When a container is left running after the daemon exits (e.g. the daemon
is SIGKILL'd or crashes), it should stop any running containers when the
daemon starts back up.
What actually happens is the daemon only sends the container's
configured stop signal and does not check if it has exited.
If the container does not actually exit then it is left running.
This fixes this unexpected behavior by calling the same function to shut
down the container that the daemon shutdown process does.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
* Requires containerd binaries from containerd/containerd#3799 . Metrics are unimplemented yet.
* Works with crun v0.10.4, but `--security-opt seccomp=unconfined` is needed unless using master version of libseccomp
( containers/crun#156, seccomp/libseccomp#177 )
* Doesn't work with master runc yet
* Resource limitations are unimplemented
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
WithBlock makes sure that the following containerd request is reliable.
In one edge case with high load pressure, kernel kills dockerd, containerd
and containerd-shims caused by OOM. When both dockerd and containerd
restart, but containerd will take time to recover all the existing
containers. Before containerd serving, dockerd will failed with gRPC
error. That bad thing is that restore action will still ignore the
any non-NotFound errors and returns running state for
already stopped container. It is unexpected behavior. And
we need to restart dockerd to make sure that anything is OK.
It is painful. Add WithBlock can prevent the edge case. And
n common case, the containerd will be serving in shortly.
It is not harm to add WithBlock for containerd connection.
Signed-off-by: Wei Fu <fuweid89@gmail.com>
Moby works perfectly when you are in a situation when one has a good and stable
internet connection. Operating in area's where internet connectivity is likely
to be lost in undetermined intervals, like a satellite connection or 4G/LTE in
rural area's, can become a problem when pulling a new image. When connection is
lost while image layers are being pulled, Moby will try to reconnect up to 5 times.
If this fails, the incompletely downloaded layers are lost will need to be completely
downloaded again during the next pull request. This means that we are using more
data than we might have to.
Pulling a layer multiple times from the start can become costly over a satellite
or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and
Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum
download attempts. The maximum download attempts is currently set at 5
(distribution/xfer/download.go). I would like to change this constant to a variable
that the user can set. The default will still be 5, so nothing will change from
the current version unless specified when starting the daemon with the added flag
or in the config file.
I added a default value of 5 for DefaultMaxDownloadAttempts and a settable
max-download-attempts in the daemon config file. It is also added to the config
of dockerd so it can be set with a flag when starting the daemon. This value gets
stored in the imageService of the daemon when it is initiated and can be passed
to the NewLayerDownloadManager as a parameter. It will be stored in the
LayerDownloadManager when initiated. This enables us to set the max amount of
retries in makeDownoadFunc equal to the max download attempts.
I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads.
You can pull this version and test in a development container. Either create a config
`file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use
`dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading
a container and disconnect from the internet whilst downloading. The result would
be that it stops pulling after three attempts.
Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
also renamed the non-windows variant of this file to be
consistent with other files in this package
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix was added in 8e71b1e210 to work around
a go issue (https://github.com/golang/go/issues/20506).
That issue was fixed in
66c03d39f3,
which is part of Go 1.10 and up. This reverts the changes that were made in
8e71b1e210, and are no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
This is needed so that we can add OS version constraints in Swarmkit, which
does require the engine to report its host's OS version (see
https://github.com/docker/swarmkit/issues/2770).
The OS version is parsed from the `os-release` file on Linux, and from the
`ReleaseId` string value of the `SOFTWARE\Microsoft\Windows NT\CurrentVersion`
registry key on Windows.
Added unit tests when possible, as well as Prometheus metrics.
Signed-off-by: Jean Rouge <rougej+github@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the first step in refactoring moby (dockerd) to use containerd on Windows.
Similar to the current model in Linux, this adds the option to enable it for runtime.
It does not switch the graphdriver to containerd snapshotters.
- Refactors libcontainerd to a series of subpackages so that either a
"local" containerd (1) or a "remote" (2) containerd can be loaded as opposed
to conditional compile as "local" for Windows and "remote" for Linux.
- Updates libcontainerd such that Windows has an option to allow the use of a
"remote" containerd. Here, it communicates over a named pipe using GRPC.
This is currently guarded behind the experimental flag, an environment variable,
and the providing of a pipename to connect to containerd.
- Infrastructure pieces such as under pkg/system to have helper functions for
determining whether containerd is being used.
(1) "local" containerd is what the daemon on Windows has used since inception.
It's not really containerd at all - it's simply local invocation of HCS APIs
directly in-process from the daemon through the Microsoft/hcsshim library.
(2) "remote" containerd is what docker on Linux uses for it's runtime. It means
that there is a separate containerd service running, and docker communicates over
GRPC to it.
To try this out, you will need to start with something like the following:
Window 1:
containerd --log-level debug
Window 2:
$env:DOCKER_WINDOWS_CONTAINERD=1
dockerd --experimental -D --containerd \\.\pipe\containerd-containerd
You will need the following binary from github.com/containerd/containerd in your path:
- containerd.exe
You will need the following binaries from github.com/Microsoft/hcsshim in your path:
- runhcs.exe
- containerd-shim-runhcs-v1.exe
For LCOW, it will require and initrd.img and kernel in `C:\Program Files\Linux Containers`.
This is no different to the current requirements. However, you may need updated binaries,
particularly initrd.img built from Microsoft/opengcs as (at the time of writing), Linuxkit
binaries are somewhat out of date.
Note that containerd and hcsshim for HCS v2 APIs do not yet support all the required
functionality needed for docker. This will come in time - this is a baby (although large)
step to migrating Docker on Windows to containerd.
Note that the HCS v2 APIs are only called on RS5+ builds. RS1..RS4 will still use
HCS v1 APIs as the v2 APIs were not fully developed enough on these builds to be usable.
This abstraction is done in HCSShim. (Referring specifically to runtime)
Note the LCOW graphdriver still uses HCS v1 APIs regardless.
Note also that this does not migrate docker to use containerd snapshotters
rather than graphdrivers. This needs to be done in conjunction with Linux also
doing the same switch.
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Please refer to `docs/rootless.md`.
TLDR:
* Make sure `/etc/subuid` and `/etc/subgid` contain the entry for you
* `dockerd-rootless.sh --experimental`
* `docker -H unix://$XDG_RUNTIME_DIR/docker.sock run ...`
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
`time.After` keeps a timer running until the specified duration is
completed. It also allocates a new timer on each call. This can wind up
leaving lots of uneccessary timers running in the background that are
not needed and consume resources.
Instead of `time.After`, use `time.NewTimer` so the timer can actually
be stopped.
In some of these cases it's not a big deal since the duraiton is really
short, but in others it is much worse.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix fixes go vet issue:
```
daemon/daemon.go:273: loop variable id captured by func literal
daemon/daemon.go:280: loop variable id captured by func literal
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Many startup tasks have to run for each container, and thus using a
WaitGroup (which doesn't have a limit to the number of parallel tasks)
can result in Docker exceeding the NOFILE limit quite trivially. A more
optimal solution is to have a parallelism limit by using a semaphore.
In addition, several startup tasks were not parallelised previously
which resulted in very long startup times. According to my testing, 20K
dead containers resulted in ~6 minute startup times (during which time
Docker is completely unusable).
This patch fixes both issues, and the parallelStartupTimes factor chosen
(128 * NumCPU) is based on my own significant testing of the 20K
container case. This patch (on my machines) reduces the startup time
from 6 minutes to less than a minute (ideally this could be further
reduced by removing the need to scan all dead containers on startup --
but that's beyond the scope of this patchset).
In order to avoid the NOFILE limit problem, we also detect this
on-startup and if NOFILE < 2*128*NumCPU we will reduce the parallelism
factor to avoid hitting NOFILE limits (but also emit a warning since
this is almost certainly a mis-configuration).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The v1.10 layout and the migrator was added in 2015 via #17924.
Although the migrator is not marked as "deprecated" explicitly in
cli/docs/deprecated.md, I suppose people should have already migrated
from pre-v1.10 and they no longer need the migrator, because pre-v1.10
version do not support schema2 images (and these versions no longer
receives security updates).
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This should eliminate a bunch of new (go-1.11 related) validation
errors telling that the code is not formatted with `gofmt -s`.
No functional change, just whitespace (i.e.
`git show --ignore-space-change` shows nothing).
Patch generated with:
> git ls-files | grep -v ^vendor/ | grep .go$ | xargs gofmt -s -w
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This implements chown support on Windows. Built-in accounts as well
as accounts included in the SAM database of the container are supported.
NOTE: IDPair is now named Identity and IDMappings is now named
IdentityMapping.
The following are valid examples:
ADD --chown=Guest . <some directory>
COPY --chown=Administrator . <some directory>
COPY --chown=Guests . <some directory>
COPY --chown=ContainerUser . <some directory>
On Windows an owner is only granted the permission to read the security
descriptor and read/write the discretionary access control list. This
fix also grants read/write and execute permissions to the owner.
Signed-off-by: Salahuddin Khan <salah@docker.com>
Adds a supervisor package for starting and monitoring containerd.
Separates grpc connection allowing access from daemon.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Handle the case of systemd-resolved, and if in place
use a different resolv.conf source.
Set appropriately the option on libnetwork.
Move unix specific code to container_operation_unix
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
In particular, these two:
> daemon/daemon_unix.go:1129: Wrapf format %v reads arg #1, but call has 0 args
> daemon/kill.go:111: Warn call has possible formatting directive %s
and a few more.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
