This patch consolidates the two WaitStop and WaitWithContext methods
on the container.State type. Now there is a single method, Wait, which
takes a context and a bool specifying whether to wait for not just a
container exit but also removal.
The behavior has been changed slightly so that a wait call during a
Created state will not return immediately but instead wait for the
container to be started and then exited.
The interface has been changed to no longer block, but instead returns
a channel on which the caller can receive a *StateStatus value which
indicates the ExitCode or an error if there was one (like a context
timeout or state transition error).
These changes have been propagated through the rest of the deamon to
preserve all other existing behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Before this, if `forceRemove` is set the container data will be removed
no matter what, including if there are issues with removing container
on-disk state (rw layer, container root).
In practice this causes a lot of issues with leaked data sitting on
disk that users are not able to clean up themselves.
This is particularly a problem while the `EBUSY` errors on remove are so
prevalent. So for now let's not keep this behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Container state counts are used for reporting in the `/info` endpoint.
Currently when `/info` is called, each container is iterated over and
the containers 'StateString()' is called. This is not very efficient
with lots of containers, and is also racey since `StateString()` is not
using a mutex and the mutex is not otherwise locked.
We could just lock the container mutex, but this is proven to be
problematic since there are frequent deadlock scenarios and we should
always have the `/info` endpoint available since this endpoint is used
to get general information about the docker host.
Really, these metrics on `/info` should be deprecated. But until then,
we can just keep a running tally in memory for each of the reported
states.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Running the rm command on a paused/restarting container
will give an error message saying the container is running
which is incorrect.
To fix that, the error message will have the correct
container state and a procedure to remove it accordingly.
Notice: docker-py was bumped to:
4a08d04aef0595322e1b5ac7c52f28a931da85a5
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
When using `docker volume rm -f`, all errors were ignored,
and volumes where Purged, even if they were still in
use by a container.
As a result, repeated calls to `docker volume rm -f`
actually removed the volume.
The `-f` option was implemented to ignore errors
in case a volume was already removed out-of-band
by a volume driver plugin.
This patch changes the remove function to not
ignore "volume in use" errors if `-f` is used.
Other errors are still ignored as before.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds a metrics packages that creates additional metrics. Add the
metrics endpoint to the docker api server under `/metrics`.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add metrics to daemon package
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
api: use standard way for metrics route
Also add "type" query parameter
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Convert timers to ms
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This fix tries to address the issue in raised #23367 where an out-of-band
volume driver deletion leaves some data in docker. This prevent the
reuse of deleted volume names (by out-of-band volume driver like flocker).
This fix adds a `--force` field in `docker volume rm` to forcefully purge
the data of the volume that has already been deleted.
Related documentations have been updated.
This fix is tested manually with flocker, as is specified in #23367.
An integration test has also been added for the scenario described.
This fix fixes#23367.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
fixes#25766
If a container's AutoRemove is enabled, client will wait until it's
removed after container exits, this is implemented based on "destroy"
event.
Currently an "AutoRemove" container will report "destroy" event to
notify a hanging client to exit before all volumes are removed, this is
wrong, we should wait container until everything is cleaned up.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
Currently some commands including `kill`, `pause`, `restart`, `rm`,
`rmi`, `stop`, `unpause`, `udpate`, `wait` will print a lot of error
message on client side, with a lot of redundant messages, this commit is
trying to remove the unuseful and redundant information for user.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Don't rely on sqlite db for name registration and linking.
Instead register names and links when the daemon starts to an in-memory
store.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Makes `docker volume ls` and `docker volume inspect` ask the volume
drivers rather than only using what is cached locally.
Previously in order to use a volume from an external driver, one would
either have to use `docker volume create` or have a container that is
already using that volume for it to be visible to the other volume
API's.
For keeping uniqueness of volume names in the daemon, names are bound to
a driver on a first come first serve basis. If two drivers have a volume
with the same name, the first one is chosen, and a warning is logged
about the second one.
Adds 2 new methods to the plugin API, `List` and `Get`.
If a plugin does not implement these endpoints, a user will not be able
to find the specified volumes as well requests go through the drivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Support restoreCustomImage for windows with a new interface to extract
the graph driver from the LayerStore.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
RWLayer will now have more operations and be protected through a referenced type rather than always looked up by string in the layer store.
Separates creation of RWLayer (write capture layer) from mounting of the layer.
This allows mount labels to be applied after creation and allowing RWLayer objects to have the same lifespan as a container without performance regressions from requiring mount.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
- avoid empty Names in container list API when fails to remove
a container
- avoid dead containers when fails to create a container
Signed-off-by: Shijiang Wei <mountkin@gmail.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Although having a request ID available throughout the codebase is very
valuable, the impact of requiring a Context as an argument to every
function in the codepath of an API request, is too significant and was
not properly understood at the time of the review.
Furthermore, mixing API-layer code with non-API-layer code makes the
latter usable only by API-layer code (one that has a notion of Context).
This reverts commit de41640435, reversing
changes made to 7daeecd42d.
Signed-off-by: Tibor Vass <tibor@docker.com>
Conflicts:
api/server/container.go
builder/internals.go
daemon/container_unix.go
daemon/create.go
This PR adds a "request ID" to each event generated, the 'docker events'
stream now looks like this:
```
2015-09-10T15:02:50.000000000-07:00 [reqid: c01e3534ddca] de7c5d4ca927253cf4e978ee9c4545161e406e9b5a14617efb52c658b249174a: (from ubuntu) create
```
Note the `[reqID: c01e3534ddca]` part, that's new.
Each HTTP request will generate its own unique ID. So, if you do a
`docker build` you'll see a series of events all with the same reqID.
This allow for log processing tools to determine which events are all related
to the same http request.
I didn't propigate the context to all possible funcs in the daemon,
I decided to just do the ones that needed it in order to get the reqID
into the events. I'd like to have people review this direction first, and
if we're ok with it then I'll make sure we're consistent about when
we pass around the context - IOW, make sure that all funcs at the same level
have a context passed in even if they don't call the log funcs - this will
ensure we're consistent w/o passing it around for all calls unnecessarily.
ping @icecrime @calavera @crosbymichael
Signed-off-by: Doug Davis <dug@us.ibm.com>
- Add unit tests to make sure the functionality is correct.
- Add FilterByDriver to allow filtering volumes by driver, for future
`volume ls` filtering and whatnot.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Volumes are accounted when a container is created.
If the creation fails we should remove the reference from the counter.
Do not log ErrVolumeInUse as an error, having other volume references is
not an error.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Underlying volume data may have been removed by some other tool.
Ignore and remove the reference in this case.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
- some method names were changed to have a 'Locking' suffix, as the
downcased versions already existed, and the existing functions simply
had locks around the already downcased version.
- deleting unused functions
- package comment
- magic numbers replaced by golang constants
- comments all over
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Windows: add support for images stored in alternate location.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
