This commit in conjunction with a libnetwork side commit,
cleans up the libnetwork SetClusterProvider logic interaction.
The previous code was inducing libnetwork to spawn several go
routines that were racing between each other during the agent
init and close.
A test got added to verify that back to back swarm init and leave
are properly processed and not raise crashes
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This new flag will allow the configuration of an interface that
can be used for data path traffic to be isolated from control
plane traffic. This flag is simply percolated down to libnetwork
and will be used by all the global scope drivers (today overlay)
Negative test added for invalid flag arguments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
swarmkit's API type. Make sure this parameter gets propagated to
swarmkit, and also add an extra option to the CLI when providing
external CAs to parse the CA cert from a file.
Signed-off-by: Ying Li <ying.li@docker.com>
Resolve networks IDs on the client side.
Avoid filling in deprecated Spec.Networks field.
Sort networks in the TaskSpec for update stability.
Add an integration test for changing service networks.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Change "service create" and "service update" to wait until the creation
or update finishes, when --detach=false is specified. Show progress bars
for the overall operation and for each individual task (when there are a
small enough number of tasks), unless "-q" / "--quiet" is specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add some required command operators to the `cli` package, and update
some tests to use this package, in order to remove a few functions
from `docker_utils_test.go`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the request in 31325 by adding
`--filter mode=global|replicated` to `docker service ls`.
As `docker service ls` has a `MODE` column by default, it is natural
to support `--filter mode=global|replicated` for `docker service ls`.
There are multiple ways to address the issue. One way is to pass
the filter of mode to SwarmKit, another way is to process the filter
of mode in the daemon.
This fix process the filter in the daemon.
Related docs has been updated.
An integration test has been added.
This fix fixes 31325.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 25696 where
it was not possible to specify `--stop-signal` for `docker service create`
and `docker service update`, in order to use special signal to stop
the container.
This fix adds `--stop-signal` and update the `StopSignal` in `Config`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 25696.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- otherwise the attachment task will stay in store and
consume IP addresses and there is no way to remove it.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This fix is partially based on comment
https://github.com/docker/docker/issues/30242#issuecomment-273517205
Currently, `docker network inspect` relies on `FindNetwork()` which
does not take into consideration that multiple networks with the same
name might exist.
This fix propose to return `docker network inspect` in a similiar
fashion like other commands:
1. Lookup full ID
2. Lookup full name
3. Lookup partial ID
If multiple networks exist, an error will be returned.
NOTE: this fix is not a complete fix for the issue raised in
https://github.com/docker/docker/issues/30242#issuecomment-273517205
where SwarmKit is unable to update when multiple networks with the same
name exit.
To fix that issue requires multiple places when `FindNetwork()` is called.
Because of the impact of changing `FindNetwork()`, this fix focus on
the issue in `docker network inspect`.
A separate PR will be created to address
https://github.com/docker/docker/issues/30242#issuecomment-273517205
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- When the node leaves the cluster, if any user run
container(s) is connected to the swarm network,
then daemon needs to detach the container(s) and
remove the network.
Signed-off-by: Alessandro Boch <aboch@docker.com>
to make goreportcard a bit happier
https://goreportcard.com/report/github.com/docker/docker
also found that `TestCpToErrDstParentNotExists()` was
partially broken, because a `runDockerCp()` was inadvertently
removed in f26a31e80c
`TestDaemonRestartSaveContainerExitCode()` didn't verify
the actual _Error_ message, so added that to the test,
and updated the test to take into account that the
"experimental" CI enables `--init` on containers.
`TestVolumeCLICreateOptionConflict()` only checked
for an error to occur, but didn't validate if the
error was due to conflicting options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There is an issue with the ports leaking to other tests.
This is a workaround until the actual problem is addressed.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24596 where it was not
possible to join as manager only (`--availability=drain`).
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
NOTE: Additional pull request for swarmkit and engine-api will
be created separately.
This fix fixes 24596.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in docker/docker-29730
where a service with multiple published ports mapping to the same target
port (e.g., `--publish 5000:80 --publish 5001:80`) can't be allocated.
The reason for the issue is that, `getPortConfigKey` is used for both
allocated ports and configured (may or may not be allocated) ports.
However, `getPortConfigKey` will not take into consideration the
`PublishedPort` field, which actually could be different for different
allocated ports.
This fix saves a map of `portKey:portNum:portState`, instead of currently
used `portKey:portState` so that multiple published ports could be processed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Start work on adding unit tests to our cli code in order to have to
write less costly integration test.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
check to see if the node is part of a swarm, and if so, if it is unlocked first.
If neither of these are true, abort the command.
Signed-off-by: Ying Li <ying.li@docker.com>
Previously, it doesn't allow creating such a network:
e.g.
$ docker network inspect -f '{{.Id}}' ingress
84xh9knigj6zyt00u31e26nj3
$ docker network create 84
Error response from daemon: network with name 84 already exists
Fix#27866
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
… to make sure it doesn't fail. It also introduce StartWithError,
StopWithError and RestartWithError in case we care about the
error (and want the error to happen).
This removes the need to check for error and make the intent more
clear : I want a deamon with busybox loaded on it — if an error occur
it should fail the test, but it's not the test code that has the
responsability to check that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to fix the issue raised in 29044 where
the IPAM options is missing in swarm network mode
after the service is deployed. Before the service
is deployed, the IPAM options is available.
The reason for the issue is that, before service is
deployed, `network inspect` is querying the swarm and
obtained the correct information.
However, after service is deployed, swarm executor
does not pass the IPAM options to the backend (daemon).
Also after service is deployed, `network inspect` is
actually querying the local daemon for information.
At this time the network information with missing IPAM
options is returned.
This fix fixes the issue by updating the swarm network
allocator and swarm executor.
A separate PR for swarmkit will be opened.
An integration test has been added to cover the change.
This fix fixes 29044.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
