It's used for updating properties of one or more containers, we only
support resource configs for now. It can be extended in the future.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This patches avoids registering (and calling) the same plugin more than
once. Using an helper map which indexes by name guarantees this and keeps
the order.
The behavior of overriding the same name in a flag is consistent with,
for instance, the `docker run -v /test -v /test` flag which register
the volume just once.
Adds integration tests.
Without this patch:
```
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.080901676+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081213202+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081268132+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081699788+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.081762507+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.082092480+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.628691038+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
Dec 20 19:34:52 localhost.localdomain docker[9988]:
time="2015-12-20T19:34:52.629880930+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
With this patch:
```
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376523958+01:00" level=debug msg="Calling
GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376715483+01:00" level=debug msg="AuthZ
request using plugin docker-novolume-plugin"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.376771230+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.377698897+01:00" level=debug msg="GET
/v1.22/info"
Dec 20 19:37:32 localhost.localdomain docker[16620]:
time="2015-12-20T19:37:32.951016441+01:00" level=debug msg="AuthZ
response using plugin docker-novolume-plugin"
```
Also removes a somehow duplicate debug statement (leaving only the
second one as it's a loop of plugin's manifest):
```
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544090518+01:00" level=debug
msg="docker-novolume-plugin's manifest: &{[authz]}"
Dec 20 19:52:30 localhost.localdomain docker[25767]:
time="2015-12-20T19:52:30.544170677+01:00" level=debug
msg="docker-novolume-plugin implements: authz"
```
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Add filter support for `network ls` to hide predefined network,
then user can use "docker network rm `docker network ls -f type=custom`"
to delete a bundle of userdefined networks.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
We keep only one logic to test event related behavior that will help us
diagnose flacky event errors.
Signed-off-by: David Calavera <david.calavera@gmail.com>
If you run a
docker run command with --tmpfs /mountpoint:noexec
Or certain options that get translated into mount options, the mount command can get passed "" for mount data.
So this should be valid.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
- Make the API client library completely standalone.
- Move windows partition isolation detection to the client, so the
driver doesn't use external types.
Signed-off-by: David Calavera <david.calavera@gmail.com>
PR #18590 caused compatibility issues with registries such as gcr.io
which support both the v1 and v2 protocols, but do not provide the same
set of images over both protocols. After #18590, pulls from these
registries would never use the v1 protocol, because of the
Docker-Distribution-Api-Version header indicating that v2 was supported.
Fix the problem by making an exception for the case where a manifest is
not found. This should allow fallback to v1 in case that image is
exposed over the v1 protocol but not the v2 protocol.
This avoids the overly aggressive fallback behavior before #18590 which
would allow protocol fallback after almost any error, but restores
interoperability with mixed v1/v2 registry setups.
Fixes#18832
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Right now, the quiet (-q, --quiet) flag ignores the output
generated from within the container.
However, it ought to be quiet in a way that all kind
of diagnostic output should be ignored, unless the build
process fails.
This patch makes the quiet flag behave in the following way:
1. If the build process succeeds, stdout contains the image ID
and stderr is empty.
2. If the build process fails, stdout is empty and stderr
has the error message and the diagnostic output of that process.
If the quiet flag is not set, then everything goes to stdout
and error messages, if there are any, go to stderr.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
- fix naming and formatting
- provide more context when erroring auth
- do not capitalize errors
- fix wrong documentation
- remove ugly remoteError{}
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
/dev/sda wasn't an invalid device and this test failed, so, hopefully
/dev/sdX isn't going to exist in other envs.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
These filters are only use to interchange data between clients and daemons.
They don't belong to the parsers package.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Move time json marshaling to the jsonlog package: this is a docker
internal hack that we should not promote as a library.
- Move Timestamp encoding/decoding functions to the API types: This is
only used there. It could be a standalone library but I don't this
it's worth having a separated repo for this. It could introduce more
complexity than it solves.
Signed-off-by: David Calavera <david.calavera@gmail.com>
After addition of multi-host networking in Docker 1.9, Docker Remote
API is still returning only the network specified during creation
of the container in the “List Containers” (`/containers/json`) endpoint:
...
"HostConfig": {
"NetworkMode": "default"
},
The list of networks containers are attached to is only available at
Get Container (`/containers/<id>/json`) endpoint.
This does not allow applications utilizing multi-host networking to
be built on top of Docker Remote API.
Therefore I added a simple `"NetworkSettings"` section to the
`/containers/json` endpoint. This is not identical to the NetworkSettings
returned in Get Container (`/containers/<id>/json`) endpoint. It only
contains a single field `"Networks"`, which is essentially the same
value shown in inspect output of a container.
This change adds the following section to the `/containers/json`:
"NetworkSettings": {
"Networks": {
"bridge": {
"EndpointID": "2cdc4edb1ded3631c81f57966563e...",
"Gateway": "172.17.0.1",
"IPAddress": "172.17.0.2",
"IPPrefixLen": 16,
"IPv6Gateway": "",
"GlobalIPv6Address": "",
"GlobalIPv6PrefixLen": 0,
"MacAddress": "02:42:ac:11:00:02"
}
}
}
This is of type `SummaryNetworkSettings` type, a minimal version of
`api/types#NetworkSettings`.
Actually all I need is the network name and the IPAddress fields. If folks
find this addition too big, I can create a `SummaryEndpointSettings` field
as well, containing just the IPAddress field.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
