for windows all networks are re-populated in the store during network controller initialization. In current version it also regenerate network Ids which may be referenced by other components and it may cause broken references to a networks. This commit avoids regeneration of network ids.
Signed-off-by: Andrey Kolomentsev <andrey.kolomentsev@docker.com>
- Add support for exact list of capabilities, support only OCI model
- Support OCI model on CapAdd and CapDrop but remain backward compatibility
- Create variable locally instead of declaring it at the top
- Use const for magic "ALL" value
- Rename `cap` variable as it overlaps with `cap()` built-in
- Normalize and validate capabilities before use
- Move validation for conflicting options to validateHostConfig()
- TweakCapabilities: simplify logic to calculate capabilities
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`time.After` keeps a timer running until the specified duration is
completed. It also allocates a new timer on each call. This can wind up
leaving lots of uneccessary timers running in the background that are
not needed and consume resources.
Instead of `time.After`, use `time.NewTimer` so the timer can actually
be stopped.
In some of these cases it's not a big deal since the duraiton is really
short, but in others it is much worse.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When running a container in the host's network namespace, the container
gets a copy of the host's resolv.conf (copied to `/etc/resolv.conf` inside
the container).
The current code always used the default (`/etc/resolv.conf`) path on the
host, irregardless if `systemd-resolved` was used or not.
This patch uses the correct file if `systemd-resolved` was detected
to be running.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit fixes two possible crashes in the `*Daemon` bound method
`reloadMaxConcurrentDownloadsAndUploads()`.
The first fixed issue is when `daemon.imageService` is `nil`. The second
panic can occur if the provided `*config.Config` is incomplete and the
fields `conf.MaxConcurrentDownloads` or `conf.MaxConcurrentUploads` are
`nil`.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This fix fixes go vet issue:
```
daemon/daemon.go:273: loop variable id captured by func literal
daemon/daemon.go:280: loop variable id captured by func literal
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
CRIU supports checkpoint and restore of tty devices since version 2.12
which was released on 8th of March 2017. Support for this functionality
was implemented with opencontainers/runc@1c43d09 (checkpoint: add
support for containers with terminals) and containerd/containerd@60daa41
(Allow to checkpoint and restore a container with console).
Therefore, we can enable the support in moby/docker.
Signed-off-by: Radostin Stoyanov <rstoyanov1@gmail.com>
Adds the following validations to the syslog logger test:
1. Only supported options are valid
2. Log option syslog-address has to be a valid URI
3. Log option syslog-address if is file has to exist
4. Log option syslog-address if udp/tcp scheme, default to port 513
5. Log-option syslog-facility has to be a valid facility
6. Log-option syslog-format has to be a valid format
Signed-off-by: Joao Trindade <trindade.joao@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add awslogs-force-flush-interval-seconds and awslogs-max-buffered-events configurable options to aswlogs driver to replace hardcoded values of repsectively 5 seconds and 4K.
Signed-off-by: Maximiliano Maccanti <maccanti@amazon.com>
Many startup tasks have to run for each container, and thus using a
WaitGroup (which doesn't have a limit to the number of parallel tasks)
can result in Docker exceeding the NOFILE limit quite trivially. A more
optimal solution is to have a parallelism limit by using a semaphore.
In addition, several startup tasks were not parallelised previously
which resulted in very long startup times. According to my testing, 20K
dead containers resulted in ~6 minute startup times (during which time
Docker is completely unusable).
This patch fixes both issues, and the parallelStartupTimes factor chosen
(128 * NumCPU) is based on my own significant testing of the 20K
container case. This patch (on my machines) reduces the startup time
from 6 minutes to less than a minute (ideally this could be further
reduced by removing the need to scan all dead containers on startup --
but that's beyond the scope of this patchset).
In order to avoid the NOFILE limit problem, we also detect this
on-startup and if NOFILE < 2*128*NumCPU we will reduce the parallelism
factor to avoid hitting NOFILE limits (but also emit a warning since
this is almost certainly a mis-configuration).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Disabling the oom-killer for a container without setting a memory limit
is dangerous, as it can result in the container consuming unlimited memory,
without the kernel being able to kill it. A check for this situation is curently
done in the CLI, but other consumers of the API won't receive this warning.
This patch adds a check for this situation to the daemon, so that all consumers
of the API will receive this warning.
This patch will have one side-effect; docker cli's that also perform this check
client-side will print the warning twice; this can be addressed by disabling
the cli-side check for newer API versions, but will generate a bit of extra
noise when using an older CLI.
With this patch applied (and a cli that does not take the new warning into account);
```
docker create --oom-kill-disable busybox
WARNING: OOM killer is disabled for the container, but no memory limit is set, this can result in the system running out of resources.
669933b9b237fa27da699483b5cf15355a9027050825146587a0e5be0d848adf
docker run --rm --oom-kill-disable busybox
WARNING: Disabling the OOM killer on containers without setting a '-m/--memory' limit may be dangerous.
WARNING: OOM killer is disabled for the container, but no memory limit is set, this can result in the system running out of resources.
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The errors returned from Mount and Unmount functions are raw
syscall.Errno errors (like EPERM or EINVAL), which provides
no context about what has happened and why.
Similar to os.PathError type, introduce mount.Error type
with some context. The error messages will now look like this:
> mount /tmp/mount-tests/source:/tmp/mount-tests/target, flags: 0x1001: operation not permitted
or
> mount tmpfs:/tmp/mount-test-source-516297835: operation not permitted
Before this patch, it was just
> operation not permitted
[v2: add Cause()]
[v3: rename MountError to Error, document Cause()]
[v4: fixes; audited all users]
[v5: make Error type private; changes after @cpuguy83 reviews]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As standard mount.Unmount does what we need, let's use it.
In addition, this adds ignoring "not mounted" condition, which
was previously implemented (see PR#33329, commit cfa2591d3f)
via a very expensive call to mount.Mounted().
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This small fix renames `TestfillLicense` to `TestFillLicense`
as otherwise go vet reports:
```
$ go tool vet daemon/licensing_test.go
daemon/licensing_test.go:11: TestfillLicense has malformed name: first letter after 'Test' must not be lowercase
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
