to make goreportcard a bit happier
https://goreportcard.com/report/github.com/docker/docker
also found that `TestCpToErrDstParentNotExists()` was
partially broken, because a `runDockerCp()` was inadvertently
removed in f26a31e80c
`TestDaemonRestartSaveContainerExitCode()` didn't verify
the actual _Error_ message, so added that to the test,
and updated the test to take into account that the
"experimental" CI enables `--init` on containers.
`TestVolumeCLICreateOptionConflict()` only checked
for an error to occur, but didn't validate if the
error was due to conflicting options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Join a few tests in one when it makes sense (reduce the number of
container run and thus the overall time of the suites)
- Remove some duplication on several tests
- Remove some unused methods
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Because "tty" is closed in s.d.Stop() for "--raw-logs=false" test,
we need to open another pair of pty before test "--raw-logs=true"
option.
This patch fix#29772.
Signed-off-by: Jiuyue Ma <majiuyue@huawei.com>
Call daemon.Mount will increase the refcount of mounted path,
for those previous running containers, `Mount` call will make
the refcount to 2. see
https://github.com/docker/docker/blob/v1.13.0-rc4/daemon/graphdriver/counter.go#L38
```
if !m.check {
m.check = true
if c.checker.IsMounted(path) {
m.count++
}
}
m.count++
```
graphdrive could restore on reboot after #22541, call
daemon.Mount to resore the graphdriver is not necessary.
And call `daemon.Mount` on restorting will mount all the containers
mounted layer even if it was stop.
This fix call Mount and then Unmount to get `BaseFs`
Signed-off-by: Lei Jitang <leijitang@huawei.com>
- Move *one-shot* (one use) function where it is actually used (easier
to know what's going on).
- Remove `pullImageIfNotExist` function as it might be an artifact
from way back. We don't need it as we already have frozen/loaded
image of busybox.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The `docker logs` command performed a
client-side check if the container's
logging driver was supported.
Now that we allow the client to connect
to both "older" and "newer" daemon versions,
this check is best done daemon-side.
This patch remove the check on the client
side, and leaves validation to the daemon,
which should be the source of truth.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Ensures all known volumes (known b/c they are persisted to disk) have
their volume drivers refcounted properly.
In testing this, I found an issue with `--live-restore` (required since
currently the provided volume plugin doesn't keep state on restart)
where restorted plugins did not have a plugin client loaded causing a
panic when trying to use the plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 29342 where
`docker exec -u` after docker daemon restart returns an error:
```
unable to find user test: no matching entries in passwd file
```
The reason was that `container.BaseFS` is not present after restart.
This fix adds the `daemon.Mount` during the restore to bring up the
`container.BaseFS`.
An integration test has been added to cover the changes.
This fix fixes 29342.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
… to make sure it doesn't fail. It also introduce StartWithError,
StopWithError and RestartWithError in case we care about the
error (and want the error to happen).
This removes the need to check for error and make the intent more
clear : I want a deamon with busybox loaded on it — if an error occur
it should fail the test, but it's not the test code that has the
responsability to check that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to add a daemon config parameter `--shutdown-timeout`
that specifies the timeout value to stop containers gracefully
(before SIGKILL). The default value is 15s.
The `--shutdown-timeout` parameter is added to daemon options and
config file. It will also be updated during daemon reload.
Additional test cases have been added to cover the change.
This fix fixes#22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
No substantial code change.
- Api --> API
- Cli --> CLI
- Http, Https --> HTTP, HTTPS
- Id --> ID
- Uid,Gid,Pid --> UID,PID,PID
- Ipam --> IPAM
- Tls --> TLS (TestDaemonNoTlsCliTlsVerifyWithEnv --> TestDaemonTLSVerifyIssue13964)
Didn't touch in this commit:
- Git: because it is officially "Git": https://git-scm.com/
- Tar: because it is officially "Tar": https://www.gnu.org/software/tar/
- Cpu, Nat, Mac, Ipc, Shm: for keeping a consistency with existing production code (not changable, for compatibility)
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Instead of reformatting error from the request action, we wrap it,
allowing the cause to be recovered. This is important for consumers that
need to be able to detect context errors, such as `Cancelled` and
`DeadlineExceeded`.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This was removed in a clean-up
(060f4ae617) but should not have been.
Fixes issues with volumes when upgrading from pre-1.7.0 daemons.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix is a follow-up of 26154. I did a grep on `integration-cli` and
found out that there are several tests in `docker_cli_daemon_test.go`
that still use `NewDaemon` instread of `DockerDaemonSuite`.
This fix changes related tests from DockerSuite to DockerDaemonSuite in
`docker_cli_daemon_test.go`.
With this fix, now `NewDaemon` is only called from `SetUpTest` on
various DockerXXXSuite. That should help maintain the test code base.
This fix is related to the comments in:
26115
24533.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
`TestDaemonDiscoveryBackendConfigReload` was doing some wierd things
with files, creating a file (directly in `./integration-cli`), removing
it, then creating a new file.
This is just weird, so fixed it to use a single file, file will go into
a temp dir so it doesn't pollute integration-cli.
It was also blindly sending a SIGHUP to the daemon process then sleeping
for 3 seconds. This is racey, and slow.
Change this to look for the daemon-reload event in the event stream.
Reload logic is moved to a separate function and blocks (w/ a timeout)
waiting for the reload event to fire.
Runtime of the test is now ~0.5s on my machine, where as it was a
minimum of 3s due to the `time.Sleep` before.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Support args to RunCommand
Fix docker help text test.
Fix for ipv6 tests.
Fix TLSverify option.
Fix TestDaemonDiscoveryBackendConfigReload
Use tempfile for another test.
Restore missing flag.
Fix tests for removal of shlex.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Fix delete containers and make sure it prints errors correctly.
Rename Result.Fails to Result.Assert()
Create a constant for the default expected.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Remove some run functions and replace them with the unified run command.
Remove DockerCmdWithStdoutStderr
Remove many duplicate runCommand functions.
Also add dockerCmdWithResult()
Allow Result.Assert() to ignore the error message if an exit status is expected.
Fix race in DockerSuite.TestDockerInspectMultipleNetwork
Fix flaky test DockerSuite.TestRunInteractiveWithRestartPolicy
Signed-off-by: Daniel Nephin <dnephin@docker.com>
`--rm` is a client side flag which caused lots of problems:
1. if client lost connection to daemon, including client crash or be
killed, there's no way to clean garbage container.
2. if docker stop a `--rm` container, this container won't be
autoremoved.
3. if docker daemon restart, container is also left over.
4. bug: `docker run --rm busybox fakecmd` will exit without cleanup.
In a word, client side `--rm` flag isn't sufficient for garbage
collection. Move the `--rm` flag to daemon will be more reasonable.
What this commit do is:
1. implement a `--rm` on daemon side, adding one flag `AutoRemove` into
HostConfig.
2. Allow `run --rm -d`, no conflicting `--rm` and `-d` any more,
auto-remove can work on detach mode.
3. `docker restart` a `--rm` container will succeed, the container won't
be autoremoved.
This commit will help a lot for daemon to do garbage collection for
temporary containers.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fix two test issues:
- pidof is not available in PATH on some Jenkins systems (rhel, centos)
Use kill -0 instead.
- Cleanup after plugin test. This is a stop gap fix. The right way to
fix this, is to shutdown the plugin on daemon shutdown path (except
for the live-restore case). This will be done in a follow up PR.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
