SELinux either in individual containers or for all containers
by continuing to disable SELinux in the daemon.
Without relabel:
> time docker run --security-opt label:disable fedora echo test
test
real 0m0.918s
user 0m0.009s
sys 0m0.026s
With Relabel
test
real 0m1.942s
user 0m0.007s
sys 0m0.030s
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Adds support for the daemon to handle user namespace maps as a
per-daemon setting.
Support for handling uid/gid mapping is added to the builder,
archive/unarchive packages and functions, all graphdrivers (except
Windows), and the test suite is updated to handle user namespace daemon
rootgraph changes.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Replaced github.com/docker/libcontainer with
github.com/opencontainers/runc/libcontaier.
Also I moved AppArmor profile generation to docker.
Main idea of this update is to fix mounting cgroups inside containers.
After updating docker on CI we can even remove dind.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Export image/container metadata stored in graph driver. Right now 3 fields
DeviceId, DeviceSize and DeviceName are being exported from devicemapper.
Other graph drivers can export fields as they see fit.
This data can be used to mount the thin device outside of docker and tools
can look into image/container and do some kind of inspection.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
daemon/volumes.go
This SetFileCon call made no sense, it was changing the labels of any
directory mounted into the containers SELinux label. If it came from me,
then I apologize since it is a huge bug.
The Volumes Mount code should optionally do this, but it should not always
happen, and should never happen on a --privileged container.
The change to
daemon/graphdriver/vfs/driver.go, is a simplification since this it not
a relabel, it is only a setting of the shared label for docker volumes.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
There are a couple of drivers that swallow errors that may occur in
their Put() implementation.
This changes the signature of (*Driver).Put for all the drivers implemented.
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
The vfs storage driver currently shells out to the `cp` binary on the host
system to perform an 'archive' copy of the base image to a new directory.
The archive option preserves the modified time of the files which are created
but there was an issue where it was unable to preserve the modified time of
copied symbolic links on some host systems with an outdated version of `cp`.
This change no longer relies on the host system implementation and instead
utilizes the `CopyWithTar` function found in `pkg/archive` which is used
to copy from source to destination directory using a Tar archive, which
should correctly preserve file attributes.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Some graphdrivers are Differs and type assertions are made
in various places throughout the project. Differ offers some
convenience in generating/applying diffs of filesystem layers
but for most graphdrivers another code path is taken.
This patch brings all of the logic related to filesystem
diffs in one place, and simplifies the implementation of some
common types like Image, Daemon, and Container.
Signed-off-by: Josh Hawn <josh.hawn@docker.com>
Since these will be shared between containers we want to label
them as svirt_sandbox_file_t:s0. That will allow multiple containers
to write to them.
Currently we are allowing container domains to read/write all content in
/var/lib/docker because of container volumes. This is a big security hole
in our SELinux story.
This patch will allow us to tighten up the security of docker containers.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
