Signed-off-by: Lewis Daly <lewisdaly@me.com>
Updated uid/gid reference to be more canonical - and signed commit
Signed-off-by: Lewis Daly <lewisdaly@me.com>
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
This persists the "propagated mount" for plugins outside the main
rootfs. This enables `docker plugin upgrade` to not remove potentially
important data during upgrade rather than forcing plugin authors to hard
code a host path to persist data to.
Also migrates old plugins that have a propagated mount which is in the
rootfs on daemon startup.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows a plugin to be upgraded without requiring to
uninstall/reinstall a plugin.
Since plugin resources (e.g. volumes) are tied to a plugin ID, this is
important to ensure resources aren't lost.
The plugin must be disabled while upgrading (errors out if enabled).
This does not add any convenience flags for automatically
disabling/re-enabling the plugin during before/after upgrade.
Since an upgrade may change requested permissions, the user is required
to accept permissions just like `docker plugin install`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Pulling all the endpoints is a very resource heavy operation especially
for Global-scoped networks with a backing KVStore. Such heavy operations
can be fetched for individual network inspect. These are unneccessary
for a simple network list operation.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Working directory processing was handled differently for Hyper-V and Windows-Server containers, as annotated in the builder documentation (updated in this PR). For Hyper-V containers, the working directory set by WORKDIR was not created. This PR makes Hyper-V containers work the same as Windows Server containers (and the same as Linux).
Example (only applies to Hyper-V containers, so not reproducible under CI environment)
Dockerfile:
FROM microsoft/nanoserver
WORKDIR c:\installer
ENV GOROOT=c:\installer
ADD go.exe .
RUN go --help
Running on Windows Server 2016, using docker master without this change, but with daemon set to --exec-opt isolation=hyperv as it would be for Client operating systems.
PS E:\go\src\github.com\docker\docker> dockerd -g c:\control --exec-opt isolation=hyperv
time="2017-02-01T15:48:09.657286100-08:00" level=info msg="Windows default isolation mode: hyperv"
time="2017-02-01T15:48:09.662720900-08:00" level=info msg="[graphdriver] using prior storage driver: windowsfilter"
time="2017-02-01T15:48:10.011588000-08:00" level=info msg="Graph migration to content-addressability took 0.00 seconds"
time="2017-02-01T15:48:10.016655800-08:00" level=info msg="Loading containers: start."
time="2017-02-01T15:48:10.460820000-08:00" level=info msg="Loading containers: done."
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Daemon has completed initialization"
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Docker daemon" commit=3c64061 graphdriver=windowsfilter version=1.14.0-dev
First with no explicit isolation:
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 7e0f41d08204
Removing intermediate container 236c7802042a
Step 3/5 : ENV GOROOT c:\installer
---> Running in 8ea5237183c1
---> 394b70435261
Removing intermediate container 8ea5237183c1
Step 4/5 : ADD go.exe .
---> e47401a1745c
Removing intermediate container 88dcc28e74b1
Step 5/5 : RUN go --help
---> Running in efe90e1b6b8b
container efe90e1b6b8b76586abc5c1dc0e2797b75adc26517c48733d90651e767c8463b encountered an error during CreateProcess: failure in a Windows system call: The directory name is invalid. (0x10b) extra info: {"ApplicationName":"","CommandLine":"cmd /S /C go --help","User":"","WorkingDirectory":"C:\\installer","Environment":{"GOROOT":"c:\\installer"},"EmulateConsole":false,"CreateStdInPipe":true,"CreateStdOutPipe":true,"CreateStdErrPipe":true,"ConsoleSize":[0,0]}
PS E:\docker\build\unifyworkdir>
Then forcing process isolation:
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 350c955980c8
Removing intermediate container 8339c1e9250c
Step 3/5 : ENV GOROOT c:\installer
---> Running in bde511c5e3e0
---> b8820063b5b6
Removing intermediate container bde511c5e3e0
Step 4/5 : ADD go.exe .
---> e4ac32f8902b
Removing intermediate container d586e8492eda
Step 5/5 : RUN go --help
---> Running in 9e1aa235af5f
Cannot mkdir: C:\installer is not a directory
PS E:\docker\build\unifyworkdir>
Now compare the same results after this PR. Again, first with no explicit isolation (defaulting to Hyper-V containers as that's what the daemon it set to) - note it now succeeds 😄
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 4f319f301c69
Removing intermediate container 61b9c0b1ff6f
Step 3/5 : ENV GOROOT c:\installer
---> Running in c464a1d612d8
---> 96a26ab9a7b5
Removing intermediate container c464a1d612d8
Step 4/5 : ADD go.exe .
---> 0290d61faf57
Removing intermediate container dc5a085fffe3
Step 5/5 : RUN go --help
---> Running in 60bd56042ff8
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
And the same with forcing process isolation. Also works 😄
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> f423b9cc3e78
Removing intermediate container 41330c88893d
Step 3/5 : ENV GOROOT c:\installer
---> Running in 0b99a2d7bf19
---> e051144bf8ec
Removing intermediate container 0b99a2d7bf19
Step 4/5 : ADD go.exe .
---> 7072e32b7c37
Removing intermediate container a7a97aa37fd1
Step 5/5 : RUN go --help
---> Running in 7097438a54e5
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
PS E:\docker\build\unifyworkdir>
This allows the user to set a logging mode to "blocking" (default), or
"non-blocking", which uses the ring buffer as a proxy to the real log
driver.
This allows a container to never be blocked on stdio at the cost of
dropping log messages.
Introduces 2 new log-opts that works for all drivers, `log-mode` and
`log-size`. `log-mode` takes a value of "blocking", or "non-blocking"
I chose not to implement this as a bool since it is difficult to
determine if the mode was set to false vs just not set... especially
difficult when merging the default daemon config with the container config.
`log-size` takes a size string, e.g. `2MB`, which sets the max size
of the ring buffer. When the max size is reached, it will start
dropping log messages.
```
BenchmarkRingLoggerThroughputNoReceiver-8 2000000000 36.2 ns/op 856.35 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputWithReceiverDelay0-8 300000000 156 ns/op 198.48 MB/s 32 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay1-8 2000000000 36.1 ns/op 857.80 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay10-8 1000000000 36.2 ns/op 856.53 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay50-8 2000000000 34.7 ns/op 894.65 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay100-8 2000000000 35.1 ns/op 883.91 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay300-8 1000000000 35.9 ns/op 863.90 MB/s 0 B/op 0 allocs/op
BenchmarkRingLoggerThroughputConsumeDelay500-8 2000000000 35.8 ns/op 866.88 MB/s 0 B/op 0 allocs/op
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to improve the display of `docker service ls`
and adds `--format` flag to `docker service ls`.
In addition to `--format` flag, several other improvement:
1. Updates `docker stacks service`.
2. Adds `servicesFormat` to config file.
Related docs has been updated.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 28176 where
text frame was used in websocket attach endpoint. In case
the data send out contains non utf8 data, the connection
will be closed in certain browsers, e.g., Safari.
This fix address the issue by change `PayloadType` to `BinaryFrame`.
This fix is tested manually with Safari. The docker daemon is inside a Linux Virtual Machine.
Create a container with:
```
docker run -itd --name websocket busybox sh -c "while true; do echo -e 'he\\xc3\\x28o'; sleep 5; done"
```
Use the following url (172.16.66.128:2375 is the tcp address of the daemon):
```
file:///websocket.html?url=ws://172.16.66.128:2375/v1.25/containers/websocket/attach/ws?logs=1&stderr=1&stdout=1&stream=1&stdin=1
```
and the following html:
```
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>Websocket</title>
<script type="text/javascript">
function DockerWebSocket() {
if ("WebSocket" in window) {
console.log("WebSocket is supported by Browser...")
// Remove '?url=' prefix
url = window.location.search.replace(/^(\?url=)/,"");
console.log("URL ["+url+"]...");
var ws = new WebSocket(url);
ws.onopen = function() {
console.log("Connection is opened...");
};
ws.onclose = function() {
console.log("Connection is closed...");
};
ws.onmessage = function (e) {
if (typeof e.data === "string") {
alert("WebSocket received text message ["+e.data+"]!")
} else {
console.log("Message is received...")
var blobReader = new FileReader();
blobReader.onload = function(event) {
console.log(JSON.stringify(blobReader.result))
};
blobReader.readAsText(e.data)
console.log("Message complete...")
}
};
} else {
alert("WebSocket is not supported by Browser!");
}
}
</script>
</head>
<body>
<div>
<a href="javascript:DockerWebSocket()">Run DockerWebSocket</a>
</div>
</body>
</html>
```
This fix fixes 28176.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the enhancement proposal raised in
27178 for filtering based on published or exposed ports of
`docker ps --filter`.
In this fix, two filter options, `publish` and `expose` have
been added to take either `<port>[/<protocol>]` or `<from>-<to>[/<protocol>]`
and filtering on containers.
An integration test has been added to cover the changes.
This fix fixes 27178.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter capability=[volumedriver|authz]` to `docker plugin ls`.
The related docs has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter enabled=true` to `docker plugin ls`,
as was specified in 28624.
The related API and docs has been updated.
An integration test has been added.
This fix fixes 28624.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This introduce a new `--device-cgroup-rule` flag that allow a user to
add one or more entry to the container cgroup device `devices.allow`
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Commit ed13c3abfb added flags
for Docker Content Trust. Depending on the `verify` boolean,
the message is "Skip image verification", or "Skip image signing".
"Signing" is intended for `docker push` / `docker plugin push`.
During the migration to Cobra, this boolean got flipped for
`docker push` (9640e3a451),
causing `docker push` to show the incorrect flag description.
This patch changes the flags to use the correct description
for `docker push`, and `docker plugin push`.
To prevent this confusion in future, the boolean argument
is removed, and a `AddTrustSigningFlags()` function is added.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the enhancement discussed in 28735 to add
`--format` for the output of `docker plugin ls`.
This fix
1. Add `--format` and `--quiet` flags to `docker plugin ls`
2. Convert the current implementation to use `formatter`, consistent with
other docker list commands.
3. Add `pluginsFormat` for config.json.
Related docs has been updated.
Several unit tests have been added to cover the changes.
This fix is related to 28708 and 28735.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Issue #30082 demonstrated that their is possible confusion with the "/."
where the tailing "." can appear to be merely punctuation within the
document rather than a highly pertinent part of `SRC_PATH`.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
* Depending on the host configuration between the docker engine and the remote host we wish to mount using sshfs, a password may be required.
* Confirmed syntax for optional parameter with @vieux
* Verified change works as desired with engine running on Ubuntu host and mounting a volume from a file system on a Mac.
Signed-off-by: David Williamson <david.williamson@docker.com>
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24596 where it was not
possible to join as manager only (`--availability=drain`).
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
NOTE: Additional pull request for swarmkit and engine-api will
be created separately.
This fix fixes 24596.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
At the "Build image from Dockerfile" section in the API docs
the Content-Type header is missing.
In addition, some parts in the code are still setting the
Content-Type header to application/tar while it was changed
to application/x-tar since 16th September 2015.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
This fix tries to add a placeholder `.CreatedAt` for Go
format template in `docker network ls --format`.
While working on 29226, I noticed that it is not possible to
display network's creation time in `docker network ls`, with or
without `--format`.
We are able to find the timestamp through `docker network inspect` though.
However, as we allows networks to be pruned based on the timestamp
(see 29226), showing the timestamp in `docker network ls --format`
would be much useful now.
This fix adds the `.CreatedAt` placeholder for `docker network ls --format`.
The default output was not changed for `docker network ls --format`.
A test case for unit tests has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up for comment
https://github.com/docker/docker/pull/28535#issuecomment-263215225
This fix provides `--filter until=<timestamp>` for `docker container/image prune`.
This fix adds `--filter until=<timestamp>` to `docker container/image prune`
so that it is possible to specify a timestamp and prune those containers/images
that are earlier than the timestamp.
Related docs has been updated
Several integration tests have been added to cover changes.
This fix fixes#28497.
This fix is related to #28535.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- Use the word letter rather than character to refer to letters ;) when trying to specify that only letters and numbers can be used, and not ANY character...
- Small corrections
Fixes#29821
Signed-off-by: Timothy Hobbs <timothy@hobbs.cz>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment
variable was added in a7c8bcac2b
but not documented.
This adds the variable to the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass the test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
In #28507 and #28885, `docker service/node ps -a` has been removed so that
information about slots are show up even without `-a` flag.
The output of `docker stack ps` reused the same output as `docker service/node ps`.
However, the `-a` was still there. It might make sense to remove `docker stack ps -a`
as well to bring consistency with `docker service/node ps`.
This fix is related to #28507, #28885, and #25983.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Change the `State` field of the `/containers/json` remote API response to lowercase.
This change involves docs/api/v1.23.md and docs/api/v1.24.md
Signed-off-by: Anran Qiao <anran.qiao@daocloud.io>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
commit bbd2018ee1
changed the output format of `docker service ps`.
this patch updates the reference docs
to match the updated output format.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Legacy plugins expect host-relative paths (such as for Volume.Mount).
However, a containerized plugin cannot respond with a host-relative
path. Therefore, this commit modifies new volume plugins' paths in Mount
and List to prepend the container's rootfs path.
This introduces a new PropagatedMount field in the Plugin Config.
When it is set for volume plugins, RootfsPropagation is set to rshared
and the path specified by PropagatedMount is bind-mounted with rshared
prior to launching the container. This is so that the daemon code can
access the paths returned by the plugin from the host mount namespace.
Signed-off-by: Tibor Vass <tibor@docker.com>
This fix tries to address the enhancement proposed in 28708 to display
ID field for the output of `docker plugin ls`.
This fix add `ID` field to the output of `docker plugin ls`
Related docs has been updated.
This fix fixes 28708.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in discussion of
PR 28735 where it was not possible to manage plugin based on
plugin ID. Previously it was not possible to invoke
`docker plugin inspect` with a plugin ID (or ID prefix).
This fix updates the implementation of `docker plugin inspect`
so that it is possbile to search based on a plugin name, or a
plugin ID. A short format of plugin ID (prefix) is also possible,
as long as there is no ambiguity.
Previously the check of `docker plugin inspect` was mostly done
on the client side. This could potentially cause inconsistency
between API and CMD. This fix move all the checks to daemon side
so that API and CMD will be consistent.
An integration test has been added to cover the changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
`docker stack config` command does not exists anymore, removing it
from the command reference documentation.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Jekyll automatically adds titles based on the title of the page,
so this was causing duplicate titles.
Also, made all the headings the correct level.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
Currently the help output of `docker network ls --filter` is:
```
Options:
-f, --filter value Provide filter values (i.e. 'dangling=true') (default [])
...
```
This caused confusion as only the following filters are supported at the moment:
- `driver`
- `type`
- `name`
- `id`
- `label`
This fix update the help output of `docker network ls --filter` and `network_ls.md`.
The `dangling=true` description has been replace to:
```
Options:
-f, --filter filter Provide filter values (i.e. 'driver=bridge')
...
```
This fix fixes 28786.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
See: https://github.com/docker/docker.github.io/pull/606
Also:
- Add missing redirects to API reference pages
- Remove v1.25 and 1.26, because they are being replaced with
swagger generated docs.
- Remove all other docs which aren't reference material, because
this can live in docker/docker.github.io
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
Adds section about the hub deprecating the v1 protocol.
Adds note about intent to disable by default and remove support.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The "--no-trunc" option toggles between showing/hiding
digests.
This updates the reference to show this difference.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Modify the service update and create APIs to return optional warning
messages as part of the response. Populate these messages with an
informative reason when digest resolution fails.
This is a small API change, but significantly improves the UX. The user
can now get immediate feedback when they've specified a nonexistent
image or unreachable registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When swarm-mode is disabled, we need to return an error indicating this.
406 was chosen for the "Not Acceptable" verbiage, but this code has
specific semantics in relation to the `Accept` header, which aren't
applicable here.
We now use a 503 for this case. While it is not a perfect match, it does
make it clear that the particular "service" (read: API endpoint) is not
available. The body of the message provides the user with enough
information to take action on it by enabling swarm-mode and ensuring the
service is available.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When inspecting a container, `NetworkSettings` contains top-level
information about the default ("bridge") network;
`EndpointID`, `Gateway`, `GlobalIPv6Address`, `GlobalIPv6PrefixLen`,
`IPAddress`, `IPPrefixLen`, `IPv6Gateway`, and `MacAddress`.
These properties are deprecated in favor of per-network properties in
`NetworkSettings.Networks`. These properties were already "deprecated" in
docker 1.9, but kept around for backward compatibility.
Refer to [#17538](https://github.com/docker/docker/pull/17538) for further
information.
This officially deprecates these properties, and marks them
for removal in 1.16
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix updates docs for `docker info` for most recent changes.
It also made several chagnes:
1. Replace 0.12.0-dev to 0.13.0 for api docs v1.24.
2. Replace 0.13.0-dev to 0.13.0 for api docs v1.25
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
It is not required to have version prefix for all the remote
APIs. Though there are still quite a few example requests
in api docs that does not have the version prefix.
This fix update the remote api docs to address this issue.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
A recent PR added `(ns|us|ms|s|m|h)` to the descriptions of some
duration options, but not all. Add it to the remaining options for
consistency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
… for `docker images`.
This deprecates the `filter` param for the `/images` endpoint and make a
new filter called `reference` to replace it. It does change the CLI
side (still possible to do `docker images busybox:musl`) but changes the
cli code to use the filter instead (so that `docker images --filter
busybox:musl` and `docker images busybox:musl` act the same).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This change incorporates feedback from @thaJeztah in the PR that added
the autolock flag. It changes the descriptions to be different for
"swarm init" and "swarm update" so that the boolean nature so that the
purpose of the flag in both contexts is clearer.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
See #21157 for more details.
In a future version of Docker, providing a version to API calls
will be mandatory. An implementation of this is in #27801.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
This fix is based on the comment:
https://github.com/docker/docker/pull/28147#discussion_r86996347
Previously the output string of the `DurationOpt` is `duration-ptr`
and `Uint64Opt` is `uint64-ptr`. While it is clear to developers,
for a normal user `-ptr` might not be very informative.
On the other hand, the default value of `DurationOpt` and `Uint64Opt`
has already been quite informative: `none`. That means if no flag
provided, the value will be treated as none.
(like a ptr with nil as the default)
For that reason this fix removes the `-ptr`.
Also, the output in the docs of `service create` has been quite
out-of-sync with the true output. So this fix updates the docs
to have the most up-to-date help output of `service create --help`.
This fix is related to #28147.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--dns-add`, `--dns-rm`, `--dns-opt-add`, `--dns-opt-rm`,
`--dns-search-add` and `--dns-search-rm` to `service update`.
An integration test and a unit test have been added to cover the changes in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the issue raised in 24391 about allowing
custom DNS settings to service definition.
This fix adds `DNSConfig` (`Nameservers`, `Options`, `Search`) to
service definition, as well as `--dns`, `--dns-opt`, and `dns-search`
to `service create`.
An integration test has been added to cover the changes in this fix.
This fix fixes 24391.
A PR in swarmkit will be created separately.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Add the following options to "swarm init" and "swarm update":
- --max-snapshots: Retain this many old Raft snapshots in addition
to the latest one
- --snapshot-interval: Number of log entries between Raft snapshots
These options already existed in SwarmKit and the Docker API but were
never exposed in the CLI. I'm adding them here to fix this oversight.
--max-snapshots may be useful for debugging purposes and more
conservative users who want to store rolling backups of old versions of
the Raft state.
--snapshot-interval is most useful for performance tuning. The default
value of 10000 may not be ideal for some setups.
There is also a LogEntriesForSlowFollowers option that is not exposed. I
decided not to expose it along with these others because I don't think
it's generally useful (and I'm not sure what I would call the CLI flag).
But if people want, I can expose it for the sake of completeness.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix is based on the comment in
https://github.com/docker/docker/pull/27567#discussion_r86910604
Basically, in the help output of `docker service update`, the `--xxx-add`
flags typically have plural forms while `--xxx-rm` flags have singular
forms.
This fix updates the help output for consistency.
This fix also updates the related docs in `service_update.md`.
The help output in `service_update.md` has been quite out-of-sync
with the actual output so this fix replaces the output with the
most up-to-date output.
This fix is related to #27567.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
update cobra and use Tags
Signed-off-by: Victor Vieux <vieux@docker.com>
allow client to talk to an older server
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to add `--tty` to `docker service create/update`. As was
specified in 25644, `TTY` flag has been added to SwarmKit and is
already vendored.
This fix add `--tty` to `docker service create/update`.
Related document has been updated.
Additional integration tests has been added.
This fix fixes 25644.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
PR 24978 adds hint of of progress to the output of `docker build`
for 1.13, in the format of
```
Step 1/5 ...
...
Step 2/5 ...
...
```
Though some of the docs hasn't been updated.
This fix did a grep in docs and updated the related places.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 27921 and add
`--cpus` flag for `docker run/create`.
Basically, `--cpus` will allow user to specify a number (possibly partial)
about how many CPUs the container will use. For example, on a 2-CPU system
`--cpus 1.5` means the container will take 75% (1.5/2) of the CPU share.
This fix adds a `NanoCPUs` field to `HostConfig` since swarmkit alreay
have a concept of NanoCPUs for tasks. The `--cpus` flag will translate
the number into reused `NanoCPUs` to be consistent.
This fix adds integration tests to cover the changes.
Related docs (`docker run` and Remote APIs) have been updated.
This fix fixes 27921.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Manager now auto-detects the address that an agent connects to the cluster
from and stores it. This is useful for many kinds of internal cluster
management tools.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Allow built images to be squash to scratch.
Squashing does not destroy any images or layers, and preserves the
build cache.
Introduce a new CLI argument --squash to docker build
Introduce a new param to the build API endpoint `squash`
Once the build is complete, docker creates a new image loading the diffs
from each layer into a single new layer and references all the parent's
layers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Commit dd28ded711
brought in new networking features and API, but
did not document the available IPAM options.
This adds a description of those options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If user namespaces is enabled on the daemon, reveal that via docker info
by adding "userns" to the list of security options reported by the
info endpoint.
Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
It seems that `max-concurrent-downloads` and `max-concurrent-uploads`
are supported in Windows for `config.json`. Though that was not
mentioned in the docs for dockerd.md.
This fix adds the following to the example `config.json` file for Windows:
```
"max-concurrent-downloads": 3,
"max-concurrent-uploads": 5,
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
As for `ps`, `images`, `network ls` and `volume ls`, this makes it
possible to define a custom default format.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
A HealthConfig entry was added to the ContainerSpec associated with the
service being created or updated.
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
