The namespaces com.docker.*, io.docker.*, org.dockerproject.*
have been documented to be reserved for Docker's internal use.
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: Jintao Zhang <zhangjintao9020@gmail.com>
Dont assign the --bip value directly to the subnet
for the default bridge. Instead use the network value
from the ParseCIDR output
Addresses: https://github.com/moby/moby/issues/40392
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
This adds a new `fluentd-request-ack` logging option for the Fluentd
logging driver. If enabled, the server will respond with an acknowledgement.
This option improves the reliability of the message transmission. This
change is not versioned, and affects all API versions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This extracts parsing the driver's configuration to a
function, and uses the same function both when initializing
the driver, and when validating logging options.
Doing so allows validating if the provided options are in
the correct format when calling `ValidateOpts`, instead
of resulting in an error when initializing the logging driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`fuse-overlayfs` provides rootless overlayfs functionality without depending
on any kernel patch.
Aside from rootless, `fuse-overlayfs` could be potentially used for eliminating
`chown()` calls that happen in userns-remap mode, because `fuse-overlayfs` also
provides shiftfs functionality.
System requirements:
* fuse-overlayfs needs to be installed. Tested with 0.7.6.
* kernel >= 4.18
Unit test: `go test -exec sudo -v ./daemon/graphdriver/fuse-overlayfs`
The implementation is based on Podman's `overlay` driver which supports
both kernel-mode overlayfs and fuse-overlayfs in the single driver instance:
https://github.com/containers/storage/blob/39a8d5ed/drivers/overlay/overlay.go
However, Moby's implementation aims to decouple `fuse-overlayfs` driver from the
kernel-mode driver (`overlay2`) for simplicity.
Fix#40218
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Before the collection goroutine wakes up every 1 second (as configured).
This sleep interval is in case there are no stats to collect we don't
end up in a tight loop.
Instead use a condition variable to signal that a collection is needed.
This prevents us from waking the goroutine needlessly when there is no
one looking for stats.
For now I've kept the sleep just moved it to the end of the loop, which
gives some space between collections.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This makes sure that things like `--tmpfs` mounts over an anonymous
volume don't create volumes uneccessarily.
One method only checks mountpoints, the other checks both mountpoints
and tmpfs... the usage of these should likely be consolidated.
Ideally, processing for `--tmpfs` mounts would get merged in with the
rest of the mount parsing. I opted not to do that for this change so the
fix is minimal and can potentially be backported with fewer changes of
breaking things.
Merging the mount processing for tmpfs can be handled in a followup.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Docker Desktop (on MAC and Windows hosts) allows containers
running inside a Linux VM to connect to the host using
the host.docker.internal DNS name, which is implemented by
VPNkit (DNS proxy on the host)
This PR allows containers to connect to Linux hosts
by appending a special string "host-gateway" to --add-host
e.g. "--add-host=host.docker.internal:host-gateway" which adds
host.docker.internal DNS entry in /etc/hosts and maps it to host-gateway-ip
This PR also add a daemon flag call host-gateway-ip which defaults to
the default bridge IP
Docker Desktop will need to set this field to the Host Proxy IP
so DNS requests for host.docker.internal can be routed to VPNkit
Addresses: https://github.com/docker/for-linux/issues/264
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Adds support for ReplicatedJob and GlobalJob service modes. These modes
allow running service which execute tasks that exit upon success,
instead of daemon-type tasks.
Signed-off-by: Drew Erny <drew.erny@docker.com>
When IPv6 is enabled, make sure fixed-cidr-ipv6 is set
by the user since there is no default IPv6 local subnet
in the IPAM
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
If TINI_COMMIT isn't set, .go-autogen sets an empty value
as the "expected" commit. Attempting to truncate the value
caused a panic in that situation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Requires containerd binaries from containerd/containerd#3799 . Metrics are unimplemented yet.
* Works with crun v0.10.4, but `--security-opt seccomp=unconfined` is needed unless using master version of libseccomp
( containers/crun#156, seccomp/libseccomp#177 )
* Doesn't work with master runc yet
* Resource limitations are unimplemented
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
When a container is started in privileged mode, the device mappings
provided by `--device` flag was ignored. Now the device mappings will
be considered even in privileged mode.
Signed-off-by: Akhil Mohan <akhil.mohan@mayadata.io>
The [gelf payload specification](http://docs.graylog.org/en/2.4/pages/gelf.html#gelf-payload-specification)
demands that the field `short_message` *MUST* be set by the client library.
Since docker logging via the gelf driver sends messages line by line, it can happen that messages with an empty
`short_message` are passed on. This causes strict downstream processors (like graylog) to raise an exception.
The logger now skips messages with an empty line.
Resolves: #40232
See also: #37572
Signed-off-by: Jonas Heinrich <Jonas@JonasHeinrich.com>
Now that we do check if overlay is working by performing an actual
overlayfs mount, there's no need in extra checks for the kernel version
or the filesystem type. Actual mount check is sufficient.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Before this commit, overlay check was performed by looking for
`overlay` in /proc/filesystem. This obviously might not work
for rootless Docker (fs is there, but one can't use it as non-root).
This commit changes the check to perform the actual mount, by reusing
the code previously written to check for multiple lower dirs support.
The old check is removed from both drivers, as well as the additional
check for the multiple lower dirs support in overlay2 since it's now
a part of the main check.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This moves supportsMultipleLowerDir() to overlayutils
so it can be used from both overlay and overlay2.
The only changes made were:
* replace logger with logrus
* don't use workDirName mergedDirName constants
* add mnt var to improve readability a bit
This is a preparation for the next commit.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This fix tries to address the issue raised in 39353 where
docker crash when creating namespaces with UID in /etc/subuid and /etc/subgid.
The issue was that, mapping to `/etc/sub[u,g]id` in docker does not
allow numeric ID.
This fix fixes the issue by probing other combinations (uid:groupname, username:gid, uid:gid)
when normal username:groupname fails.
This fix fixes 39353.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
