Remove packaging scripts

These scripts have not been used for a while now, and should not be used again
because they are for releasing docker, not moby

Signed-off-by: Daniel Nephin <dnephin@docker.com>

hack/make/.build-deb/compat

@@ -1 +0,0 @@
-9

hack/make/.build-deb/control

@@ -1,29 +0,0 @@
-Source: docker-engine
-Section: admin
-Priority: optional
-Maintainer: Docker <support@docker.com>
-Standards-Version: 3.9.6
-Homepage: https://dockerproject.org
-Vcs-Browser: https://github.com/docker/docker
-Vcs-Git: git://github.com/docker/docker.git
-
-Package: docker-engine
-Architecture: linux-any
-Depends: iptables, ${misc:Depends}, ${perl:Depends}, ${shlibs:Depends}
-Recommends: aufs-tools,
-            ca-certificates,
-            cgroupfs-mount | cgroup-lite,
-            git,
-            xz-utils,
-            ${apparmor:Recommends}
-Conflicts: docker (<< 1.5~), docker.io, lxc-docker, lxc-docker-virtual-package, docker-engine-cs
-Description: Docker: the open-source application container engine
- Docker is an open source project to build, ship and run any application as a
- lightweight container
- .
- Docker containers are both hardware-agnostic and platform-agnostic. This means
- they can run anywhere, from your laptop to the largest EC2 compute instance and
- everything in between - and they don't require you to use a particular
- language, framework or packaging system. That makes them great building blocks
- for deploying and scaling web apps, databases, and backend services without
- depending on a particular stack or provider.

hack/make/.build-deb/docker-engine.bash-completion

@@ -1 +0,0 @@
-contrib/completion/bash/docker

hack/make/.build-deb/docker-engine.docker.default

@@ -1 +0,0 @@
-../../../contrib/init/sysvinit-debian/docker.default

hack/make/.build-deb/docker-engine.docker.init

@@ -1 +0,0 @@
-../../../contrib/init/sysvinit-debian/docker

hack/make/.build-deb/docker-engine.docker.upstart

@@ -1 +0,0 @@
-../../../contrib/init/upstart/docker.conf

hack/make/.build-deb/docker-engine.install

@@ -1,12 +0,0 @@
-#contrib/syntax/vim/doc/* /usr/share/vim/vimfiles/doc/
-#contrib/syntax/vim/ftdetect/* /usr/share/vim/vimfiles/ftdetect/
-#contrib/syntax/vim/syntax/* /usr/share/vim/vimfiles/syntax/
-contrib/*-integration usr/share/docker-engine/contrib/
-contrib/check-config.sh usr/share/docker-engine/contrib/
-contrib/completion/fish/docker.fish usr/share/fish/vendor_completions.d/
-contrib/completion/zsh/_docker usr/share/zsh/vendor-completions/
-contrib/init/systemd/docker.service lib/systemd/system/
-contrib/init/systemd/docker.socket lib/systemd/system/
-contrib/mk* usr/share/docker-engine/contrib/
-contrib/nuke-graph-directory.sh usr/share/docker-engine/contrib/
-contrib/syntax/nano/Dockerfile.nanorc usr/share/nano/

hack/make/.build-deb/docker-engine.manpages

@@ -1 +0,0 @@
-man/man*/*

hack/make/.build-deb/docker-engine.postinst

@@ -1,20 +0,0 @@
-#!/bin/sh
-set -e
-
-case "$1" in
-	configure)
-		if [ -z "$2" ]; then
-			if ! getent group docker > /dev/null; then
-				groupadd --system docker
-			fi
-		fi
-		;;
-	abort-*)
-		# How'd we get here??
-		exit 1
-		;;
-	*)
-		;;
-esac
-
-#DEBHELPER#

hack/make/.build-deb/docker-engine.udev

@@ -1 +0,0 @@
-../../../contrib/udev/80-docker.rules

hack/make/.build-deb/docs

@@ -1 +0,0 @@
-README.md

hack/make/.build-deb/rules

@@ -1,53 +0,0 @@
-#!/usr/bin/make -f
-
-VERSION = $(shell cat VERSION)
-SYSTEMD_VERSION := $(shell dpkg-query -W -f='$${Version}\n' systemd | cut -d- -f1)
-SYSTEMD_GT_227 := $(shell [ '$(SYSTEMD_VERSION)' ] && [ '$(SYSTEMD_VERSION)' -gt 227 ] && echo true )
-
-override_dh_gencontrol:
-	# if we're on Ubuntu, we need to Recommends: apparmor
-	echo 'apparmor:Recommends=$(shell dpkg-vendor --is Ubuntu && echo apparmor)' >> debian/docker-engine.substvars
-	dh_gencontrol
-
-override_dh_auto_build:
-	./hack/make.sh dynbinary
-	# ./man/md2man-all.sh runs outside the build container (if at all), since we don't have go-md2man here
-
-override_dh_auto_test:
-	./bundles/$(VERSION)/dynbinary-daemon/dockerd -v
-
-override_dh_strip:
-	# Go has lots of problems with stripping, so just don't
-
-override_dh_auto_install:
-	mkdir -p debian/docker-engine/usr/bin
-	cp -aT "$$(readlink -f bundles/$(VERSION)/dynbinary-daemon/dockerd)" debian/docker-engine/usr/bin/dockerd
-	cp -aT /usr/local/bin/docker-proxy debian/docker-engine/usr/bin/docker-proxy
-	cp -aT /usr/local/bin/docker-containerd debian/docker-engine/usr/bin/docker-containerd
-	cp -aT /usr/local/bin/docker-containerd-shim debian/docker-engine/usr/bin/docker-containerd-shim
-	cp -aT /usr/local/bin/docker-containerd-ctr debian/docker-engine/usr/bin/docker-containerd-ctr
-	cp -aT /usr/local/bin/docker-runc debian/docker-engine/usr/bin/docker-runc
-	cp -aT /usr/local/bin/docker-init debian/docker-engine/usr/bin/docker-init
-	mkdir -p debian/docker-engine/usr/lib/docker
-
-override_dh_installinit:
-	# use "docker" as our service name, not "docker-engine"
-	dh_installinit --name=docker
-ifeq (true, $(SYSTEMD_GT_227))
-	$(warning "Setting TasksMax=infinity")
-	sed -i -- 's/#TasksMax=infinity/TasksMax=infinity/' debian/docker-engine/lib/systemd/system/docker.service
-endif
-
-override_dh_installudev:
-	# match our existing priority
-	dh_installudev --priority=z80
-
-override_dh_install:
-	dh_install
-	dh_apparmor --profile-name=docker-engine -pdocker-engine
-
-override_dh_shlibdeps:
-	dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
-
-%:
-	dh $@ --with=bash-completion $(shell command -v dh_systemd_enable > /dev/null 2>&1 && echo --with=systemd)

hack/make/.build-rpm/docker-engine-selinux.spec

@@ -1,99 +0,0 @@
-# Some bits borrowed from the openstack-selinux package
-Name: docker-engine-selinux
-Version: %{_version}
-Release: %{_release}%{?dist}
-Summary: SELinux Policies for the open-source application container engine
-BuildArch: noarch
-Group: Tools/Docker
-
-License: GPLv2
-Source: %{name}.tar.gz
-
-URL: https://dockerproject.org
-Vendor: Docker
-Packager: Docker <support@docker.com>
-
-%global selinux_policyver 3.13.1-102
-%if 0%{?oraclelinux} >= 7
-%global selinux_policyver 3.13.1-102.0.3.el7_3.15
-%endif # oraclelinux 7
-%global selinuxtype targeted
-%global moduletype  services
-%global modulenames docker
-
-Requires(post): selinux-policy-base >= %{selinux_policyver}, selinux-policy-targeted >= %{selinux_policyver}, policycoreutils, policycoreutils-python libselinux-utils
-BuildRequires: selinux-policy selinux-policy-devel
-
-# conflicting packages
-Conflicts: docker-selinux
-
-# Usage: _format var format
-#   Expand 'modulenames' into various formats as needed
-#   Format must contain '$x' somewhere to do anything useful
-%global _format() export %1=""; for x in %{modulenames}; do %1+=%2; %1+=" "; done;
-
-# Relabel files
-%global relabel_files() \
-    /sbin/restorecon -R %{_bindir}/docker %{_localstatedir}/run/docker.sock %{_localstatedir}/run/docker.pid %{_sysconfdir}/docker %{_localstatedir}/log/docker %{_localstatedir}/log/lxc %{_localstatedir}/lock/lxc %{_usr}/lib/systemd/system/docker.service /root/.docker &> /dev/null || : \
-
-%description
-SELinux policy modules for use with Docker
-
-%prep
-%if 0%{?centos} <= 6
-%setup -n %{name}
-%else
-%autosetup -n %{name}
-%endif
-
-%build
-make SHARE="%{_datadir}" TARGETS="%{modulenames}"
-
-%install
-
-# Install SELinux interfaces
-%_format INTERFACES $x.if
-install -d %{buildroot}%{_datadir}/selinux/devel/include/%{moduletype}
-install -p -m 644 $INTERFACES %{buildroot}%{_datadir}/selinux/devel/include/%{moduletype}
-
-# Install policy modules
-%_format MODULES $x.pp.bz2
-install -d %{buildroot}%{_datadir}/selinux/packages
-install -m 0644 $MODULES %{buildroot}%{_datadir}/selinux/packages
-
-%post
-#
-# Install all modules in a single transaction
-#
-if [ $1 -eq 1 ]; then
-    %{_sbindir}/setsebool -P -N virt_use_nfs=1 virt_sandbox_use_all_caps=1
-fi
-%_format MODULES %{_datadir}/selinux/packages/$x.pp.bz2
-%{_sbindir}/semodule -n -s %{selinuxtype} -i $MODULES
-if %{_sbindir}/selinuxenabled ; then
-    %{_sbindir}/load_policy
-    %relabel_files
-    if [ $1 -eq 1 ]; then
-      restorecon -R %{_sharedstatedir}/docker
-    fi
-fi
-
-%postun
-if [ $1 -eq 0 ]; then
-    %{_sbindir}/semodule -n -r %{modulenames} &> /dev/null || :
-    if %{_sbindir}/selinuxenabled ; then
-        %{_sbindir}/load_policy
-        %relabel_files
-    fi
-fi
-
-%files
-%doc LICENSE
-%defattr(-,root,root,0755)
-%attr(0644,root,root) %{_datadir}/selinux/packages/*.pp.bz2
-%attr(0644,root,root) %{_datadir}/selinux/devel/include/%{moduletype}/*.if
-
-%changelog
-* Tue Dec 1 2015 Jessica Frazelle <acidburn@docker.com> 1.9.1-1
-- add licence to rpm
-- add selinux-policy and docker-engine-selinux rpm

hack/make/.build-rpm/docker-engine.spec

@@ -1,249 +0,0 @@
-Name: docker-engine
-Version: %{_version}
-Release: %{_release}%{?dist}
-Summary: The open-source application container engine
-Group: Tools/Docker
-
-License: ASL 2.0
-Source: %{name}.tar.gz
-
-URL: https://dockerproject.org
-Vendor: Docker
-Packager: Docker <support@docker.com>
-
-# is_systemd conditional
-%if 0%{?fedora} >= 21 || 0%{?centos} >= 7 || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1210
-%global is_systemd 1
-%endif
-
-# required packages for build
-# most are already in the container (see contrib/builder/rpm/ARCH/generate.sh)
-# only require systemd on those systems
-%if 0%{?is_systemd}
-%if 0%{?suse_version} >= 1210
-BuildRequires: systemd-rpm-macros
-%{?systemd_requires}
-%else
-%if 0%{?fedora} >= 25
-# Systemd 230 and up no longer have libsystemd-journal (see https://bugzilla.redhat.com/show_bug.cgi?id=1350301)
-BuildRequires: pkgconfig(systemd)
-Requires: systemd-units
-%else
-BuildRequires: pkgconfig(systemd)
-Requires: systemd-units
-BuildRequires: pkgconfig(libsystemd-journal)
-%endif
-%endif
-%else
-Requires(post): chkconfig
-Requires(preun): chkconfig
-# This is for /sbin/service
-Requires(preun): initscripts
-%endif
-
-# required packages on install
-Requires: /bin/sh
-Requires: iptables
-%if !0%{?suse_version}
-Requires: libcgroup
-%else
-Requires: libcgroup1
-%endif
-Requires: tar
-Requires: xz
-%if 0%{?fedora} >= 21 || 0%{?centos} >= 7 || 0%{?rhel} >= 7 || 0%{?oraclelinux} >= 7 || 0%{?amzn} >= 1
-# Resolves: rhbz#1165615
-Requires: device-mapper-libs >= 1.02.90-1
-%endif
-%if 0%{?oraclelinux} >= 6
-# Require Oracle Unbreakable Enterprise Kernel R4 and newer device-mapper
-Requires: kernel-uek >= 4.1
-Requires: device-mapper >= 1.02.90-2
-%endif
-
-# docker-selinux conditional
-%if 0%{?fedora} >= 20 || 0%{?centos} >= 7 || 0%{?rhel} >= 7 || 0%{?oraclelinux} >= 7
-%global with_selinux 1
-%endif
-
-# DWZ problem with multiple golang binary, see bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=995136#c12
-%if 0%{?fedora} >= 20 || 0%{?rhel} >= 7 || 0%{?oraclelinux} >= 7
-%global _dwz_low_mem_die_limit 0
-%endif
-
-# start if with_selinux
-%if 0%{?with_selinux}
-
-%if 0%{?centos} >= 7 || 0%{?rhel} >= 7 || 0%{?fedora} >= 25
-Requires: container-selinux >= 2.9
-%endif# centos 7, rhel 7, fedora 25
-
-%if 0%{?oraclelinux} >= 7
-%global selinux_policyver 3.13.1-102.0.3.el7_3.15
-%endif # oraclelinux 7
-%if 0%{?fedora} == 24
-%global selinux_policyver 3.13.1-191
-%endif # fedora 24 -- container-selinux on fedora24 does not properly set dockerd, for now just carry docker-engine-selinux for it
-%if 0%{?oraclelinux} >= 7 || 0%{?fedora} == 24
-Requires: selinux-policy >= %{selinux_policyver}
-Requires(pre): %{name}-selinux >= %{version}-%{release}
-%endif # selinux-policy for oraclelinux-7, fedora-24
-
-%endif # with_selinux
-
-# conflicting packages
-Conflicts: docker
-Conflicts: docker-io
-Conflicts: docker-engine-cs
-
-%description
-Docker is an open source project to build, ship and run any application as a
-lightweight container.
-
-Docker containers are both hardware-agnostic and platform-agnostic. This means
-they can run anywhere, from your laptop to the largest EC2 compute instance and
-everything in between - and they don't require you to use a particular
-language, framework or packaging system. That makes them great building blocks
-for deploying and scaling web apps, databases, and backend services without
-depending on a particular stack or provider.
-
-%prep
-%if 0%{?centos} <= 6 || 0%{?oraclelinux} <=6
-%setup -n %{name}
-%else
-%autosetup -n %{name}
-%endif
-
-%build
-export DOCKER_GITCOMMIT=%{_gitcommit}
-./hack/make.sh dynbinary
-# ./man/md2man-all.sh runs outside the build container (if at all), since we don't have go-md2man here
-
-%check
-./bundles/%{_origversion}/dynbinary-daemon/dockerd -v
-
-%install
-# install binary
-install -d $RPM_BUILD_ROOT/%{_bindir}
-install -p -m 755 bundles/%{_origversion}/dynbinary-daemon/dockerd-%{_origversion} $RPM_BUILD_ROOT/%{_bindir}/dockerd
-
-# install proxy
-install -p -m 755 /usr/local/bin/docker-proxy $RPM_BUILD_ROOT/%{_bindir}/docker-proxy
-
-# install containerd
-install -p -m 755 /usr/local/bin/docker-containerd $RPM_BUILD_ROOT/%{_bindir}/docker-containerd
-install -p -m 755 /usr/local/bin/docker-containerd-shim $RPM_BUILD_ROOT/%{_bindir}/docker-containerd-shim
-install -p -m 755 /usr/local/bin/docker-containerd-ctr $RPM_BUILD_ROOT/%{_bindir}/docker-containerd-ctr
-
-# install runc
-install -p -m 755 /usr/local/bin/docker-runc $RPM_BUILD_ROOT/%{_bindir}/docker-runc
-
-# install tini
-install -p -m 755 /usr/local/bin/docker-init $RPM_BUILD_ROOT/%{_bindir}/docker-init
-
-# install udev rules
-install -d $RPM_BUILD_ROOT/%{_sysconfdir}/udev/rules.d
-install -p -m 644 contrib/udev/80-docker.rules $RPM_BUILD_ROOT/%{_sysconfdir}/udev/rules.d/80-docker.rules
-
-# add init scripts
-install -d $RPM_BUILD_ROOT/etc/sysconfig
-install -d $RPM_BUILD_ROOT/%{_initddir}
-
-
-%if 0%{?is_systemd}
-install -d $RPM_BUILD_ROOT/%{_unitdir}
-install -p -m 644 contrib/init/systemd/docker.service.rpm $RPM_BUILD_ROOT/%{_unitdir}/docker.service
-%else
-install -p -m 644 contrib/init/sysvinit-redhat/docker.sysconfig $RPM_BUILD_ROOT/etc/sysconfig/docker
-install -p -m 755 contrib/init/sysvinit-redhat/docker $RPM_BUILD_ROOT/%{_initddir}/docker
-%endif
-# add bash, zsh, and fish completions
-install -d $RPM_BUILD_ROOT/usr/share/bash-completion/completions
-install -d $RPM_BUILD_ROOT/usr/share/zsh/vendor-completions
-install -d $RPM_BUILD_ROOT/usr/share/fish/vendor_completions.d
-install -p -m 644 contrib/completion/bash/docker $RPM_BUILD_ROOT/usr/share/bash-completion/completions/docker
-install -p -m 644 contrib/completion/zsh/_docker $RPM_BUILD_ROOT/usr/share/zsh/vendor-completions/_docker
-install -p -m 644 contrib/completion/fish/docker.fish $RPM_BUILD_ROOT/usr/share/fish/vendor_completions.d/docker.fish
-
-# install manpages
-install -d %{buildroot}%{_mandir}/man1
-install -p -m 644 man/man1/*.1 $RPM_BUILD_ROOT/%{_mandir}/man1
-install -d %{buildroot}%{_mandir}/man5
-install -p -m 644 man/man5/*.5 $RPM_BUILD_ROOT/%{_mandir}/man5
-install -d %{buildroot}%{_mandir}/man8
-install -p -m 644 man/man8/*.8 $RPM_BUILD_ROOT/%{_mandir}/man8
-
-# add vimfiles
-install -d $RPM_BUILD_ROOT/usr/share/vim/vimfiles/doc
-install -d $RPM_BUILD_ROOT/usr/share/vim/vimfiles/ftdetect
-install -d $RPM_BUILD_ROOT/usr/share/vim/vimfiles/syntax
-install -p -m 644 contrib/syntax/vim/doc/dockerfile.txt $RPM_BUILD_ROOT/usr/share/vim/vimfiles/doc/dockerfile.txt
-install -p -m 644 contrib/syntax/vim/ftdetect/dockerfile.vim $RPM_BUILD_ROOT/usr/share/vim/vimfiles/ftdetect/dockerfile.vim
-install -p -m 644 contrib/syntax/vim/syntax/dockerfile.vim $RPM_BUILD_ROOT/usr/share/vim/vimfiles/syntax/dockerfile.vim
-
-# add nano
-install -d $RPM_BUILD_ROOT/usr/share/nano
-install -p -m 644 contrib/syntax/nano/Dockerfile.nanorc $RPM_BUILD_ROOT/usr/share/nano/Dockerfile.nanorc
-
-# list files owned by the package here
-%files
-%doc AUTHORS CHANGELOG.md CONTRIBUTING.md LICENSE MAINTAINERS NOTICE README.md
-/%{_bindir}/docker
-/%{_bindir}/dockerd
-/%{_bindir}/docker-containerd
-/%{_bindir}/docker-containerd-shim
-/%{_bindir}/docker-containerd-ctr
-/%{_bindir}/docker-proxy
-/%{_bindir}/docker-runc
-/%{_bindir}/docker-init
-/%{_sysconfdir}/udev/rules.d/80-docker.rules
-%if 0%{?is_systemd}
-/%{_unitdir}/docker.service
-%else
-%config(noreplace,missingok) /etc/sysconfig/docker
-/%{_initddir}/docker
-%endif
-/usr/share/bash-completion/completions/docker
-/usr/share/zsh/vendor-completions/_docker
-/usr/share/fish/vendor_completions.d/docker.fish
-%doc
-/%{_mandir}/man1/*
-/%{_mandir}/man5/*
-/%{_mandir}/man8/*
-/usr/share/vim/vimfiles/doc/dockerfile.txt
-/usr/share/vim/vimfiles/ftdetect/dockerfile.vim
-/usr/share/vim/vimfiles/syntax/dockerfile.vim
-/usr/share/nano/Dockerfile.nanorc
-
-%post
-%if 0%{?is_systemd}
-%systemd_post docker
-%else
-# This adds the proper /etc/rc*.d links for the script
-/sbin/chkconfig --add docker
-%endif
-if ! getent group docker > /dev/null; then
-    groupadd --system docker
-fi
-
-%preun
-%if 0%{?is_systemd}
-%systemd_preun docker
-%else
-if [ $1 -eq 0 ] ; then
-    /sbin/service docker stop >/dev/null 2>&1
-    /sbin/chkconfig --del docker
-fi
-%endif
-
-%postun
-%if 0%{?is_systemd}
-%systemd_postun_with_restart docker
-%else
-if [ "$1" -ge "1" ] ; then
-    /sbin/service docker condrestart >/dev/null 2>&1 || :
-fi
-%endif
-
-%changelog

hack/make/build-deb

@@ -1,91 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# subshell so that we can export PATH and TZ without breaking other things
-(
-	export TZ=UTC # make sure our "date" variables are UTC-based
-	bundle .integration-daemon-start
-	bundle .detect-daemon-osarch
-
-	# TODO consider using frozen images for the dockercore/builder-deb tags
-
-	tilde='~' # ouch Bash 4.2 vs 4.3, you keel me
-	debVersion="${VERSION//-/$tilde}" # using \~ or '~' here works in 4.3, but not 4.2; just ~ causes $HOME to be inserted, hence the $tilde
-	# if we have a "-dev" suffix or have change in Git, let's make this package version more complex so it works better
-	if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-		gitUnix="$(git log -1 --pretty='%at')"
-		gitDate="$(date --date "@$gitUnix" +'%Y%m%d.%H%M%S')"
-		gitCommit="$(git log -1 --pretty='%h')"
-		gitVersion="git${gitDate}.0.${gitCommit}"
-		# gitVersion is now something like 'git20150128.112847.0.17e840a'
-		debVersion="$debVersion~$gitVersion"
-
-		# $ dpkg --compare-versions 1.5.0 gt 1.5.0~rc1 && echo true || echo false
-		# true
-		# $ dpkg --compare-versions 1.5.0~rc1 gt 1.5.0~git20150128.112847.17e840a && echo true || echo false
-		# true
-		# $ dpkg --compare-versions 1.5.0~git20150128.112847.17e840a gt 1.5.0~dev~git20150128.112847.17e840a && echo true || echo false
-		# true
-
-		# ie, 1.5.0 > 1.5.0~rc1 > 1.5.0~git20150128.112847.17e840a > 1.5.0~dev~git20150128.112847.17e840a
-	fi
-
-	debSource="$(awk -F ': ' '$1 == "Source" { print $2; exit }' hack/make/.build-deb/control)"
-	debMaintainer="$(awk -F ': ' '$1 == "Maintainer" { print $2; exit }' hack/make/.build-deb/control)"
-	debDate="$(date --rfc-2822)"
-
-	# if go-md2man is available, pre-generate the man pages
-	make manpages
-
-	builderDir="contrib/builder/deb/${PACKAGE_ARCH}"
-	pkgs=( $(find "${builderDir}/"*/ -type d) )
-	if [ ! -z "$DOCKER_BUILD_PKGS" ]; then
-		pkgs=()
-		for p in $DOCKER_BUILD_PKGS; do
-			pkgs+=( "$builderDir/$p" )
-		done
-	fi
-	for dir in "${pkgs[@]}"; do
-		[ -d "$dir" ] || { echo >&2 "skipping nonexistent $dir"; continue; }
-		version="$(basename "$dir")"
-		suite="${version##*-}"
-
-		image="dockercore/builder-deb:$version"
-		if ! docker inspect "$image" &> /dev/null; then
-			(
-				# Add the APT_MIRROR args only if the consuming Dockerfile uses it
-				# Otherwise this will cause the build to fail
-				if [ "$(grep 'ARG APT_MIRROR=' $dir/Dockerfile)" ] && [ "$BUILD_APT_MIRROR" ]; then
-					DOCKER_BUILD_ARGS="$DOCKER_BUILD_ARGS $BUILD_APT_MIRROR"
-				fi
-				set -x && docker build ${DOCKER_BUILD_ARGS} -t "$image" "$dir"
-			)
-		fi
-
-		mkdir -p "$DEST/$version"
-		cat > "$DEST/$version/Dockerfile.build" <<-EOF
-			FROM $image
-			WORKDIR /usr/src/docker
-			COPY . /usr/src/docker
-			ENV DOCKER_GITCOMMIT $GITCOMMIT
-			RUN mkdir -p /go/src/github.com/docker && mkdir -p /go/src/github.com/opencontainers \
-				&& ln -snf /usr/src/docker /go/src/github.com/docker/docker
-		EOF
-
-		cat >> "$DEST/$version/Dockerfile.build" <<-EOF
-			# Install runc, containerd, proxy and tini
-			RUN ./hack/dockerfile/install-binaries.sh runc-dynamic containerd-dynamic proxy-dynamic tini
-		EOF
-		cat >> "$DEST/$version/Dockerfile.build" <<-EOF
-			RUN cp -aL hack/make/.build-deb debian
-			RUN { echo '$debSource (${debVersion}-0~${version}) $suite; urgency=low'; echo; echo '  * Version: $VERSION'; echo; echo " -- $debMaintainer  $debDate"; } > debian/changelog && cat >&2 debian/changelog
-			RUN dpkg-buildpackage -uc -us -I.git
-		EOF
-		tempImage="docker-temp/build-deb:$version"
-		( set -x && docker build ${DOCKER_BUILD_ARGS} -t "$tempImage" -f "$DEST/$version/Dockerfile.build" . )
-		docker run --rm "$tempImage" bash -c 'cd .. && tar -c *_*' | tar -xvC "$DEST/$version"
-		docker rmi "$tempImage"
-	done
-
-	bundle .integration-daemon-stop
-) 2>&1 | tee -a "$DEST/test.log"

hack/make/build-rpm

@@ -1,148 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# subshell so that we can export PATH and TZ without breaking other things
-(
-	export TZ=UTC # make sure our "date" variables are UTC-based
-
-	source "$(dirname "$BASH_SOURCE")/.integration-daemon-start"
-	source "$(dirname "$BASH_SOURCE")/.detect-daemon-osarch"
-
-	# TODO consider using frozen images for the dockercore/builder-rpm tags
-
-	rpmName=docker-engine
-	rpmVersion="$VERSION"
-	rpmRelease=1
-
-	# rpmRelease versioning is as follows
-	# Docker 1.7.0:  version=1.7.0, release=1
-	# Docker 1.7.0-rc1: version=1.7.0, release=0.1.rc1
-	# Docker 1.7.0-cs1: version=1.7.0.cs1, release=1
-	# Docker 1.7.0-cs1-rc1: version=1.7.0.cs1, release=0.1.rc1
-	# Docker 1.7.0-dev nightly: version=1.7.0, release=0.0.YYYYMMDD.HHMMSS.gitHASH
-
-	# if we have a "-rc*" suffix, set appropriate release
-	if [[ "$rpmVersion" =~ .*-rc[0-9]+$ ]] ; then
-		rcVersion=${rpmVersion#*-rc}
-		rpmVersion=${rpmVersion%-rc*}
-		rpmRelease="0.${rcVersion}.rc${rcVersion}"
-	fi
-
-	DOCKER_GITCOMMIT=$(git rev-parse --short HEAD)
-	if [ -n "$(git status --porcelain --untracked-files=no)" ]; then
-		DOCKER_GITCOMMIT="$DOCKER_GITCOMMIT-unsupported"
-	fi
-
-	# if we have a "-dev" suffix or have change in Git, let's make this package version more complex so it works better
-	if [[ "$rpmVersion" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-		gitUnix="$(git log -1 --pretty='%at')"
-		gitDate="$(date --date "@$gitUnix" +'%Y%m%d.%H%M%S')"
-		gitCommit="$(git log -1 --pretty='%h')"
-		gitVersion="${gitDate}.git${gitCommit}"
-		# gitVersion is now something like '20150128.112847.17e840a'
-		rpmVersion="${rpmVersion%-dev}"
-		rpmRelease="0.0.$gitVersion"
-	fi
-
-	# Replace any other dashes with periods
-	rpmVersion="${rpmVersion/-/.}"
-
-	rpmPackager="$(awk -F ': ' '$1 == "Packager" { print $2; exit }' hack/make/.build-rpm/${rpmName}.spec)"
-	rpmDate="$(date +'%a %b %d %Y')"
-
-	# if go-md2man is available, pre-generate the man pages
-	make manpages
-
-	# Convert the CHANGELOG.md file into RPM changelog format
-	rm -f contrib/builder/rpm/${PACKAGE_ARCH}/changelog
-	VERSION_REGEX="^\W\W (.*) \((.*)\)$"
-	ENTRY_REGEX="^[-+*] (.*)$"
-	while read -r line || [[ -n "$line" ]]; do
-		if [ -z "$line" ]; then continue; fi
-		if [[ "$line" =~ $VERSION_REGEX ]]; then
-			echo >> contrib/builder/rpm/${PACKAGE_ARCH}/changelog
-			echo "* `date -d ${BASH_REMATCH[2]} '+%a %b %d %Y'` ${rpmPackager} - ${BASH_REMATCH[1]}" >> contrib/builder/rpm/${PACKAGE_ARCH}/changelog
-		fi
-		if [[ "$line" =~ $ENTRY_REGEX ]]; then
-			echo "- ${BASH_REMATCH[1]//\`}" >> contrib/builder/rpm/${PACKAGE_ARCH}/changelog
-		fi
-	done < CHANGELOG.md
-
-	builderDir="contrib/builder/rpm/${PACKAGE_ARCH}"
-	pkgs=( $(find "${builderDir}/"*/ -type d) )
-	if [ ! -z "$DOCKER_BUILD_PKGS" ]; then
-		pkgs=()
-		for p in $DOCKER_BUILD_PKGS; do
-			pkgs+=( "$builderDir/$p" )
-		done
-	fi
-	for dir in "${pkgs[@]}"; do
-		[ -d "$dir" ] || { echo >&2 "skipping nonexistent $dir"; continue; }
-		version="$(basename "$dir")"
-		suite="${version##*-}"
-
-		image="dockercore/builder-rpm:$version"
-		if ! docker inspect "$image" &> /dev/null; then
-			( set -x && docker build ${DOCKER_BUILD_ARGS} -t "$image" "$dir" )
-		fi
-
-		mkdir -p "$DEST/$version"
-		cat > "$DEST/$version/Dockerfile.build" <<-EOF
-			FROM $image
-			COPY . /usr/src/${rpmName}
-			WORKDIR /usr/src/${rpmName}
-			RUN mkdir -p /go/src/github.com/docker && mkdir -p /go/src/github.com/opencontainers
-		EOF
-
-		cat >> "$DEST/$version/Dockerfile.build" <<-EOF
-			# Install runc, containerd, proxy and tini
-			RUN TMP_GOPATH="/go" ./hack/dockerfile/install-binaries.sh runc-dynamic containerd-dynamic proxy-dynamic tini
-		EOF
-		if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-			echo 'ENV DOCKER_EXPERIMENTAL 1' >> "$DEST/$version/Dockerfile.build"
-		fi
-		cat >> "$DEST/$version/Dockerfile.build" <<-EOF
-			RUN mkdir -p /root/rpmbuild/SOURCES \
-				&& echo '%_topdir /root/rpmbuild' > /root/.rpmmacros
-			WORKDIR /root/rpmbuild
-			RUN ln -sfv /usr/src/${rpmName}/hack/make/.build-rpm SPECS
-			WORKDIR /root/rpmbuild/SPECS
-			RUN tar --exclude .git -r -C /usr/src -f /root/rpmbuild/SOURCES/${rpmName}.tar ${rpmName}
-			RUN tar --exclude .git -r -C /go/src/github.com/docker -f /root/rpmbuild/SOURCES/${rpmName}.tar containerd
-			RUN tar --exclude .git -r -C /go/src/github.com/docker/libnetwork/cmd -f /root/rpmbuild/SOURCES/${rpmName}.tar proxy
-			RUN tar --exclude .git -r -C /go/src/github.com/opencontainers -f /root/rpmbuild/SOURCES/${rpmName}.tar runc
-			RUN tar --exclude .git -r -C /go/ -f /root/rpmbuild/SOURCES/${rpmName}.tar tini
-			RUN gzip /root/rpmbuild/SOURCES/${rpmName}.tar
-			RUN { cat /usr/src/${rpmName}/contrib/builder/rpm/${PACKAGE_ARCH}/changelog; } >> ${rpmName}.spec && tail >&2 ${rpmName}.spec
-			RUN rpmbuild -ba \
-				--define '_gitcommit $DOCKER_GITCOMMIT' \
-				--define '_release $rpmRelease' \
-				--define '_version $rpmVersion' \
-				--define '_origversion $VERSION' \
-				--define '_experimental ${DOCKER_EXPERIMENTAL:-0}' \
-				${rpmName}.spec
-		EOF
-		# selinux policy referencing systemd things won't work on non-systemd versions
-		# of centos or rhel, which we don't support anyways
-		if [ "${suite%.*}" -gt 6 ] && [[ "$version" != opensuse* ]]; then
-			if [ -d "./contrib/selinux-$version" ]; then
-				selinuxDir="selinux-${version}"
-				cat >> "$DEST/$version/Dockerfile.build" <<-EOF
-					RUN tar -cz -C /usr/src/${rpmName}/contrib/${selinuxDir} -f /root/rpmbuild/SOURCES/${rpmName}-selinux.tar.gz ${rpmName}-selinux
-					RUN rpmbuild -ba \
-							--define '_gitcommit $DOCKER_GITCOMMIT' \
-							--define '_release $rpmRelease' \
-							--define '_version $rpmVersion' \
-							--define '_origversion $VERSION' \
-							${rpmName}-selinux.spec
-				EOF
-			fi
-		fi
-		tempImage="docker-temp/build-rpm:$version"
-		( set -x && docker build ${DOCKER_BUILD_ARGS} -t "$tempImage" -f $DEST/$version/Dockerfile.build . )
-		docker run --rm "$tempImage" bash -c 'cd /root/rpmbuild && tar -c *RPMS' | tar -xvC "$DEST/$version"
-		docker rmi "$tempImage"
-	done
-
-	source "$(dirname "$BASH_SOURCE")/.integration-daemon-stop"
-) 2>&1 | tee -a $DEST/test.log

hack/make/clean-apt-repo

@@ -1,43 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script cleans the experimental pool for the apt repo.
-# This is useful when there are a lot of old experimental debs and you only want to keep the most recent.
-#
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-APTDIR=$DOCKER_RELEASE_DIR/apt/repo/pool/experimental
-: ${DOCKER_ARCHIVE_DIR:=$DEST/archive}
-DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-
-latest_versions=$(dpkg-scanpackages "$APTDIR" /dev/null 2>/dev/null | awk -F ': ' '$1 == "Filename" { print $2 }')
-
-# get the latest version
-latest_docker_engine_file=$(echo "$latest_versions" | grep docker-engine)
-latest_docker_engine_version=$(basename ${latest_docker_engine_file%~*})
-
-echo "latest docker-engine version: $latest_docker_engine_version"
-
-# remove all the files that are not that version in experimental
-pool_dir=$(dirname "$latest_docker_engine_file")
-old_pkgs=( $(ls "$pool_dir" | grep -v "^${latest_docker_engine_version}" | grep "${latest_docker_engine_version%%~git*}") )
-
-echo "${old_pkgs[@]}"
-
-mkdir -p "$DOCKER_ARCHIVE_DIR"
-for old_pkg in "${old_pkgs[@]}"; do
-	echo "moving ${pool_dir}/${old_pkg} to $DOCKER_ARCHIVE_DIR"
-	mv "${pool_dir}/${old_pkg}" "$DOCKER_ARCHIVE_DIR"
-done
-
-echo
-echo "$pool_dir now has contents:"
-ls "$pool_dir"
-
-# now regenerate release files for experimental
-export COMPONENT=experimental
-source "${DIR}/update-apt-repo"
-
-echo "You will now want to: "
-echo "   - re-sign the repo with hack/make/sign-repo"
-echo "   - re-generate index files with hack/make/generate-index-listing"

hack/make/clean-yum-repo

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script cleans the experimental pool for the yum repo.
-# This is useful when there are a lot of old experimental rpms and you only want to keep the most recent.
-#
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-YUMDIR=$DOCKER_RELEASE_DIR/yum/repo/experimental
-
-suites=( $(find "$YUMDIR" -mindepth 1 -maxdepth 1 -type d) )
-
-for suite in "${suites[@]}"; do
-	echo "cleanup in: $suite"
-	( set -x; repomanage -k2 --old "$suite" | xargs rm -f )
-done
-
-echo "You will now want to: "
-echo "   - re-sign the repo with hack/make/sign-repo"
-echo "   - re-generate index files with hack/make/generate-index-listing"

hack/make/cover

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-bundle_cover() {
-	coverprofiles=( "$DEST/../"*"/coverprofiles/"* )
-	for p in "${coverprofiles[@]}"; do
-		echo
-		(
-			set -x
-			go tool cover -func="$p"
-		)
-	done
-}
-
-bundle_cover 2>&1 | tee "$DEST/report.log"

hack/make/generate-index-listing

@@ -1,74 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script generates index files for the directory structure
-# of the apt and yum repos
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-APTDIR=$DOCKER_RELEASE_DIR/apt
-YUMDIR=$DOCKER_RELEASE_DIR/yum
-
-if [ ! -d $APTDIR ] && [ ! -d $YUMDIR ]; then
-	echo >&2 'release-rpm or release-deb must be run before generate-index-listing'
-	exit 1
-fi
-
-create_index() {
-	local directory=$1
-	local original=$2
-	local cleaned=${directory#$original}
-
-	# the index file to create
-	local index_file="${directory}/index"
-
-	# cd into dir & touch the index file
-	cd $directory
-	touch $index_file
-
-	# print the html header
-	cat <<-EOF > "$index_file"
-	<!DOCTYPE html>
-	<html>
-	<head><title>Index of ${cleaned}/</title></head>
-	<body bgcolor="white">
-	<h1>Index of ${cleaned}/</h1><hr>
-	<pre><a href="../">../</a>
-	EOF
-
-	# start of content output
-	(
-	# change IFS locally within subshell so the for loop saves line correctly to L var
-	IFS=$'\n';
-
-	# pretty sweet, will mimic the normal apache output. skipping "index" and hidden files
-	for L in $(find -L . -mount -depth -maxdepth 1 -type f ! -name 'index' ! -name '.*' -prune -printf "<a href=\"%f\">%f|@_@%Td-%Tb-%TY %Tk:%TM  @%f@\n"|sort|column -t -s '|' | sed 's,\([\ ]\+\)@_@,</a>\1,g');
-	do
-		# file
-		F=$(sed -e 's,^.*@\([^@]\+\)@.*$,\1,g'<<<"$L");
-
-		# file with file size
-		F=$(du -bh $F | cut -f1);
-
-		# output with correct format
-		sed -e 's,\ @.*$, '"$F"',g'<<<"$L";
-	done;
-	) >> $index_file;
-
-	# now output a list of all directories in this dir (maxdepth 1) other than '.' outputting in a sorted manner exactly like apache
-	find -L . -mount -depth -maxdepth 1 -type d ! -name '.' -printf "<a href=\"%f\">%-43f@_@%Td-%Tb-%TY %Tk:%TM  -\n"|sort -d|sed 's,\([\ ]\+\)@_@,/</a>\1,g' >> $index_file
-
-	# print the footer html
-	echo "</pre><hr></body></html>" >> $index_file
-
-}
-
-get_dirs() {
-	local directory=$1
-
-	for d in `find ${directory} -type d`; do
-		create_index $d $directory
-	done
-}
-
-get_dirs $APTDIR
-get_dirs $YUMDIR

hack/make/install-binary

@@ -3,6 +3,27 @@
 set -e
 rm -rf "$DEST"
 
+install_binary() {
+	local file="$1"
+	local target="${DOCKER_MAKE_INSTALL_PREFIX:=/usr/local}/bin/"
+	if [ "$(go env GOOS)" == "linux" ]; then
+		echo "Installing $(basename $file) to ${target}"
+		mkdir -p "$target"
+		cp -f -L "$file" "$target"
+	else
+		echo "Install is only supported on linux"
+		return 1
+	fi
+}
+
 (
-	source "${MAKEDIR}/install-binary-daemon"
+	DEST="$(dirname $DEST)/binary-daemon"
+	source "${MAKEDIR}/.binary-setup"
+	install_binary "${DEST}/${DOCKER_DAEMON_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_RUNC_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_CONTAINERD_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_CONTAINERD_CTR_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_CONTAINERD_SHIM_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_PROXY_BINARY_NAME}"
+	install_binary "${DEST}/${DOCKER_INIT_BINARY_NAME}"
 )

hack/make/install-binary-daemon

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-rm -rf "$DEST"
-
-install_binary() {
-	local file="$1"
-	local target="${DOCKER_MAKE_INSTALL_PREFIX:=/usr/local}/bin/"
-	if [ "$(go env GOOS)" == "linux" ]; then
-		echo "Installing $(basename $file) to ${target}"
-		mkdir -p "$target"
-		cp -f -L "$file" "$target"
-	else
-		echo "Install is only supported on linux"
-		return 1
-	fi
-}
-
-(
-	DEST="$(dirname $DEST)/binary-daemon"
-	source "${MAKEDIR}/.binary-setup"
-	install_binary "${DEST}/${DOCKER_DAEMON_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_RUNC_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_CONTAINERD_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_CONTAINERD_CTR_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_CONTAINERD_SHIM_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_PROXY_BINARY_NAME}"
-	install_binary "${DEST}/${DOCKER_INIT_BINARY_NAME}"
-)

hack/make/release-deb

@@ -1,163 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script creates the apt repos for the .deb files generated by hack/make/build-deb
-#
-# The following can then be used as apt sources:
-# 	deb http://apt.dockerproject.org/repo $distro-$release $version
-#
-# For example:
-#	deb http://apt.dockerproject.org/repo ubuntu-trusty main
-#	deb http://apt.dockerproject.org/repo ubuntu-trusty testing
-#	deb http://apt.dockerproject.org/repo debian-wheezy experimental
-#	deb http://apt.dockerproject.org/repo debian-jessie main
-#
-# ... and so on and so forth for the builds created by hack/make/build-deb
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-: ${GPG_KEYID:=releasedocker}
-APTDIR=$DOCKER_RELEASE_DIR/apt/repo
-
-# setup the apt repo (if it does not exist)
-mkdir -p "$APTDIR/conf" "$APTDIR/db" "$APTDIR/dists"
-
-# supported arches/sections
-arches=( amd64 i386 armhf ppc64le s390x )
-
-# Preserve existing components but don't add any non-existing ones
-for component in main testing experimental ; do
-	exists=$(find "$APTDIR/dists" -mindepth 2 -maxdepth 2 -type d -name "$component" -print -quit)
-	if [ -n "$exists" ] ; then
-		components+=( $component )
-	fi
-done
-
-# set the component for the version being released
-component="main"
-
-if [[ "$VERSION" == *-rc* ]]; then
-	component="testing"
-fi
-
-if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-	component="experimental"
-fi
-
-# Make sure our component is in the list of components
-if [[ ! "${components[*]}" =~ $component ]] ; then
-	components+=( $component )
-fi
-
-# create apt-ftparchive file on every run. This is essential to avoid
-# using stale versions of the config file that could cause unnecessary
-# refreshing of bits for EOL-ed releases.
-cat <<-EOF > "$APTDIR/conf/apt-ftparchive.conf"
-Dir {
-	ArchiveDir "${APTDIR}";
-	CacheDir "${APTDIR}/db";
-};
-
-Default {
-	Packages::Compress ". gzip bzip2";
-	Sources::Compress ". gzip bzip2";
-	Contents::Compress ". gzip bzip2";
-};
-
-TreeDefault {
-	BinCacheDB "packages-\$(SECTION)-\$(ARCH).db";
-	Directory "pool/\$(SECTION)";
-	Packages "\$(DIST)/\$(SECTION)/binary-\$(ARCH)/Packages";
-	SrcDirectory "pool/\$(SECTION)";
-	Sources "\$(DIST)/\$(SECTION)/source/Sources";
-	Contents "\$(DIST)/\$(SECTION)/Contents-\$(ARCH)";
-	FileList "$APTDIR/\$(DIST)/\$(SECTION)/filelist";
-};
-EOF
-
-for dir in bundles/$VERSION/build-deb/*/; do
-	version="$(basename "$dir")"
-	suite="${version//debootstrap-}"
-
-	cat <<-EOF
-	Tree "dists/${suite}" {
-		Sections "${components[*]}";
-		Architectures "${arches[*]}";
-	}
-
-	EOF
-done >> "$APTDIR/conf/apt-ftparchive.conf"
-
-cat <<-EOF > "$APTDIR/conf/docker-engine-release.conf"
-APT::FTPArchive::Release::Origin "Docker";
-APT::FTPArchive::Release::Components "${components[*]}";
-APT::FTPArchive::Release::Label "Docker APT Repository";
-APT::FTPArchive::Release::Architectures "${arches[*]}";
-EOF
-
-# release the debs
-for dir in bundles/$VERSION/build-deb/*/; do
-	version="$(basename "$dir")"
-	codename="${version//debootstrap-}"
-
-	tempdir="$(mktemp -d /tmp/tmp-docker-release-deb.XXXXXXXX)"
-	DEBFILE=( "$dir/docker-engine"*.deb )
-
-	# add the deb for each component for the distro version into the
-	# pool (if it is not there already)
-	mkdir -p "$APTDIR/pool/$component/d/docker-engine/"
- 	for deb in ${DEBFILE[@]}; do
-		d=$(basename "$deb")
-		# We do not want to generate a new deb if it has already been
-		# copied into the APTDIR
-		if [ ! -f "$APTDIR/pool/$component/d/docker-engine/$d" ]; then
-			cp "$deb" "$tempdir/"
-			# if we have a $GPG_PASSPHRASE we may as well
-			# dpkg-sign before copying the deb into the pool
-			if [ ! -z "$GPG_PASSPHRASE" ]; then
-				dpkg-sig -g "--no-tty  --digest-algo 'sha512' --passphrase '$GPG_PASSPHRASE'" \
-					-k "$GPG_KEYID" --sign builder "$tempdir/$d"
-			fi
-			mv "$tempdir/$d" "$APTDIR/pool/$component/d/docker-engine/"
-		fi
-	done
-
-	rm -rf "$tempdir"
-
-	# build the right directory structure, needed for apt-ftparchive
-	for arch in "${arches[@]}"; do
-		for c in "${components[@]}"; do
-			mkdir -p "$APTDIR/dists/$codename/$c/binary-$arch"
-		done
-	done
-
-	# update the filelist for this codename/component
-	find "$APTDIR/pool/$component" \
-		-name *~${codename}*.deb -o \
-		-name *~${codename#*-}*.deb > "$APTDIR/dists/$codename/$component/filelist"
-done
-
-# run the apt-ftparchive commands so we can have pinning
-apt-ftparchive generate "$APTDIR/conf/apt-ftparchive.conf"
-
-for dir in bundles/$VERSION/build-deb/*/; do
-	version="$(basename "$dir")"
-	codename="${version//debootstrap-}"
-
-	apt-ftparchive \
-		-c "$APTDIR/conf/docker-engine-release.conf" \
-		-o "APT::FTPArchive::Release::Codename=$codename" \
-		-o "APT::FTPArchive::Release::Suite=$codename" \
-		release \
-		"$APTDIR/dists/$codename" > "$APTDIR/dists/$codename/Release"
-
-	for arch in "${arches[@]}"; do
-		apt-ftparchive \
-			-c "$APTDIR/conf/docker-engine-release.conf" \
-			-o "APT::FTPArchive::Release::Codename=$codename" \
-			-o "APT::FTPArchive::Release::Suite=$codename" \
-			-o "APT::FTPArchive::Release::Components=$component" \
-			-o "APT::FTPArchive::Release::Architecture=$arch" \
-			release \
-			"$APTDIR/dists/$codename/$component/binary-$arch" > "$APTDIR/dists/$codename/$component/binary-$arch/Release"
-	done
-done

hack/make/release-rpm

@@ -1,71 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script creates the yum repos for the .rpm files generated by hack/make/build-rpm
-#
-# The following can then be used as a yum repo:
-# 	http://yum.dockerproject.org/repo/$release/$distro/$distro-version
-#
-# For example:
-# 	http://yum.dockerproject.org/repo/main/fedora/23
-# 	http://yum.dockerproject.org/repo/testing/centos/7
-# 	http://yum.dockerproject.org/repo/experimental/fedora/23
-# 	http://yum.dockerproject.org/repo/main/centos/7
-#
-# ... and so on and so forth for the builds created by hack/make/build-rpm
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-YUMDIR=$DOCKER_RELEASE_DIR/yum/repo
-: ${GPG_KEYID:=releasedocker}
-
-# get the release
-release="main"
-
-if [[ "$VERSION" == *-rc* ]]; then
-	release="testing"
-fi
-
-if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-	release="experimental"
-fi
-
-# Setup the yum repo
-for dir in bundles/$VERSION/build-rpm/*/; do
-	version="$(basename "$dir")"
-	suite="${version##*-}"
-	distro="${version%-*}"
-
-	REPO=$YUMDIR/$release/$distro
-
-	# if the directory does not exist, initialize the yum repo
-	if [[ ! -d $REPO/$suite/Packages ]]; then
-		mkdir -p "$REPO/$suite/Packages"
-
-		createrepo --pretty "$REPO/$suite"
-	fi
-
-	# path to rpms
-	RPMFILE=( "bundles/$VERSION/build-rpm/$version/RPMS/"*"/docker-engine"*.rpm "bundles/$VERSION/build-rpm/$version/SRPMS/docker-engine"*.rpm )
-
-	# if we have a $GPG_PASSPHRASE we may as well
-	# sign the rpms before adding to repo
-	if [ ! -z $GPG_PASSPHRASE ]; then
-		# export our key to rpm import
-		gpg --armor --export "$GPG_KEYID" > /tmp/gpg
-		rpm --import /tmp/gpg
-
-		# sign the rpms
-		echo "yes" | setsid rpm \
-			--define "_gpg_name $GPG_KEYID" \
-			--define "_signature gpg" \
-			--define "__gpg_check_password_cmd /bin/true" \
-			--define "__gpg_sign_cmd %{__gpg} gpg --batch --no-armor --digest-algo 'sha512' --passphrase '$GPG_PASSPHRASE' --no-secmem-warning -u '%{_gpg_name}' --sign --detach-sign --output %{__signature_filename} %{__plaintext_filename}" \
-			--resign "${RPMFILE[@]}"
-	fi
-
-	# copy the rpms to the packages folder
-	cp "${RPMFILE[@]}" "$REPO/$suite/Packages"
-
-	# update the repo
-	createrepo --pretty --update "$REPO/$suite"
-done

hack/make/sign-repos

@@ -1,65 +0,0 @@
-#!/usr/bin/env bash
-
-# This script signs the deliverables from release-deb and release-rpm
-# with a designated GPG key.
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-: ${GPG_KEYID:=releasedocker}
-APTDIR=$DOCKER_RELEASE_DIR/apt/repo
-YUMDIR=$DOCKER_RELEASE_DIR/yum/repo
-
-if [ -z "$GPG_PASSPHRASE" ]; then
-	echo >&2 'you need to set GPG_PASSPHRASE in order to sign artifacts'
-	exit 1
-fi
-
-if [ ! -d $APTDIR ] && [ ! -d $YUMDIR ]; then
-	echo >&2 'release-rpm or release-deb must be run before sign-repos'
-	exit 1
-fi
-
-sign_packages(){
-	# sign apt repo metadata
-	if [ -d $APTDIR ]; then
-		# create file with public key
-		gpg --armor --export "$GPG_KEYID" > "$DOCKER_RELEASE_DIR/apt/gpg"
-
-		# sign the repo metadata
-		for F in $(find $APTDIR -name Release); do
-			if test "$F" -nt "$F.gpg" ; then
-				gpg -u "$GPG_KEYID" --passphrase "$GPG_PASSPHRASE" \
-					--digest-algo "sha512" \
-					--armor --sign --detach-sign \
-					--batch --yes \
-					--output "$F.gpg" "$F"
-			fi
-			inRelease="$(dirname "$F")/InRelease"
-			if test "$F" -nt "$inRelease" ; then
-				gpg -u "$GPG_KEYID" --passphrase "$GPG_PASSPHRASE" \
-					--digest-algo "sha512" \
-					--clearsign \
-					--batch --yes \
-					--output "$inRelease" "$F"
-			fi
-		done
-	fi
-
-	# sign yum repo metadata
-	if [ -d $YUMDIR ]; then
-		# create file with public key
-		gpg --armor --export "$GPG_KEYID" > "$DOCKER_RELEASE_DIR/yum/gpg"
-
-		# sign the repo metadata
-		for F in $(find $YUMDIR -name repomd.xml); do
-			if test "$F" -nt "$F.asc" ; then
-				gpg -u "$GPG_KEYID" --passphrase "$GPG_PASSPHRASE" \
-					--digest-algo "sha512" \
-					--armor --sign --detach-sign \
-					--batch --yes \
-					--output "$F.asc" "$F"
-			fi
-		done
-	fi
-}
-
-sign_packages

hack/make/test-old-apt-repo

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-versions=( 1.3.3 1.4.1 1.5.0 1.6.2 )
-
-install() {
-	local version=$1
-	local tmpdir=$(mktemp -d /tmp/XXXXXXXXXX)
-	local dockerfile="${tmpdir}/Dockerfile"
-	cat <<-EOF > "$dockerfile"
-	FROM debian:jessie
-	ENV VERSION ${version}
-	RUN apt-get update && apt-get install -y \
-		apt-transport-https \
-		ca-certificates \
-		--no-install-recommends
-	RUN echo "deb https://get.docker.com/ubuntu docker main" > /etc/apt/sources.list.d/docker.list
-	RUN apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 \
-		--recv-keys 36A1D7869245C8950F966E92D8576A8BA88D21E9
-	RUN apt-get update && apt-get install -y \
-		lxc-docker-\${VERSION}
-	EOF
-
-	docker build --rm --force-rm --no-cache -t docker-old-repo:${version} -f $dockerfile $tmpdir
-}
-
-for v in "${versions[@]}"; do
-	install "$v"
-done

hack/make/ubuntu

@@ -1,190 +0,0 @@
-#!/usr/bin/env bash
-
-PKGVERSION="${VERSION//-/'~'}"
-# if we have a "-dev" suffix or have change in Git, let's make this package version more complex so it works better
-if [[ "$VERSION" == *-dev ]] || [ -n "$(git status --porcelain)" ]; then
-	GIT_UNIX="$(git log -1 --pretty='%at')"
-	GIT_DATE="$(date --date "@$GIT_UNIX" +'%Y%m%d.%H%M%S')"
-	GIT_COMMIT="$(git log -1 --pretty='%h')"
-	GIT_VERSION="git${GIT_DATE}.0.${GIT_COMMIT}"
-	# GIT_VERSION is now something like 'git20150128.112847.0.17e840a'
-	PKGVERSION="$PKGVERSION~$GIT_VERSION"
-fi
-
-# $ dpkg --compare-versions 1.5.0 gt 1.5.0~rc1 && echo true || echo false
-# true
-# $ dpkg --compare-versions 1.5.0~rc1 gt 1.5.0~git20150128.112847.17e840a && echo true || echo false
-# true
-# $ dpkg --compare-versions 1.5.0~git20150128.112847.17e840a gt 1.5.0~dev~git20150128.112847.17e840a && echo true || echo false
-# true
-
-# ie, 1.5.0 > 1.5.0~rc1 > 1.5.0~git20150128.112847.17e840a > 1.5.0~dev~git20150128.112847.17e840a
-
-PACKAGE_ARCHITECTURE="$(dpkg-architecture -qDEB_HOST_ARCH)"
-PACKAGE_URL="https://www.docker.com/"
-PACKAGE_MAINTAINER="support@docker.com"
-PACKAGE_DESCRIPTION="Linux container runtime
-Docker complements LXC with a high-level API which operates at the process
-level. It runs unix processes with strong guarantees of isolation and
-repeatability across servers.
-Docker is a great building block for automating distributed systems:
-large-scale web deployments, database clusters, continuous deployment systems,
-private PaaS, service-oriented architectures, etc."
-PACKAGE_LICENSE="Apache-2.0"
-
-# Build docker as an ubuntu package using FPM and REPREPRO (sue me).
-# bundle_binary must be called first.
-bundle_ubuntu() {
-	DIR="$ABS_DEST/build"
-
-	# Include our udev rules
-	mkdir -p "$DIR/etc/udev/rules.d"
-	cp contrib/udev/80-docker.rules "$DIR/etc/udev/rules.d/"
-
-	# Include our init scripts
-	mkdir -p "$DIR/etc/init"
-	cp contrib/init/upstart/docker.conf "$DIR/etc/init/"
-	mkdir -p "$DIR/etc/init.d"
-	cp contrib/init/sysvinit-debian/docker "$DIR/etc/init.d/"
-	mkdir -p "$DIR/etc/default"
-	cp contrib/init/sysvinit-debian/docker.default "$DIR/etc/default/docker"
-	mkdir -p "$DIR/lib/systemd/system"
-	cp contrib/init/systemd/docker.{service,socket} "$DIR/lib/systemd/system/"
-
-	# Include contributed completions
-	mkdir -p "$DIR/etc/bash_completion.d"
-	cp contrib/completion/bash/docker "$DIR/etc/bash_completion.d/"
-	mkdir -p "$DIR/usr/share/zsh/vendor-completions"
-	cp contrib/completion/zsh/_docker "$DIR/usr/share/zsh/vendor-completions/"
-	mkdir -p "$DIR/etc/fish/completions"
-	cp contrib/completion/fish/docker.fish "$DIR/etc/fish/completions/"
-
-	# Include man pages
-	make manpages
-	manRoot="$DIR/usr/share/man"
-	mkdir -p "$manRoot"
-	for manDir in man/man?; do
-		manBase="$(basename "$manDir")" # "man1"
-		for manFile in "$manDir"/*; do
-			manName="$(basename "$manFile")" # "docker-build.1"
-			mkdir -p "$manRoot/$manBase"
-			gzip -c "$manFile" > "$manRoot/$manBase/$manName.gz"
-		done
-	done
-
-	# Copy the binary
-	# This will fail if the binary bundle hasn't been built
-	mkdir -p "$DIR/usr/bin"
-	cp "$DEST/../binary/docker-$VERSION" "$DIR/usr/bin/docker"
-
-	# Generate postinst/prerm/postrm scripts
-	cat > "$DEST/postinst" <<'EOF'
-#!/bin/sh
-set -e
-set -u
-
-if [ "$1" = 'configure' ] && [ -z "$2" ]; then
-	if ! getent group docker > /dev/null; then
-		groupadd --system docker
-	fi
-fi
-
-if ! { [ -x /sbin/initctl ] && /sbin/initctl version 2>/dev/null | grep -q upstart; }; then
-	# we only need to do this if upstart isn't in charge
-	update-rc.d docker defaults > /dev/null || true
-fi
-if [ -n "$2" ]; then
-	_dh_action=restart
-else
-	_dh_action=start
-fi
-service docker $_dh_action 2>/dev/null || true
-
-#DEBHELPER#
-EOF
-	cat > "$DEST/prerm" <<'EOF'
-#!/bin/sh
-set -e
-set -u
-
-service docker stop 2>/dev/null || true
-
-#DEBHELPER#
-EOF
-	cat > "$DEST/postrm" <<'EOF'
-#!/bin/sh
-set -e
-set -u
-
-if [ "$1" = "purge" ] ; then
-	update-rc.d docker remove > /dev/null || true
-fi
-
-# In case this system is running systemd, we make systemd reload the unit files
-# to pick up changes.
-if [ -d /run/systemd/system ] ; then
-	systemctl --system daemon-reload > /dev/null || true
-fi
-
-#DEBHELPER#
-EOF
-	# TODO swaths of these were borrowed from debhelper's auto-inserted stuff, because we're still using fpm - we need to use debhelper instead, and somehow reconcile Ubuntu that way
-	chmod +x "$DEST/postinst" "$DEST/prerm" "$DEST/postrm"
-
-	(
-		# switch directories so we create *.deb in the right folder
-		cd "$DEST"
-
-		# create lxc-docker-VERSION package
-		fpm -s dir -C "$DIR" \
-			--name "lxc-docker-$VERSION" --version "$PKGVERSION" \
-			--after-install "$ABS_DEST/postinst" \
-			--before-remove "$ABS_DEST/prerm" \
-			--after-remove "$ABS_DEST/postrm" \
-			--architecture "$PACKAGE_ARCHITECTURE" \
-			--prefix / \
-			--depends iptables \
-			--deb-recommends aufs-tools \
-			--deb-recommends ca-certificates \
-			--deb-recommends git \
-			--deb-recommends xz-utils \
-			--deb-recommends 'cgroupfs-mount | cgroup-lite' \
-			--deb-suggests apparmor \
-			--description "$PACKAGE_DESCRIPTION" \
-			--maintainer "$PACKAGE_MAINTAINER" \
-			--conflicts docker \
-			--conflicts docker.io \
-			--conflicts lxc-docker-virtual-package \
-			--provides lxc-docker \
-			--provides lxc-docker-virtual-package \
-			--replaces lxc-docker \
-			--replaces lxc-docker-virtual-package \
-			--url "$PACKAGE_URL" \
-			--license "$PACKAGE_LICENSE" \
-			--config-files /etc/udev/rules.d/80-docker.rules \
-			--config-files /etc/init/docker.conf \
-			--config-files /etc/init.d/docker \
-			--config-files /etc/default/docker \
-			--deb-compression gz \
-			-t deb .
-		# TODO replace "Suggests: cgroup-lite" with "Recommends: cgroupfs-mount | cgroup-lite" once cgroupfs-mount is available
-
-		# create empty lxc-docker wrapper package
-		fpm -s empty \
-			--name lxc-docker --version "$PKGVERSION" \
-			--architecture "$PACKAGE_ARCHITECTURE" \
-			--depends lxc-docker-$VERSION \
-			--description "$PACKAGE_DESCRIPTION" \
-			--maintainer "$PACKAGE_MAINTAINER" \
-			--url "$PACKAGE_URL" \
-			--license "$PACKAGE_LICENSE" \
-			--deb-compression gz \
-			-t deb
-	)
-
-	# clean up after ourselves so we have a clean output directory
-	rm "$DEST/postinst" "$DEST/prerm" "$DEST/postrm"
-	rm -r "$DIR"
-}
-
-bundle_ubuntu

hack/make/update-apt-repo

@@ -1,70 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script updates the apt repo in $DOCKER_RELEASE_DIR/apt/repo.
-# This script is a "fix all" for any sort of problems that might have occurred with
-# the Release or Package files in the repo.
-# It should only be used in the rare case of extreme emergencies to regenerate
-# Release and Package files for the apt repo.
-#
-# NOTE: Always be sure to re-sign the repo with hack/make/sign-repos after running
-# this script.
-
-: ${DOCKER_RELEASE_DIR:=$DEST}
-APTDIR=$DOCKER_RELEASE_DIR/apt/repo
-
-# supported arches/sections
-arches=( amd64 i386 )
-
-# Preserve existing components but don't add any non-existing ones
-for component in main testing experimental ; do
-	if ls "$APTDIR/dists/*/$component" >/dev/null 2>&1 ; then
-		components+=( $component )
-	fi
-done
-
-dists=( $(find "${APTDIR}/dists" -maxdepth 1 -mindepth 1 -type d) )
-
-# override component if it is set
-if [ "$COMPONENT" ]; then
-	components=( $COMPONENT )
-fi
-
-# release the debs
-for version in "${dists[@]}"; do
-	for component in "${components[@]}"; do
-		codename="${version//debootstrap-}"
-
-		# update the filelist for this codename/component
-		find "$APTDIR/pool/$component" \
-			-name *~${codename#*-}*.deb > "$APTDIR/dists/$codename/$component/filelist"
-	done
-done
-
-# run the apt-ftparchive commands so we can have pinning
-apt-ftparchive generate "$APTDIR/conf/apt-ftparchive.conf"
-
-for dist in "${dists[@]}"; do
-	version=$(basename "$dist")
-	for component in "${components[@]}"; do
-		codename="${version//debootstrap-}"
-
-		apt-ftparchive \
-			-o "APT::FTPArchive::Release::Codename=$codename" \
-			-o "APT::FTPArchive::Release::Suite=$codename" \
-			-c "$APTDIR/conf/docker-engine-release.conf" \
-			release \
-			"$APTDIR/dists/$codename" > "$APTDIR/dists/$codename/Release"
-
-		for arch in "${arches[@]}"; do
-			apt-ftparchive \
-				-o "APT::FTPArchive::Release::Codename=$codename" \
-				-o "APT::FTPArchive::Release::Suite=$codename" \
-				-o "APT::FTPArchive::Release::Component=$component" \
-				-o "APT::FTPArchive::Release::Architecture=$arch" \
-				-c "$APTDIR/conf/docker-engine-release.conf" \
-				release \
-				"$APTDIR/dists/$codename/$component/binary-$arch" > "$APTDIR/dists/$codename/$component/binary-$arch/Release"
-		done
-	done
-done

hack/make/win

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# explicit list of os/arch combos that support being a daemon
-declare -A daemonSupporting
-daemonSupporting=(
-	[linux/amd64]=1
-	[windows/amd64]=1
-)
-platform="windows/amd64"
-export DEST="$DEST/$platform" # bundles/VERSION/cross/GOOS/GOARCH/docker-VERSION
-mkdir -p "$DEST"
-ABS_DEST="$(cd "$DEST" && pwd -P)"
-export GOOS=${platform%/*}
-export GOARCH=${platform##*/}
-if [ -z "${daemonSupporting[$platform]}" ]; then
-	export LDFLAGS_STATIC_DOCKER="" # we just need a simple client for these platforms
-	export BUILDFLAGS=( "${ORIG_BUILDFLAGS[@]/ daemon/}" ) # remove the "daemon" build tag from platforms that aren't supported
-fi
-source "${MAKEDIR}/binary"

hack/release.sh

@@ -1,313 +0,0 @@
-#!/usr/bin/env bash
-set -e
-
-# This script looks for bundles built by make.sh, and releases them on a
-# public S3 bucket.
-#
-# Bundles should be available for the VERSION string passed as argument.
-#
-# The correct way to call this script is inside a container built by the
-# official Dockerfile at the root of the Docker source code. The Dockerfile,
-# make.sh and release.sh should all be from the same source code revision.
-
-set -o pipefail
-
-# Print a usage message and exit.
-usage() {
-	cat >&2 <<'EOF'
-To run, I need:
-- to be in a container generated by the Dockerfile at the top of the Docker
-  repository;
-- to be provided with the location of an S3 bucket and path, in
-  environment variables AWS_S3_BUCKET and AWS_S3_BUCKET_PATH (default: '');
-- to be provided with AWS credentials for this S3 bucket, in environment
-  variables AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY;
-- a generous amount of good will and nice manners.
-The canonical way to run me is to run the image produced by the Dockerfile: e.g.:"
-
-docker run -e AWS_S3_BUCKET=test.docker.com \
-           -e AWS_ACCESS_KEY_ID     \
-           -e AWS_SECRET_ACCESS_KEY \
-           -e AWS_DEFAULT_REGION    \
-           -it --privileged         \
-           docker ./hack/release.sh
-EOF
-	exit 1
-}
-
-[ "$AWS_S3_BUCKET" ] || usage
-[ "$AWS_ACCESS_KEY_ID" ] || usage
-[ "$AWS_SECRET_ACCESS_KEY" ] || usage
-[ -d /go/src/github.com/docker/docker ] || usage
-cd /go/src/github.com/docker/docker
-[ -x hack/make.sh ] || usage
-
-export AWS_DEFAULT_REGION
-: ${AWS_DEFAULT_REGION:=us-west-1}
-
-AWS_CLI=${AWS_CLI:-'aws'}
-
-RELEASE_BUNDLES=(
-	binary
-	cross
-	tgz
-)
-
-if [ "$1" != '--release-regardless-of-test-failure' ]; then
-	RELEASE_BUNDLES=(
-		test-unit
-		"${RELEASE_BUNDLES[@]}"
-		test-integration
-	)
-fi
-
-VERSION=$(< VERSION)
-BUCKET=$AWS_S3_BUCKET
-BUCKET_PATH=$BUCKET
-[[ -n "$AWS_S3_BUCKET_PATH" ]] && BUCKET_PATH+=/$AWS_S3_BUCKET_PATH
-
-if command -v git &> /dev/null && git rev-parse &> /dev/null; then
-	if [ -n "$(git status --porcelain --untracked-files=no)" ]; then
-		echo "You cannot run the release script on a repo with uncommitted changes"
-		usage
-	fi
-fi
-
-# These are the 2 keys we've used to sign the deb's
-#   release (get.docker.com)
-#	GPG_KEY="36A1D7869245C8950F966E92D8576A8BA88D21E9"
-#   test    (test.docker.com)
-#	GPG_KEY="740B314AE3941731B942C66ADF4FD13717AAD7D6"
-
-setup_s3() {
-	echo "Setting up S3"
-	# Try creating the bucket. Ignore errors (it might already exist).
-	$AWS_CLI s3 mb "s3://$BUCKET" 2>/dev/null || true
-	# Check access to the bucket.
-	$AWS_CLI s3 ls "s3://$BUCKET" >/dev/null
-	# Make the bucket accessible through website endpoints.
-	$AWS_CLI s3 website --index-document index --error-document error "s3://$BUCKET"
-}
-
-# write_to_s3 uploads the contents of standard input to the specified S3 url.
-write_to_s3() {
-	DEST=$1
-	F=`mktemp`
-	cat > "$F"
-	$AWS_CLI s3 cp --acl public-read --content-type 'text/plain' "$F" "$DEST"
-	rm -f "$F"
-}
-
-s3_url() {
-	case "$BUCKET" in
-		get.docker.com|test.docker.com|experimental.docker.com)
-			echo "https://$BUCKET_PATH"
-			;;
-		*)
-			BASE_URL="http://${BUCKET}.s3-website-${AWS_DEFAULT_REGION}.amazonaws.com"
-			if [[ -n "$AWS_S3_BUCKET_PATH" ]] ; then
-				echo "$BASE_URL/$AWS_S3_BUCKET_PATH"
-			else
-				echo "$BASE_URL"
-			fi
-			;;
-	esac
-}
-
-build_all() {
-	echo "Building release"
-	if ! ./hack/make.sh "${RELEASE_BUNDLES[@]}"; then
-		echo >&2
-		echo >&2 'The build or tests appear to have failed.'
-		echo >&2
-		echo >&2 'You, as the release  maintainer, now have a couple options:'
-		echo >&2 '- delay release and fix issues'
-		echo >&2 '- delay release and fix issues'
-		echo >&2 '- did we mention how important this is?  issues need fixing :)'
-		echo >&2
-		echo >&2 'As a final LAST RESORT, you (because only you, the release maintainer,'
-		echo >&2 ' really knows all the hairy problems at hand with the current release'
-		echo >&2 ' issues) may bypass this checking by running this script again with the'
-		echo >&2 ' single argument of "--release-regardless-of-test-failure", which will skip'
-		echo >&2 ' running the test suite, and will only build the binaries and packages.  Please'
-		echo >&2 ' avoid using this if at all possible.'
-		echo >&2
-		echo >&2 'Regardless, we cannot stress enough the scarcity with which this bypass'
-		echo >&2 ' should be used.  If there are release issues, we should always err on the'
-		echo >&2 ' side of caution.'
-		echo >&2
-		exit 1
-	fi
-}
-
-upload_release_build() {
-	src="$1"
-	dst="$2"
-	latest="$3"
-
-	echo
-	echo "Uploading $src"
-	echo "  to $dst"
-	echo
-	$AWS_CLI s3 cp --follow-symlinks --acl public-read "$src" "$dst"
-	if [ "$latest" ]; then
-		echo
-		echo "Copying to $latest"
-		echo
-		$AWS_CLI s3 cp --acl public-read "$dst" "$latest"
-	fi
-
-	# get hash files too (see hash_files() in hack/make.sh)
-	for hashAlgo in md5 sha256; do
-		if [ -e "$src.$hashAlgo" ]; then
-			echo
-			echo "Uploading $src.$hashAlgo"
-			echo "  to $dst.$hashAlgo"
-			echo
-			$AWS_CLI s3 cp --follow-symlinks --acl public-read --content-type='text/plain' "$src.$hashAlgo" "$dst.$hashAlgo"
-			if [ "$latest" ]; then
-				echo
-				echo "Copying to $latest.$hashAlgo"
-				echo
-				$AWS_CLI s3 cp --acl public-read "$dst.$hashAlgo" "$latest.$hashAlgo"
-			fi
-		fi
-	done
-}
-
-release_build() {
-	echo "Releasing binaries"
-	GOOS=$1
-	GOARCH=$2
-
-	binDir=bundles/$VERSION/cross/$GOOS/$GOARCH
-	tgzDir=bundles/$VERSION/tgz/$GOOS/$GOARCH
-	binary=docker-$VERSION
-	zipExt=".tgz"
-	binaryExt=""
-	tgz=$binary$zipExt
-
-	latestBase=
-	if [ -z "$NOLATEST" ]; then
-		latestBase=docker-latest
-	fi
-
-	# we need to map our GOOS and GOARCH to uname values
-	# see https://en.wikipedia.org/wiki/Uname
-	# ie, GOOS=linux -> "uname -s"=Linux
-
-	s3Os=$GOOS
-	case "$s3Os" in
-		darwin)
-			s3Os=Darwin
-			;;
-		freebsd)
-			s3Os=FreeBSD
-			;;
-		linux)
-			s3Os=Linux
-			;;
-		windows)
-			# this is windows use the .zip and .exe extensions for the files.
-			s3Os=Windows
-			zipExt=".zip"
-			binaryExt=".exe"
-			tgz=$binary$zipExt
-			binary+=$binaryExt
-			;;
-		*)
-			echo >&2 "error: can't convert $s3Os to an appropriate value for 'uname -s'"
-			exit 1
-			;;
-	esac
-
-	s3Arch=$GOARCH
-	case "$s3Arch" in
-		amd64)
-			s3Arch=x86_64
-			;;
-		386)
-			s3Arch=i386
-			;;
-		arm)
-			s3Arch=armel
-			# someday, we might potentially support multiple GOARM values, in which case we might get armhf here too
-			;;
-		*)
-			echo >&2 "error: can't convert $s3Arch to an appropriate value for 'uname -m'"
-			exit 1
-			;;
-	esac
-
-	s3Dir="s3://$BUCKET_PATH/builds/$s3Os/$s3Arch"
-	# latest=
-	latestTgz=
-	if [ "$latestBase" ]; then
-		# commented out since we aren't uploading binaries right now.
-		# latest="$s3Dir/$latestBase$binaryExt"
-		# we don't include the $binaryExt because we don't want docker.exe.zip
-		latestTgz="$s3Dir/$latestBase$zipExt"
-	fi
-
-	if [ ! -f "$tgzDir/$tgz" ]; then
-		echo >&2 "error: can't find $tgzDir/$tgz - was it packaged properly?"
-		exit 1
-	fi
-	# disable binary uploads for now. Only providing tgz downloads
-	# upload_release_build "$binDir/$binary" "$s3Dir/$binary" "$latest"
-	upload_release_build "$tgzDir/$tgz" "$s3Dir/$tgz" "$latestTgz"
-}
-
-# Upload binaries and tgz files to S3
-release_binaries() {
-	[ "$(find bundles/$VERSION -path "bundles/$VERSION/cross/*/*/docker-$VERSION")" != "" ] || {
-		echo >&2 './hack/make.sh must be run before release_binaries'
-		exit 1
-	}
-
-	for d in bundles/$VERSION/cross/*/*; do
-		GOARCH="$(basename "$d")"
-		GOOS="$(basename "$(dirname "$d")")"
-		release_build "$GOOS" "$GOARCH"
-	done
-
-	# TODO create redirect from builds/*/i686 to builds/*/i386
-
-	cat <<EOF | write_to_s3 s3://$BUCKET_PATH/builds/index
-# To install, run the following commands as root:
-curl -fsSLO $(s3_url)/builds/Linux/x86_64/docker-$VERSION.tgz && tar --strip-components=1 -xvzf docker-$VERSION.tgz -C /usr/local/bin
-
-# Then start docker in daemon mode:
-/usr/local/bin/dockerd
-EOF
-
-	# Add redirect at /builds/info for URL-backwards-compatibility
-	rm -rf /tmp/emptyfile && touch /tmp/emptyfile
-	$AWS_CLI s3 cp --acl public-read --website-redirect '/builds/' --content-type='text/plain' /tmp/emptyfile "s3://$BUCKET_PATH/builds/info"
-
-	if [ -z "$NOLATEST" ]; then
-		echo "Advertising $VERSION on $BUCKET_PATH as most recent version"
-		echo "$VERSION" | write_to_s3 "s3://$BUCKET_PATH/latest"
-	fi
-}
-
-main() {
-	[ "$SKIP_RELEASE_BUILD" = '1' ] || build_all
-	setup_s3
-	release_binaries
-}
-
-main
-
-echo
-echo
-echo "Release complete; see $(s3_url)"
-echo "Use the following text to announce the release:"
-echo
-echo "We have just pushed $VERSION to $(s3_url). You can download it with the following:"
-echo
-echo "Linux 64bit tgz: $(s3_url)/builds/Linux/x86_64/docker-$VERSION.tgz"
-echo "Darwin/OSX 64bit client tgz: $(s3_url)/builds/Darwin/x86_64/docker-$VERSION.tgz"
-echo "Windows 64bit zip: $(s3_url)/builds/Windows/x86_64/docker-$VERSION.zip"
-echo "Windows 32bit client zip: $(s3_url)/builds/Windows/i386/docker-$VERSION.zip"
-echo