Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
(cherry picked from commit 0aa4e1e689)
These links were temporarily changed, because the
docs were published before the 1.12.0 tag was
available.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit cd69b94241)
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
this brings back the trailing whitespace in "runmetrics",
that were there intentially to force a line-break
also removes a duplicate redirect, that was present
on two pages
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d8434eba46)
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
The archive is only available on docs.docker.com, and not
when doing a "make docs", so relative links will not resolve.
Making these links absolute, so that they always
point to the live "docs.docker.com" domain.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 4b090ae5f2)
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Swarm mode makes it possible through the API to set labels to containers
but not through command line. This tries to fix it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 4031d70d1b)
Signed-off-by: Tibor Vass <tibor@docker.com>
Instead reserve exit code 2 to be future proof, document that it should
not be used. Implementation-wise, it is considered as unhealthy, but
users should not rely on this as it may change in the future.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit 91e9f38313)
Signed-off-by: Tibor Vass <tibor@docker.com>
This adds a guide with recommendations on how to setup
Managers and keep the Swarm cluster healthy.
Signed-off-by: Alexandre Beslic <alexandre.beslic@gmail.com>
(cherry picked from commit 24f87f26e7)
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 57ae29aa74)
Signed-off-by: Tibor Vass <tibor@docker.com>
Commit cc493a52a4 added
a constraint to network connect/disconnect operations
on "Swarm scoped" networks.
This adds those errors to the API documentation. Also
changes the error to lowercase for consistency.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit b0089e4827)
Signed-off-by: Tibor Vass <tibor@docker.com>
These docs have AuthzPlugin with a lower case 'z'. What the plugin
api is actually looking for is AuthZPlugin with an upper case 'Z'.
See 46e3a249a1/pkg/authorization/api.go (L5-L8)
Signed-off-by: Everett Toews <everett.toews@rackspace.com>
(cherry picked from commit c42fbc6b09)
Signed-off-by: Tibor Vass <tibor@docker.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit fca0b18dcb)
Signed-off-by: Tibor Vass <tibor@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit a0ccd0d42f)
Signed-off-by: Tibor Vass <tibor@docker.com>
This renames the `rotate_xxx` flags to camelBack, for
consistency with other API query-params, such as
`detachKeys`, `noOverwriteDirNonDir`, and `fromImage`.
Also makes this flag accept a wider range of boolean
values ("0", "1", "true", "false"), and throw an error
if an invalid value is passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit bd81df1278)
Signed-off-by: Tibor Vass <tibor@docker.com>
Update documentation to account for the changes in #24952.
docs/swarm/swarm-tutorial/rolling-update.md doesn't need any changes,
but the CLI reference pages should show the current help text.
drain-node.md no longer needs to specify --update-parallelism 1 in its
example.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 933ba8d7f7)
Signed-off-by: Tibor Vass <tibor@docker.com>
f5e1f6f688 replaced "secrets"
with "join tokens", which also removed the "auto-accept"
policy.
This removes some remaining references to those features.
Note that there are other references, but those
are already addressed in another pull request.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 987511712f)
Signed-off-by: Tibor Vass <tibor@docker.com>
`--with-registry-auth` is more explicit.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
(cherry picked from commit 8426f72107)
Signed-off-by: Tibor Vass <tibor@docker.com>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 2cc5bd33ee)
Signed-off-by: Tibor Vass <tibor@docker.com>
these values were changed to lowercase in
690cb2d08c,
but not changed accordingly in docker/docker.
this changes the mounttypes to lowercase
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 8f93128cd6)
Signed-off-by: Tibor Vass <tibor@docker.com>
At the moment docker's deprecation policy is 2 release cycles by
default, which is around 5 months. This may not be enough for
production environment and there is a need to extend the
deprecation cycle to 3 releases (see #24494).
This fix updates the docs/deprecated.md and extend the deprecation
cycle to 3 releases.
This fix is related to #24494 and #24534.
This fix fixes#24534.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 9414955c60)
Signed-off-by: Tibor Vass <tibor@docker.com>
this improves the formatting, and code-highlighting
of the `docker ps` reference page, and wraps sentences
to 80 chars
also adds single quotes around the formatting
example for labels.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 07ef0a37f8)
Signed-off-by: Tibor Vass <tibor@docker.com>
Looks like I copied from the line below, not
from the output :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 83b12c0c11)
Signed-off-by: Tibor Vass <tibor@docker.com>
Adds documentation for "--log-driver" and "--log-opt"
for services.
Also updated the API docs to include the new
options, and generated a more complete JSON
example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 5ece2a6e0d)
Signed-off-by: Tibor Vass <tibor@docker.com>
the output/response slightly changed in
340964db1c,
and `:latest` is no longer required for
various actions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 9d532b5e2d)
Signed-off-by: Tibor Vass <tibor@docker.com>
This renames the '--bundle' flag for docker (stack) deploy
to be consistent with 'docker build'.
Note that there's no shorthand '-f' added for now,
because this may be confusing on 'docker stack config',
which also takes a file, and for which we may want to
have a '--format' flag in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 06f35262c4)
Signed-off-by: Tibor Vass <tibor@docker.com>
