None of the daemon flags use a constant for the
flag name.
This patch removes the constant for consistency
Also removes a FIXME, that was now in the wrong
location, and added a long time ago in
353b7c8ec7,
without a lot of context (and probably no longer really relevant).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Even though the flag `--api-enable-cors` is deprecated in favor of
`--api-cors-header`. Using only `--api-cors-header` does not enable
CORS.
Make changes to 'cmd/dockerd/daemon.go' to enable cors if either of
the above flags is set.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
When the daemon is configured to run with an authorization-plugin and if
the plugin is disabled, the daemon continues to send API requests to the
plugin and expect it to respond. But the plugin has been disabled. As a
result, all API requests are blocked. Fix this behavior by removing the
disabled plugin from the authz middleware chain.
Tested using riyaz/authz-no-volume-plugin and observed that after
disabling the plugin, API request/response is functional.
Fixes#31836
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
This also moves some cli specific in `cmd/dockerd` as it does not
really belong to the `daemon/config` package.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Go style calls for mixed caps instead of all caps:
https://golang.org/doc/effective_go.html#mixed-caps
Change LOOKUP, ACQUIRE, and RELEASE to Lookup, Acquire, and Release.
This vendors a fork of libnetwork for now, to deal with a cyclic
dependency issue. The change will be upstream to libnetwork once this is
merged.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Instead of not adding experimental routes at all, fail with an explicit
message if the daemon is not running in experimental mode.
Added the `router.Experimental` which does this automatically.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
update cobra and use Tags
Signed-off-by: Victor Vieux <vieux@docker.com>
allow client to talk to an older server
Signed-off-by: Victor Vieux <vieux@docker.com>
This adds a metrics packages that creates additional metrics. Add the
metrics endpoint to the docker api server under `/metrics`.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add metrics to daemon package
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
api: use standard way for metrics route
Also add "type" query parameter
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Convert timers to ms
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
`docker network prune` prunes unused networks, including overlay ones.
`docker system prune` also prunes unused networks.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This fix tries to address the issue raised in 24392 where
labels with duplicate keys exist in `docker info`, which
contradicts with the specifications in the docs.
The reason for duplicate keys is that labels are stored as
slice of strings in the format of `A=B` (and the input/output).
This fix tries to address this issue by checking conflict
labels when daemon started, and remove duplicate labels (K-V).
The existing `/info` API has not been changed.
An additional integration test has been added to cover the
changes in this fix.
This fix fixes 24392.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The swarm scope network connected containers with autostart enabled
there was a dependency problem with the cluster to be initialized before
we can autostart them. With the current container restart code happening
before cluster init, these containers were not getting autostarted
properly. Added a fix to delay the container start of those containers
which has atleast one swarm scope endpoint to until after the cluster is
initialized.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Right now docker puts swarm's control socket into the docker root dir
(e.g. /var/lib/docker).
This can cause some nasty issues with path length being > 108
characters, especially in our CI environment.
Since we already have some other state going in the daemon's exec root
(libcontainerd and libnetwork), I think it makes sense to move the
control socket to this location, especially since there are other unix
sockets being created here by docker so it must always be at a path that
works.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Following #22729, enable to dynamically reload/remove the daemon
authorization plugins (via standard reloading mechanism).
https://docs.docker.com/engine/reference/commandline/daemon/#daemon-
configuration-file
Daemon must store a reference to the authorization middleware to refresh
the plugin on configuration changes.
Signed-off-by: Liron Levin <liron@twistlock.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fixes the hard coded restriction for non-linux platforms to v2 registries. Previously, the check was above the flag parsing, which would overwrite the hard coded value and prevent correct operation. This change also removes the related daemon flag from Windows to avoid confusion, as it has no meaning when the value is going to always be hard coded to true.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
This patch introduces a new experimental engine-level plugin management
with a new API and command line. Plugins can be distributed via a Docker
registry, and their lifecycle is managed by the engine.
This makes plugins a first-class construct.
For more background, have a look at issue #20363.
Documentation is in a separate commit. If you want to understand how the
new plugin system works, you can start by reading the documentation.
Note: backwards compatibility with existing plugins is maintained,
albeit they won't benefit from the advantages of the new system.
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Using golang 1.6, is it now possible to ignore SIGPIPE events on
stdout/stderr. Previous versions of the golang library cached 10
events and then killed the process receiving the events.
systemd-journald sends SIGPIPE events when jounald is restarted and
the target of the unit file writes to stdout/stderr. Docker logs to stdout/stderr.
This patch silently ignores all SIGPIPE events.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
