for the bridge driver.
Moves two config options, namely EnableIPTables and EnableUserlandProxy
from networks to the driver.
Closes#242
Signed-off-by: Mohammad Banikazemi <MBanikazemi@gmail.com>
The controller sandboxes hashmap is not being protected by a lock
while deleting it in `LeaveAll` call. This may result in a race
whereby any other read access that happens with the lock held is
also vulnerable to return random sandbox data which could result
in totally unpredictable behavior.
Also as part of the fix check if `s.endpoints` is empty and log an
error in `rmEndpoint` so that we don't bring down the process
for this unexpected error.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
For the moment in 1.7.1 since we provide a resolv.conf set api
to the driver honor that so that for host driver we can use the
the host's /etc/resolv.conf file as is rather than putting the
contents through a filtering logic.
It should be noted that the driver side capability to set the
resolv.conf file is most likely going to go away in the future
but this should be fine for 1.7.1
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Currently container can join one endpoint when it is started.
More endpoints can be attached at a later point in time. But
when that happens this attachment should only have meaning
only as long as the container is alive. The attachment should
lose it's meaning when the container goes away. Cuurently there
is no way for the container management code to tell libnetwork
to detach the container from all attached endpoints. This PR
provides an additional API `LeaveAll` which adds this
functionality,
To facilitate this and make the sanbox lifecycle consistent
some slight changes have been made to the behavior of sandbox
management code. The sandbox is no longer destroyed when the
last endpoint is detached from the container. Instead the sandbox
ie kept alive and can only be destroyed with a `LeaveAll` call.
This gives better control of sandbox lifecycle by the container
management code and the sandbox doesn't get destroyed from under
the carpet while the container is still using it.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The configuration format for docker runtime is based on daemon flags and
hence adjusting the libnetwork configuration to accomodate it by moving
the TOML based configuration to the dnet tool.
Also changed the controller configuration via options
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- The libnetwork test code had some issues in not properly
passing the network options. Fixed it.
- Made controller a global value so that every test uses the
same controller instance.
- Cleaned up endpoint and network objects after every test.
- Extended the endpoint join test case to test the same container
join two different networks using two different endpoints.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Now that Endpoint interface has the Info method there is no
need to return container data as a return value in the Join
method. Removed the return value and fixed all the callers.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Also unexporting configuration structures in bridge
- Changes in dnet/network.go to set bridge name = network name
Signed-off-by: Alessandro Boch <aboch@docker.com>
Currently the driver api allows the driver to specify the
full interface name for the interface inside the container.
This is not appropriate since the driver does not have the full
view of the sandbox to correcly allocate an unambiguous interface
name. Instead with this PR the driver will be allowed to specify
a prefix for the name and libnetwork and sandbox layers will
disambiguate it with an appropriate suffix.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
In essense, this just involves marshalling structs back and forth to a
remote process, via the plugin client. There are a couple of types
that don't JSONify well, notably `net.IPNet`, so there is some
translation to be done.
To conform to the driverapi interface, we must give the list of
endpoint interfaces to the remote process, and let it puzzle out what
it's supposed to do; including the possibility of returning an error.
The constraints on EndpointInfo are enforced by the remote driver
implementation; namely:
* It can't be nil
* If it's got non-empty Interfaces(), the remote process can't put
more in
In the latter case, or if we fail to add an interface for some
(future) reason, we try to roll the endpoint creation back. Likewise
for join -- if we fail to set the fields of the JoinInfo, we roll the
join back by leaving.
Signed-off-by: Michael Bridgen <mikeb@squaremobius.net>
- Package types to define the interfaces libnetwork errors
may implement, so that caller can categorize them.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This is need to decouple types from netutils which has linux
dependencies. This way the client code which needs network types
can just pull in types package which makes client code platform
agnostic.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The container's /etc/resolv.conf permission was getting setup
as 0600 while it should be 0644 for every user inside the
container to be able to read it. The tempfile that we create
initially to populate the resolvconf content is getting created
with 0600 mode. Changed it to 0644 once it is created since there
is noway to pass mode option to ioutil.Tempfile
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
There is a panic when two containers joining a host
network leave one after another. The problem was that
in controller.go the sandboxData was not stored as a
pointer reference. So when we got the data from the map
it was the copy of the data and refcnt increment was done
on that. Changed it to hold a reference. Also added a test
case to test it.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Refactored the driver api so that is aligns well with the design
of endpoint lifecycle becoming decoupled from the container lifecycle.
Introduced go interfaces to obtain address information during CreateEndpoint.
Go interfaces are also used to get data from driver during join.
This sort of deisgn hides the libnetwork specific type details from drivers.
Another adjustment is to provide a list of interfaces during CreateEndpoint. The
goal of this is many-fold:
* To indicate to the driver that IP address has been assigned by some other
entity (like a user wanting to use their own static IP for an endpoint/container)
and asking the driver to honor this. Driver may reject this configuration
and return an error but it may not try to allocate an IP address and override
the passed one.
* To indicate to the driver that IP address has already been allocated once
for this endpoint by an instance of the same driver in some docker host
in the cluster and this is merely a notification about that endpoint and the
allocated resources.
* In case the list of interfaces is empty the driver is required to allocate and
assign IP addresses for this endpoint.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
This commit brings in Remote driver integrated with the newly introduced
Plugin framework as a Docker Package.
The Plugin framework is designed as a Package and has no runtime
dependancy on Docker platform. It stands on its own and is a good
candidate for getting the remote drivers hooked to libnetwork
Signed-off-by: Madhu Venugopal <madhu@docker.com>
If resolvConfPath is unavailable and if the internally generated .hash file
is still present, then updateDNS should not consider the presence of internally
generated .hash. Rather, it must handle it as a case of using this
resolvConfPath for the first time.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
When an update is done to the container resolv.conf file
and it was inheriting host entries, then we should not
re-read the host entries when the container leaves and
re-joins the endpoint.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The libnetwork test does not need to run inside a namespace
when inside a container. This results in unpredictable behavior
when the sandbox code unlocks the go routine from the OS thread
while the test code still wants it locked in the OS thread. This
will result in unreachable interfaces when the go routine
migrates to a different OS thread.
Fixed by passing a special test flag which is only set to true
when the test is run inside a container.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
In the present code, each driver package provides a `New()` method
which constructs a driver of its type, which is then registered with
the controller.
However, this is not suitable for the `drivers/remote` package, since
it does not provide a (singleton) driver, but a mechanism for drivers
to be added dynamically. As a result, the implementation is oddly
dual-purpose, and a spurious `"remote"` driver is added to the
controller's list of available drivers.
Instead, it is better to provide the registration callback to each
package and let it register its own driver or drivers. That way, the
singleton driver packages can construct one and register it, and the
remote package can hook the callback up with whatever the dynamic
driver mechanism turns out to be.
NB there are some method signature changes; in particular to
controller.New, which can return an error if the built-in driver
packages fail to initialise.
Signed-off-by: Michael Bridgen <mikeb@squaremobius.net>
- Refactored the Join/Leave code so they are synchronized across multiple go-routines
- Added parallel test coverage to test mult-thread access to Join/Leave
- Updated sandbox code to revert back to caller namespace when removing interfaces
- Changed the netns path to /var/run/netns so the cleanup is simpler on machine
reboot scenario
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
container config.
- Added JoinOption processing for extra /etc/hosts record.
- Added support for updating /etc/hosts entries of other containers.
- Added sandbox support for adding a sandbox without the OS level create.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- libnetwork cares for list of exposed ports, driver cares
for list of port bindings. At endpoint creation:
- list of exposed ports will be passed as libnetwork otion
- list of port mapping will be passed as driver option
Signed-off-by: Alessandro Boch <aboch@docker.com>
* Modified NB API with self referential var-aarg for future proofing the APIs
* Modified Driver API's option parameter to be a Map of interface{}
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- Removed sandbox key argument for CreateEndpoint.
- Refactored bridge driver code to remove sandbox key.
- Fixed bridge driver code for gaps in ipv6 behavior
observed during docker integration.
- Updated test code, readme code, README.md according
api change.
- Fixed some sandbox issues while testing docker ipv6
integration.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
