Rather than bifurcate the test completely, this lets us keep the test
intact with a small function wrapper to allow the compiler to build the
code that'll never be called on Windows, on Windows.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Before this change, the error returned to the user would include the physical
path inside the tmp dir on the daemon host. These paths should be considered
an implementation detail, and provide no value to the user. Printing the tmp
path can confuse users, and will be even more confusing if the daemon is running
remotely (or in a VM, such as on Docker Desktop), in which case the path in the
error message does not exist on the local machine;
echo -e "FROM busybox\nCOPY /some/non-existing/file.txt ." | DOCKER_BUILDKIT=0 docker build -f- .
Sending build context to Docker daemon 1.57kB
Step 1/2 : FROM busybox
---> 1c35c4412082
Step 2/2 : COPY /some/non-existing/file.txt .
COPY failed: stat /var/lib/docker/tmp/docker-builder405687992/some/non-existing/file.txt: no such file or directory
When copying files from an image or a build stage, using `--from`, the error
is similarly confusing:
echo -e "FROM busybox\nCOPY --from=busybox /some/non-existing/file.txt ." | DOCKER_BUILDKIT=0 docker build -f- .
Sending build context to Docker daemon 4.671kB
Step 1/2 : FROM busybox
---> 018c9d7b792b
Step 2/2 : COPY --from=busybox /some/non-existing/file.txt .
COPY failed: stat /var/lib/docker/overlay2/ef34239c80526c779b7afaeaedbf11c1b201d7f7681d45613102c4541da0e156/merged/some/non-existing/file.txt: no such file or directory
This patch updates the error messages to be more user-friendly. Changes are slightly
different, depending on if the source was a local path, or an image (or build-stage),
using `--from`.
If `--from` is used, only the path is updated, and we print the relative path
instead of the full path;
echo -e "FROM busybox\nCOPY --from=busybox /some/non-existing/file.txt ." | DOCKER_BUILDKIT=0 docker build -f- .
Sending build context to Docker daemon 1.583kB
Step 1/2 : FROM busybox
---> 018c9d7b792b
Step 2/2 : COPY --from=busybox /some/non-existing/file.txt .
COPY failed: stat some/non-existing/file.txt: file does not exist
In other cases, additional information is added to mention "build context" and
".dockerignore", which could provide the user some hints to find the problem:
echo -e "FROM busybox\nCOPY /some/non-existing/file.txt ." | DOCKER_BUILDKIT=0 docker build -f- .
Sending build context to Docker daemon 1.583kB
Step 1/2 : FROM busybox
---> 018c9d7b792b
Step 2/2 : COPY /some/non-existing/file.txt .
COPY failed: file not found in build context or excluded by .dockerignore: stat some/non-existing/file.txt: file does not exist
echo -e "FROM busybox\nADD /some/non-existing/file.txt ." | DOCKER_BUILDKIT=0 docker build -f- .
Sending build context to Docker daemon 1.583kB
Step 1/2 : FROM busybox
---> 018c9d7b792b
Step 2/2 : ADD /some/non-existing/file.txt .
ADD failed: file not found in build context or excluded by .dockerignore: stat some/non-existing/file.txt: file does not exist
This patch only improves the error for the classic builder. Similar changes could
be made for BuildKit, which produces equally, or even more confusing errors;
echo -e "FROM busybox\nCOPY /some/non-existing/file.txt ." | DOCKER_BUILDKIT=1 docker build -f- .
[+] Building 1.2s (6/6) FINISHED
=> [internal] load build definition from Dockerfile 0.0s
=> => transferring dockerfile: 85B 0.0s
=> [internal] load .dockerignore 0.0s
=> => transferring context: 2B 0.0s
=> [internal] load metadata for docker.io/library/busybox:latest 1.2s
=> [internal] load build context 0.0s
=> => transferring context: 2B 0.0s
=> CACHED [1/2] FROM docker.io/library/busybox@sha256:4f47c01... 0.0s
=> ERROR [2/2] COPY /some/non-existing/file.txt . 0.0s
------
> [2/2] COPY /some/non-existing/file.txt .:
------
failed to compute cache key: failed to walk /var/lib/docker/tmp/buildkit-mount181923793/some/non-existing:
lstat /var/lib/docker/tmp/buildkit-mount181923793/some/non-existing: no such file or directory
echo -e "FROM busybox\nCOPY --from=busybox /some/non-existing/file.txt ." | DOCKER_BUILDKIT=1 docker build -f- .
[+] Building 2.5s (6/6) FINISHED
=> [internal] load build definition from Dockerfile 0.0s
=> => transferring dockerfile: 100B 0.0s
=> [internal] load .dockerignore 0.0s
=> => transferring context: 2B 0.0s
=> [internal] load metadata for docker.io/library/busybox:latest 1.2s
=> FROM docker.io/library/busybox:latest 1.2s
=> => resolve docker.io/library/busybox:latest 1.2s
=> CACHED [stage-0 1/2] FROM docker.io/library/busybox@sha256:4f47c01... 0.0s
=> ERROR [stage-0 2/2] COPY --from=busybox /some/non-existing/file.txt . 0.0s
------
> [stage-0 2/2] COPY --from=busybox /some/non-existing/file.txt .:
------
failed to compute cache key: failed to walk /var/lib/docker/overlay2/2a796d91e46fc038648c6010f062bdfd612ee62b0e8fe77bc632688e3fba32d9/merged/some/non-existing:
lstat /var/lib/docker/overlay2/2a796d91e46fc038648c6010f062bdfd612ee62b0e8fe77bc632688e3fba32d9/merged/some/non-existing: no such file or directory
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For some time, we defined a minimum limit for `--memory` limits to account for
overhead during startup, and to supply a reasonable functional container.
Changes in the runtime (runc) introduced a higher memory footprint during container
startup, which now lead to obscure error-messages that are unfriendly for users:
run --rm --memory=4m alpine echo success
docker: Error response from daemon: OCI runtime create failed: container_linux.go:349: starting container process caused "process_linux.go:449: container init caused \"process_linux.go:415: setting cgroup config for procHooks process caused \\\"failed to write \\\\\\\"4194304\\\\\\\" to \\\\\\\"/sys/fs/cgroup/memory/docker/1254c8d63f85442e599b17dff895f4543c897755ee3bd9b56d5d3d17724b38d7/memory.limit_in_bytes\\\\\\\": write /sys/fs/cgroup/memory/docker/1254c8d63f85442e599b17dff895f4543c897755ee3bd9b56d5d3d17724b38d7/memory.limit_in_bytes: device or resource busy\\\"\"": unknown.
ERRO[0000] error waiting for container: context canceled
Containers that fail to start because of this limit, will not be marked as OOMKilled,
which makes it harder for users to find the cause of the failure.
Note that _after_ this memory is only required during startup of the container. After
the container was started, the container may not consume this memory, and limits
could (manually) be lowered, for example, an alpine container running only a shell
can run with 512k of memory;
echo 524288 > /sys/fs/cgroup/memory/docker/acdd326419f0898be63b0463cfc81cd17fb34d2dae6f8aa3768ee6a075ca5c86/memory.limit_in_bytes
However, restarting the container will reset that manual limit to the container's
configuration. While `docker container update` would allow for the updated limit to
be persisted, (re)starting the container after updating produces the same error message
again, so we cannot use different limits for `docker run` / `docker create` and `docker update`.
This patch raises the minimum memory limnit to 6M, so that a better error-message is
produced if a user tries to create a container with a memory-limit that is too low:
docker create --memory=4m alpine echo success
docker: Error response from daemon: Minimum memory limit allowed is 6MB.
Possibly, this constraint could be handled by runc, so that different runtimes
could set a best-matching limit (other runtimes may require less overhead).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
A newer runc changed [1] a couple of certain error messages checked in this
test to be lowercased, which lead to a mismatch in this test case.
Fix is to remove "The" (which was replaced with "the").
[1] https://github.com/opencontainers/runc/pull/2441
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Currently default capability CAP_NET_RAW allows users to open ICMP echo
sockets, and CAP_NET_BIND_SERVICE allows binding to ports under 1024.
Both of these are safe operations, and Linux now provides ways that
these can be set, per container, to be allowed without any capabilties
for non root users. Enable these by default. Users can revert to the
previous behaviour by overriding the sysctl values explicitly.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
- Add tests to ensure it's working
- Rename variables for better clarification
- Fix validation test
- Remove wrong filter assertion based on publish filter
- Change port on test
Signed-off-by: Jaime Cepeda <jcepedavillamayor@gmail.com>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Switch to moby/sys/mount and mountinfo. Keep the pkg/mount for potential
outside users.
This commit was generated by the following bash script:
```
set -e -u -o pipefail
for file in $(git grep -l 'docker/docker/pkg/mount"' | grep -v ^pkg/mount); do
sed -i -e 's#/docker/docker/pkg/mount"#/moby/sys/mount"#' \
-e 's#mount\.\(GetMounts\|Mounted\|Info\|[A-Za-z]*Filter\)#mountinfo.\1#g' \
$file
goimports -w $file
done
```
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This test was temporarily disabled (see moby/moby#35023) because of a bug in
Windows RS3 and RS4 causing duplicate port mappings to not be detected, and
not causing an error.
This bug was fixed as MSFT:14083260 on 10/31/2017, and backported to RS3 in
November/December 2017.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Rewrite sockRequestHijack to requestHijack which use writable
Transport's Response.Body to replace deprecated hijacked httputil.ClientConn.
```
// As of Go 1.12, the Body will also implement io.Writer
// on a successful "101 Switching Protocols" response,
// as used by WebSockets and HTTP/2's "h2c" mode.
Body io.ReadCloser
```.
TestPostContainersAttach and TestExecResizeImmediatelyAfterExecStart
replace all sockRequestHijack to requestHijack.
Signed-off-by: HuanHuan Ye <logindaveye@gmail.com>
Now that we marked these utilities as helpers, it should be
possible to find which test-case failed (if any), and we
can skip logging in the "happy path".
This makes these tests less noisy, which makes it easier
to find actually important information in the output:
--- PASS: TestDockerSuite/TestCpFromCaseC (0.96s)
docker_cli_cp_utils_test.go:244: checking that file "/tmp/test-cp-from-case-c450122079/file2" contains "file2\n"
docker_cli_cp_utils_test.go:192: running `docker cp 962b1f3311e742b0842e13b2ad350214cea25883999fd26e87e8c9ddf40d5eb4:/root/file1 /tmp/test-cp-from-case-c450122079/file2`
docker_cli_cp_utils_test.go:244: checking that file "/tmp/test-cp-from-case-c450122079/file2" contains "file1\n"
Some of these tests should probably be rewritten to use subtests,
but that's something for a follow-up.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Updated TestInfoSecurityOptions to not rely on CLI output. Note that this
test should be migrated to the integration suite, but that suite does not yet
have checks for "Seccomp" and "AppArmor"
- TestInfoAPIWarnings: don't start with busybox because we're not running containers in this test
- Migrate TestInfoDebug to integration suite
- Migrate TestInsecureRegistries to integration suite (renamed to TestInfoInsecureRegistries)
- Migrate TestRegistryMirrors to integration suite (renamed to TestInfoRegistryMirrors)
- Migrate TestInfoDiscoveryBackend to integration suite
- Migrate TestInfoDiscoveryInvalidAdvertise to integration suite
- Migrate TestInfoDiscoveryAdvertiseInterfaceName to integration suite
- Remove TestInfoFormat, which is testing the CLI functionality, and there is an
existing test in docker/cli (TestFormatInfo) covering this
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes the test less noisy, and won't print the `failed: Error ...` messages,
which were confusing.
Also, running as a subtest allows tracking failures individually through the
junit.xml files.
Before:
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup (3.00s)
daemon.go:26: Creating a new daemon at: "/go/src/github.com/docker/docker/bundles/test-integration/TestDockerSwarmSuite/TestSwarmNetworkCreateDup"
docker_cli_swarm_test.go:1527: Creating a network named "network-test-0" with "bridge", then "bridge"
docker_cli_swarm_test.go:1534: As expected, the attempt to network "network-test-0" with "bridge" failed: Error response from daemon: network with name network-test-0 already exists
docker_cli_swarm_test.go:1527: Creating a network named "network-test-0" with "bridge", then "overlay"
docker_cli_swarm_test.go:1534: As expected, the attempt to network "network-test-0" with "overlay" failed: Error response from daemon: network with name network-test-0 already exists
docker_cli_swarm_test.go:1527: Creating a network named "network-test-1" with "overlay", then "bridge"
docker_cli_swarm_test.go:1534: As expected, the attempt to network "network-test-1" with "bridge" failed: Error response from daemon: network with name network-test-1 already exists
docker_cli_swarm_test.go:1527: Creating a network named "network-test-1" with "overlay", then "overlay"
docker_cli_swarm_test.go:1534: As expected, the attempt to network "network-test-1" with "overlay" failed: Error response from daemon: network with name network-test-1 already exists
After:
=== RUN TestDockerSwarmSuite
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_bridge_then_bridge
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_bridge_then_overlay
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_overlay_then_bridge
=== RUN TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_overlay_then_overlay
--- PASS: TestDockerSwarmSuite (8.12s)
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup (8.12s)
daemon.go:26: Creating a new daemon at: "/go/src/github.com/docker/docker/bundles/test-integration/TestDockerSwarmSuite/TestSwarmNetworkCreateDup"
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_bridge_then_bridge (0.52s)
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_bridge_then_overlay (0.31s)
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_overlay_then_bridge (0.17s)
--- PASS: TestDockerSwarmSuite/TestSwarmNetworkCreateDup/driver_overlay_then_overlay (0.12s)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before:
daemon.go:26: Creating a new daemon at: "/go/src/github.com/docker/docker/bundles/test-integration/TestDockerSwarmSuite/TestSwarmNetworkCreateDup"
After:
docker_cli_swarm_test.go:1522: Creating a new daemon at: "/go/src/github.com/docker/docker/bundles/test-integration/TestDockerSwarmSuite/TestSwarmNetworkCreateDup"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
