- Don't set `PidsLimit` when creating a container and
no limit was set (or the limit was set to "unlimited")
- Don't set `PidsLimit` if the host does not have pids-limit
support (previously "unlimited" was set).
- Do not generate a warning if the host does not have pids-limit
support, but pids-limit was set to unlimited (having no
limit set, or the limit set to "unlimited" is equivalent,
so no warning is nescessary in that case).
- When updating a container, convert `0`, and `-1` to
"unlimited" (`0`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This changes the default ipc mode of daemon/engine to be private,
meaning the containers will not have their /dev/shm bind-mounted
from the host by default. The benefits of doing this are:
1. No leaked mounts. Eliminate a possibility to leak mounts into
other namespaces (and therefore unfortunate errors like "Unable to
remove filesystem for <ID>: remove /var/lib/docker/containers/<ID>/shm:
device or resource busy").
2. Working checkpoint/restore. Make `docker checkpoint`
not lose the contents of `/dev/shm`, but save it to
the dump, and be restored back upon `docker start --checkpoint`
(currently it is lost -- while CRIU handles tmpfs mounts,
the "shareable" mount is seen as external to container,
and thus rightfully ignored).
3. Better security. Currently any container is opened to share
its /dev/shm with any other container.
Obviously, this change will break the following usage scenario:
$ docker run -d --name donor busybox top
$ docker run --rm -it --ipc container:donor busybox sh
Error response from daemon: linux spec namespaces: can't join IPC
of container <ID>: non-shareable IPC (hint: use IpcMode:shareable
for the donor container)
The soution, as hinted by the (amended) error message, is to
explicitly enable donor sharing by using --ipc shareable:
$ docker run -d --name donor --ipc shareable busybox top
Compatibility notes:
1. This only applies to containers created _after_ this change.
Existing containers are not affected and will work fine
as their ipc mode is stored in HostConfig.
2. Old backward compatible behavior ("shareable" containers
by default) can be enabled by either using
`--default-ipc-mode shareable` daemon command line option,
or by adding a `"default-ipc-mode": "shareable"`
line in `/etc/docker/daemon.json` configuration file.
3. If an older client (API < 1.40) is used, a "shareable" container
is created. A test to check that is added.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
There are two if statements checking for exactly same conditions:
> if hostConfig != nil && versions.LessThan(version, "1.40")
Merge these.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Older API clients did not use a pointer for `PidsLimit`, so
API requests would always send `0`, resulting in any previous
value to be reset after an update:
Before this patch:
(using a 17.06 Docker CLI):
```bash
docker run -dit --name test --pids-limit=16 busybox
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container update --memory=100M --memory-swap=200M test
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
0
docker container exec test cat /sys/fs/cgroup/pids/pids.max
max
```
With this patch applied:
(using a 17.06 Docker CLI):
```bash
docker run -dit --name test --pids-limit=16 busybox
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container update --memory=100M --memory-swap=200M test
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container exec test cat /sys/fs/cgroup/pids/pids.max
16
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Add support for exact list of capabilities, support only OCI model
- Support OCI model on CapAdd and CapDrop but remain backward compatibility
- Create variable locally instead of declaring it at the top
- Use const for magic "ALL" value
- Rename `cap` variable as it overlaps with `cap()` built-in
- Normalize and validate capabilities before use
- Move validation for conflicting options to validateHostConfig()
- TweakCapabilities: simplify logic to calculate capabilities
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The cancellable handler is no longer needed as the context that is
passed with the http request will be cancelled just like the close
notifier was doing.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows non-recursive bind-mount, i.e. mount(2) with "bind" rather than "rbind".
Swarm-mode will be supported in a separate PR because of mutual vendoring.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Since Go 1.7, context is a standard package. Since Go 1.9, everything
that is provided by "x/net/context" is a couple of type aliases to
types in "context".
Many vendored packages still use x/net/context, so vendor entry remains
for now.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of having to create a bunch of custom error types that are doing
nothing but wrapping another error in sub-packages, use a common helper
to create errors of the requested type.
e.g. instead of re-implementing this over and over:
```go
type notFoundError struct {
cause error
}
func(e notFoundError) Error() string {
return e.cause.Error()
}
func(e notFoundError) NotFound() {}
func(e notFoundError) Cause() error {
return e.cause
}
```
Packages can instead just do:
```
errdefs.NotFound(err)
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When the client closes websocket connections that sends container
output through websocket, an error message is displayed:
"Error attaching websocket: %!s(<nil>)"
This message is misleading. Thus, this change suggests to check
if error is nil and print the correct message accordingly.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Currently, if a container removal has failed for some reason,
any client waiting for removal (e.g. `docker run --rm`) is
stuck, waiting for removal to succeed while it has failed already.
For more details and the reproducer, please check
https://github.com/moby/moby/issues/34945
This commit addresses that by allowing `ContainerWait()` with
`container.WaitCondition == "removed"` argument to return an
error in case of removal failure. The `ContainerWaitOKBody`
stucture returned to a client is amended with a pointer to `struct Error`,
containing an error message string, and the `Client.ContainerWait()`
is modified to return the error, if any, to the client.
Note that this feature is only available for API version >= 1.34.
In order for the old clients to be unstuck, we just close the connection
without writing anything -- this causes client's error.
Now, docker-cli would need a separate commit to bump the API to 1.34
and to show an error returned, if any.
[v2: recreate the waitRemove channel after closing]
[v3: document; keep legacy behavior for older clients]
[v4: convert Error from string to pointer to a struct]
[v5: don't emulate old behavior, send empty response in error case]
[v6: rename legacy* vars to include version suffix]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
`filters.ToParam()` and `filters.FromParam()` were deprecated in favor of
`filters.ToJSON()` and `filters.FromJSON()` in 065118390a,
but still used in various locations.
This patch replaces uses of `filters.ToParam()` and `filters.FromParam()` with
`filters.ToJSON()` and `filters.FromJSON()`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch adds the untilRemoved option to the ContainerWait API which
allows the client to wait until the container is not only exited but
also removed.
This patch also adds some more CLI integration tests for waiting for a
created container and waiting with the new --until-removed flag.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Handle detach sequence in CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Update Container Wait Conditions
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Apply container wait changes to API 1.30
The set of changes to the containerWait API missed the cut for the
Docker 17.05 release (API version 1.29). This patch bumps the version
checks to use 1.30 instead.
This patch also makes a minor update to a testfile which was added to
the builder/dockerfile package.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Remove wait changes from CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address minor nits on wait changes
- Changed the name of the tty Proxy wrapper to `escapeProxy`
- Removed the unnecessary Error() method on container.State
- Fixes a typo in comment (repeated word)
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Use router.WithCancel in the containerWait handler
This handler previously added this functionality manually but now uses
the existing wrapper which does it for us.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Add WaitCondition constants to api/types/container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
- Update ContainerWait backend interface to not return pointer values
for container.StateStatus type.
- Updated container state's Wait() method comments to clarify that a
context MUST be used for cancelling the request, setting timeouts,
and to avoid goroutine leaks.
- Removed unnecessary buffering when making channels in the client's
ContainerWait methods.
- Renamed result and error channels in client's ContainerWait methods
to clarify that only a single result or error value would be sent
on the channel.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Move container.WaitCondition type to separate file
... to avoid conflict with swagger-generated code for API response
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This patch consolidates the two WaitStop and WaitWithContext methods
on the container.State type. Now there is a single method, Wait, which
takes a context and a bool specifying whether to wait for not just a
container exit but also removal.
The behavior has been changed slightly so that a wait call during a
Created state will not return immediately but instead wait for the
container to be started and then exited.
The interface has been changed to no longer block, but instead returns
a channel on which the caller can receive a *StateStatus value which
indicates the ExitCode or an error if there was one (like a context
timeout or state transition error).
These changes have been propagated through the rest of the deamon to
preserve all other existing behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This changes the long-standing bug of copy operations not preserving the
UID/GID information after the files arrive to the container.
Signed-off-by: Erik Hollensbe <github@hollensbe.org>
Refactor container logs system to make communicating log messages
internally much simpler. Move responsibility for marshalling log
messages into the REST server. Support TTY logs. Pave the way for fixing
the ambiguous bytestream format. Pave the way for fixing details.
Signed-off-by: Drew Erny <drew.erny@docker.com>
Previously, `docker logs` (and by extension, `docker service logs`) had
an error in the way they returned errors that occurred after a stream
had already been started. Specifically, the errors were added verbatim
to the HTTP response, which caused StdCopy to fail with an esoteric
error. This change updates StdCopy to accept errors from the source
stream and then return those errors when copying to the destination
stream.
Signed-off-by: Drew Erny <drew.erny@docker.com>
This fix tries to address the issue raised in 28176 where
text frame was used in websocket attach endpoint. In case
the data send out contains non utf8 data, the connection
will be closed in certain browsers, e.g., Safari.
This fix address the issue by change `PayloadType` to `BinaryFrame`.
This fix is tested manually with Safari. The docker daemon is inside a Linux Virtual Machine.
Create a container with:
```
docker run -itd --name websocket busybox sh -c "while true; do echo -e 'he\\xc3\\x28o'; sleep 5; done"
```
Use the following url (172.16.66.128:2375 is the tcp address of the daemon):
```
file:///websocket.html?url=ws://172.16.66.128:2375/v1.25/containers/websocket/attach/ws?logs=1&stderr=1&stdout=1&stream=1&stdin=1
```
and the following html:
```
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<title>Websocket</title>
<script type="text/javascript">
function DockerWebSocket() {
if ("WebSocket" in window) {
console.log("WebSocket is supported by Browser...")
// Remove '?url=' prefix
url = window.location.search.replace(/^(\?url=)/,"");
console.log("URL ["+url+"]...");
var ws = new WebSocket(url);
ws.onopen = function() {
console.log("Connection is opened...");
};
ws.onclose = function() {
console.log("Connection is closed...");
};
ws.onmessage = function (e) {
if (typeof e.data === "string") {
alert("WebSocket received text message ["+e.data+"]!")
} else {
console.log("Message is received...")
var blobReader = new FileReader();
blobReader.onload = function(event) {
console.log(JSON.stringify(blobReader.result))
};
blobReader.readAsText(e.data)
console.log("Message complete...")
}
};
} else {
alert("WebSocket is not supported by Browser!");
}
}
</script>
</head>
<body>
<div>
<a href="javascript:DockerWebSocket()">Run DockerWebSocket</a>
</div>
</body>
</html>
```
This fix fixes 28176.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Docker 1.13 moves the `--rm` flag to the daemon,
through an AutoRemove option in HostConfig.
When using API 1.24 and under, AutoRemove should not be
used, even if the daemon is version 1.13 or above and
"supports" this feature.
This patch fixes a situation where an 1.13 client,
talking to an 1.13 daemon, but using the 1.24 API
version, still set the AutoRemove property.
As a result, both the client _and_ the daemon
were attempting to remove the container, resulting
in an error:
ERRO[0000] error removing container: Error response from daemon:
removal of container ce0976ad22495c7cbe9487752ea32721a282164862db036b2f3377bd07461c3a
is already in progress
In addition, the validation of conflicting options
is moved from `docker run` to `opts.parse()`, so
that conflicting options are also detected when
running `docker create` and `docker start` separately.
To resolve the issue, the `AutoRemove` option is now
always set to `false` both by the client and the
daemon, if API version 1.24 or under is used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix convert DanglingOnly in ImagesPruneConfig to Filters,
so that it is possible to maintain API compatibility in the future.
Several integration tests have been added to cover changes.
This fix is related to 28497.
A follow up to this PR will be done once this PR is merged.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
