linux-surface/patches/6.4/0004-ipts.patch

From 3ec62f7bde89e3c84aae8eac58e5e9a173383d35 Mon Sep 17 00:00:00 2001
From: Dorian Stoll <dorian.stoll@tmsp.io>
Date: Thu, 30 Jul 2020 13:21:53 +0200
Subject: [PATCH] misc: mei: Add missing IPTS device IDs

Patchset: ipts
---
 drivers/misc/mei/hw-me-regs.h | 1 +
 drivers/misc/mei/pci-me.c     | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index bdc65d50b945..08723c01d727 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -92,6 +92,7 @@
 #define MEI_DEV_ID_CDF        0x18D3  /* Cedar Fork */
 
 #define MEI_DEV_ID_ICP_LP     0x34E0  /* Ice Lake Point LP */
+#define MEI_DEV_ID_ICP_LP_3   0x34E4  /* Ice Lake Point LP 3 (iTouch) */
 #define MEI_DEV_ID_ICP_N      0x38E0  /* Ice Lake Point N */
 
 #define MEI_DEV_ID_JSP_N      0x4DE0  /* Jasper Lake Point N */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 676d566f38dd..6b37dd1f8b2a 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -97,6 +97,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP_3, MEI_ME_PCH12_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)},
-- 
2.41.0

From 5969d31250c82992b3e5982bf73723dc685099e4 Mon Sep 17 00:00:00 2001
From: Liban Hannan <liban.p@gmail.com>
Date: Tue, 12 Apr 2022 23:31:12 +0100
Subject: [PATCH] iommu: ipts: use IOMMU passthrough mode for IPTS

Adds a quirk so that IOMMU uses passthrough mode for the IPTS device.
Otherwise, when IOMMU is enabled, IPTS produces DMAR errors like:

DMAR: [DMA Read NO_PASID] Request device [00:16.4] fault addr
0x104ea3000 [fault reason 0x06] PTE Read access is not set

This is very similar to the bug described at:
https://bugs.launchpad.net/bugs/1958004

Fixed with the following patch which this patch basically copies:
https://launchpadlibrarian.net/586396847/43255ca.diff
Patchset: ipts
---
 drivers/iommu/intel/iommu.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index b871a6afd803..0d4542b7365d 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -37,6 +37,8 @@
 #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
 #define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
 #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_IPTS(pdev) ((pdev)->vendor == PCI_VENDOR_ID_INTEL &&	\
+			    ((pdev)->device == 0x9d3e))
 #define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
 
 #define IOAPIC_RANGE_START	(0xfee00000)
@@ -287,12 +289,14 @@ int intel_iommu_enabled = 0;
 EXPORT_SYMBOL_GPL(intel_iommu_enabled);
 
 static int dmar_map_gfx = 1;
+static int dmar_map_ipts = 1;
 static int intel_iommu_superpage = 1;
 static int iommu_identity_mapping;
 static int iommu_skip_te_disable;
 
 #define IDENTMAP_GFX		2
 #define IDENTMAP_AZALIA		4
+#define IDENTMAP_IPTS		16
 
 const struct iommu_ops intel_iommu_ops;
 
@@ -2560,6 +2564,9 @@ static int device_def_domain_type(struct device *dev)
 
 		if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
 			return IOMMU_DOMAIN_IDENTITY;
+
+		if ((iommu_identity_mapping & IDENTMAP_IPTS) && IS_IPTS(pdev))
+			return IOMMU_DOMAIN_IDENTITY;
 	}
 
 	return 0;
@@ -2867,6 +2874,9 @@ static int __init init_dmars(void)
 	if (!dmar_map_gfx)
 		iommu_identity_mapping |= IDENTMAP_GFX;
 
+	if (!dmar_map_ipts)
+		iommu_identity_mapping |= IDENTMAP_IPTS;
+
 	check_tylersburg_isoch();
 
 	ret = si_domain_init(hw_pass_through);
@@ -4778,6 +4788,17 @@ static void quirk_iommu_igfx(struct pci_dev *dev)
 	dmar_map_gfx = 0;
 }
 
+static void quirk_iommu_ipts(struct pci_dev *dev)
+{
+	if (!IS_IPTS(dev))
+		return;
+
+	if (risky_device(dev))
+		return;
+
+	pci_info(dev, "Passthrough IOMMU for IPTS\n");
+	dmar_map_ipts = 0;
+}
 /* G4x/GM45 integrated gfx dmar support is totally busted. */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_igfx);
@@ -4813,6 +4834,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1632, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163A, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x163D, quirk_iommu_igfx);
 
+/* disable IPTS dmar support */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9D3E, quirk_iommu_ipts);
+
 static void quirk_iommu_rwbf(struct pci_dev *dev)
 {
 	if (risky_device(dev))
-- 
2.41.0

From 5570234ede6474477c2e8445c063f7cfac08c45a Mon Sep 17 00:00:00 2001
From: Dorian Stoll <dorian.stoll@tmsp.io>
Date: Sun, 11 Dec 2022 12:00:59 +0100
Subject: [PATCH] hid: Add support for Intel Precise Touch and Stylus

Based on linux-surface/intel-precise-touch@8abe268

Signed-off-by: Dorian Stoll <dorian.stoll@tmsp.io>
Patchset: ipts
---
 drivers/hid/Kconfig            |   2 +
 drivers/hid/Makefile           |   2 +
 drivers/hid/ipts/Kconfig       |  14 +
 drivers/hid/ipts/Makefile      |  14 +
 drivers/hid/ipts/cmd.c         |  62 +++++
 drivers/hid/ipts/cmd.h         |  61 ++++
 drivers/hid/ipts/context.h     |  51 ++++
 drivers/hid/ipts/control.c     | 495 +++++++++++++++++++++++++++++++++
 drivers/hid/ipts/control.h     | 127 +++++++++
 drivers/hid/ipts/desc.h        |  81 ++++++
 drivers/hid/ipts/hid.c         | 348 +++++++++++++++++++++++
 drivers/hid/ipts/hid.h         |  22 ++
 drivers/hid/ipts/main.c        | 127 +++++++++
 drivers/hid/ipts/mei.c         | 189 +++++++++++++
 drivers/hid/ipts/mei.h         |  67 +++++
 drivers/hid/ipts/receiver.c    | 249 +++++++++++++++++
 drivers/hid/ipts/receiver.h    |  17 ++
 drivers/hid/ipts/resources.c   | 108 +++++++
 drivers/hid/ipts/resources.h   |  39 +++
 drivers/hid/ipts/spec-data.h   | 100 +++++++
 drivers/hid/ipts/spec-device.h | 285 +++++++++++++++++++
 drivers/hid/ipts/spec-hid.h    |  35 +++
 drivers/hid/ipts/thread.c      |  85 ++++++
 drivers/hid/ipts/thread.h      |  60 ++++
 24 files changed, 2640 insertions(+)
 create mode 100644 drivers/hid/ipts/Kconfig
 create mode 100644 drivers/hid/ipts/Makefile
 create mode 100644 drivers/hid/ipts/cmd.c
 create mode 100644 drivers/hid/ipts/cmd.h
 create mode 100644 drivers/hid/ipts/context.h
 create mode 100644 drivers/hid/ipts/control.c
 create mode 100644 drivers/hid/ipts/control.h
 create mode 100644 drivers/hid/ipts/desc.h
 create mode 100644 drivers/hid/ipts/hid.c
 create mode 100644 drivers/hid/ipts/hid.h
 create mode 100644 drivers/hid/ipts/main.c
 create mode 100644 drivers/hid/ipts/mei.c
 create mode 100644 drivers/hid/ipts/mei.h
 create mode 100644 drivers/hid/ipts/receiver.c
 create mode 100644 drivers/hid/ipts/receiver.h
 create mode 100644 drivers/hid/ipts/resources.c
 create mode 100644 drivers/hid/ipts/resources.h
 create mode 100644 drivers/hid/ipts/spec-data.h
 create mode 100644 drivers/hid/ipts/spec-device.h
 create mode 100644 drivers/hid/ipts/spec-hid.h
 create mode 100644 drivers/hid/ipts/thread.c
 create mode 100644 drivers/hid/ipts/thread.h

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index b977450cac75..dcedd5b90f35 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1316,4 +1316,6 @@ source "drivers/hid/amd-sfh-hid/Kconfig"
 
 source "drivers/hid/surface-hid/Kconfig"
 
+source "drivers/hid/ipts/Kconfig"
+
 endif # HID_SUPPORT
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 5d37cacbde33..285e12d95b0e 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -167,3 +167,5 @@ obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER)	+= intel-ish-hid/
 obj-$(CONFIG_AMD_SFH_HID)       += amd-sfh-hid/
 
 obj-$(CONFIG_SURFACE_HID_CORE)  += surface-hid/
+
+obj-$(CONFIG_HID_IPTS)          += ipts/
diff --git a/drivers/hid/ipts/Kconfig b/drivers/hid/ipts/Kconfig
new file mode 100644
index 000000000000..297401bd388d
--- /dev/null
+++ b/drivers/hid/ipts/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config HID_IPTS
+	tristate "Intel Precise Touch & Stylus"
+	depends on INTEL_MEI
+	depends on HID
+	help
+	  Say Y here if your system has a touchscreen using Intels
+	  Precise Touch & Stylus (IPTS) technology.
+
+	  If unsure say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipts.
diff --git a/drivers/hid/ipts/Makefile b/drivers/hid/ipts/Makefile
new file mode 100644
index 000000000000..0fe655bccdc0
--- /dev/null
+++ b/drivers/hid/ipts/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Makefile for the IPTS touchscreen driver
+#
+
+obj-$(CONFIG_HID_IPTS) += ipts.o
+ipts-objs := cmd.o
+ipts-objs += control.o
+ipts-objs += hid.o
+ipts-objs += main.o
+ipts-objs += mei.o
+ipts-objs += receiver.o
+ipts-objs += resources.o
+ipts-objs += thread.o
diff --git a/drivers/hid/ipts/cmd.c b/drivers/hid/ipts/cmd.c
new file mode 100644
index 000000000000..7fd69271ccd5
--- /dev/null
+++ b/drivers/hid/ipts/cmd.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include "cmd.h"
+#include "context.h"
+#include "mei.h"
+#include "spec-device.h"
+
+int ipts_cmd_recv_timeout(struct ipts_context *ipts, enum ipts_command_code code,
+			  struct ipts_response *rsp, u64 timeout)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!rsp)
+		return -EFAULT;
+
+	/*
+	 * In a response, the command code will have the most significant bit flipped to 1.
+	 * If code is passed to ipts_mei_recv as is, no messages will be received.
+	 */
+	ret = ipts_mei_recv(&ipts->mei, code | IPTS_RSP_BIT, rsp, timeout);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(ipts->dev, "Received 0x%02X with status 0x%02X\n", code, rsp->status);
+
+	/*
+	 * Some devices will always return this error.
+	 * It is allowed to ignore it and to try continuing.
+	 */
+	if (rsp->status == IPTS_STATUS_COMPAT_CHECK_FAIL)
+		rsp->status = IPTS_STATUS_SUCCESS;
+
+	return 0;
+}
+
+int ipts_cmd_send(struct ipts_context *ipts, enum ipts_command_code code, void *data, size_t size)
+{
+	struct ipts_command cmd = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	cmd.cmd = code;
+
+	if (data && size > 0)
+		memcpy(cmd.payload, data, size);
+
+	dev_dbg(ipts->dev, "Sending 0x%02X with %ld bytes payload\n", code, size);
+	return ipts_mei_send(&ipts->mei, &cmd, sizeof(cmd.cmd) + size);
+}
diff --git a/drivers/hid/ipts/cmd.h b/drivers/hid/ipts/cmd.h
new file mode 100644
index 000000000000..924758ffee67
--- /dev/null
+++ b/drivers/hid/ipts/cmd.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_CMD_H
+#define IPTS_CMD_H
+
+#include <linux/types.h>
+
+#include "context.h"
+#include "spec-device.h"
+
+/*
+ * The default timeout for receiving responses
+ */
+#define IPTS_CMD_DEFAULT_TIMEOUT 1000
+
+/*
+ * ipts_cmd_recv_timeout() - Receives a response to a command.
+ * @ipts: The IPTS driver context.
+ * @code: The type of the command / response.
+ * @rsp: The address that the received response will be copied to.
+ * @timeout: How many milliseconds the function will wait at most.
+ *
+ * A negative timeout means to wait forever.
+ *
+ * Returns: 0 on success, <0 on error, -EAGAIN if no response has been received.
+ */
+int ipts_cmd_recv_timeout(struct ipts_context *ipts, enum ipts_command_code code,
+			  struct ipts_response *rsp, u64 timeout);
+
+/*
+ * ipts_cmd_recv() - Receives a response to a command.
+ * @ipts: The IPTS driver context.
+ * @code: The type of the command / response.
+ * @rsp: The address that the received response will be copied to.
+ *
+ * Returns: 0 on success, <0 on error, -EAGAIN if no response has been received.
+ */
+static inline int ipts_cmd_recv(struct ipts_context *ipts, enum ipts_command_code code,
+				struct ipts_response *rsp)
+{
+	return ipts_cmd_recv_timeout(ipts, code, rsp, IPTS_CMD_DEFAULT_TIMEOUT);
+}
+
+/*
+ * ipts_cmd_send() - Executes a command on the device.
+ * @ipts: The IPTS driver context.
+ * @code: The type of the command to execute.
+ * @data: The payload containing parameters for the command.
+ * @size: The size of the payload.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_cmd_send(struct ipts_context *ipts, enum ipts_command_code code, void *data, size_t size);
+
+#endif /* IPTS_CMD_H */
diff --git a/drivers/hid/ipts/context.h b/drivers/hid/ipts/context.h
new file mode 100644
index 000000000000..3450a95e66ee
--- /dev/null
+++ b/drivers/hid/ipts/context.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_CONTEXT_H
+#define IPTS_CONTEXT_H
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include "mei.h"
+#include "resources.h"
+#include "spec-device.h"
+#include "thread.h"
+
+struct ipts_context {
+	struct device *dev;
+	struct ipts_mei mei;
+
+	enum ipts_mode mode;
+
+	/*
+	 * Prevents concurrent GET_FEATURE reports.
+	 */
+	struct mutex feature_lock;
+	struct completion feature_event;
+
+	/*
+	 * These are not inside of struct ipts_resources
+	 * because they don't own the memory they point to.
+	 */
+	struct ipts_buffer feature_report;
+	struct ipts_buffer descriptor;
+
+	struct hid_device *hid;
+	struct ipts_device_info info;
+	struct ipts_resources resources;
+
+	struct ipts_thread receiver_loop;
+};
+
+#endif /* IPTS_CONTEXT_H */
diff --git a/drivers/hid/ipts/control.c b/drivers/hid/ipts/control.c
new file mode 100644
index 000000000000..2f61500b5119
--- /dev/null
+++ b/drivers/hid/ipts/control.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+
+#include "cmd.h"
+#include "context.h"
+#include "control.h"
+#include "desc.h"
+#include "hid.h"
+#include "receiver.h"
+#include "resources.h"
+#include "spec-data.h"
+#include "spec-device.h"
+
+static int ipts_control_get_device_info(struct ipts_context *ipts, struct ipts_device_info *info)
+{
+	int ret = 0;
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!info)
+		return -EFAULT;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_GET_DEVICE_INFO, NULL, 0);
+	if (ret) {
+		dev_err(ipts->dev, "GET_DEVICE_INFO: send failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_GET_DEVICE_INFO, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "GET_DEVICE_INFO: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "GET_DEVICE_INFO: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	memcpy(info, rsp.payload, sizeof(*info));
+	return 0;
+}
+
+static int ipts_control_set_mode(struct ipts_context *ipts, enum ipts_mode mode)
+{
+	int ret = 0;
+	struct ipts_set_mode cmd = { 0 };
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	cmd.mode = mode;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_SET_MODE, &cmd, sizeof(cmd));
+	if (ret) {
+		dev_err(ipts->dev, "SET_MODE: send failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_SET_MODE, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "SET_MODE: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "SET_MODE: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	return 0;
+}
+
+static int ipts_control_set_mem_window(struct ipts_context *ipts, struct ipts_resources *res)
+{
+	int ret = 0;
+	struct ipts_mem_window cmd = { 0 };
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!res)
+		return -EFAULT;
+
+	for (int i = 0; i < IPTS_BUFFERS; i++) {
+		cmd.data_addr_lower[i] = lower_32_bits(res->data[i].dma_address);
+		cmd.data_addr_upper[i] = upper_32_bits(res->data[i].dma_address);
+		cmd.feedback_addr_lower[i] = lower_32_bits(res->feedback[i].dma_address);
+		cmd.feedback_addr_upper[i] = upper_32_bits(res->feedback[i].dma_address);
+	}
+
+	cmd.workqueue_addr_lower = lower_32_bits(res->workqueue.dma_address);
+	cmd.workqueue_addr_upper = upper_32_bits(res->workqueue.dma_address);
+
+	cmd.doorbell_addr_lower = lower_32_bits(res->doorbell.dma_address);
+	cmd.doorbell_addr_upper = upper_32_bits(res->doorbell.dma_address);
+
+	cmd.hid2me_addr_lower = lower_32_bits(res->hid2me.dma_address);
+	cmd.hid2me_addr_upper = upper_32_bits(res->hid2me.dma_address);
+
+	cmd.workqueue_size = IPTS_WORKQUEUE_SIZE;
+	cmd.workqueue_item_size = IPTS_WORKQUEUE_ITEM_SIZE;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_SET_MEM_WINDOW, &cmd, sizeof(cmd));
+	if (ret) {
+		dev_err(ipts->dev, "SET_MEM_WINDOW: send failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_SET_MEM_WINDOW, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "SET_MEM_WINDOW: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "SET_MEM_WINDOW: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	return 0;
+}
+
+static int ipts_control_get_descriptor(struct ipts_context *ipts)
+{
+	int ret = 0;
+	struct ipts_data_header *header = NULL;
+	struct ipts_get_descriptor cmd = { 0 };
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!ipts->resources.descriptor.address)
+		return -EFAULT;
+
+	memset(ipts->resources.descriptor.address, 0, ipts->resources.descriptor.size);
+
+	cmd.addr_lower = lower_32_bits(ipts->resources.descriptor.dma_address);
+	cmd.addr_upper = upper_32_bits(ipts->resources.descriptor.dma_address);
+	cmd.magic = 8;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_GET_DESCRIPTOR, &cmd, sizeof(cmd));
+	if (ret) {
+		dev_err(ipts->dev, "GET_DESCRIPTOR: send failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_GET_DESCRIPTOR, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "GET_DESCRIPTOR: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "GET_DESCRIPTOR: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	header = (struct ipts_data_header *)ipts->resources.descriptor.address;
+
+	if (header->type == IPTS_DATA_TYPE_DESCRIPTOR) {
+		ipts->descriptor.address = &header->data[8];
+		ipts->descriptor.size = header->size - 8;
+
+		return 0;
+	}
+
+	return -ENODATA;
+}
+
+int ipts_control_request_flush(struct ipts_context *ipts)
+{
+	int ret = 0;
+	struct ipts_quiesce_io cmd = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_QUIESCE_IO, &cmd, sizeof(cmd));
+	if (ret)
+		dev_err(ipts->dev, "QUIESCE_IO: send failed: %d\n", ret);
+
+	return ret;
+}
+
+int ipts_control_wait_flush(struct ipts_context *ipts)
+{
+	int ret = 0;
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_QUIESCE_IO, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "QUIESCE_IO: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	if (rsp.status == IPTS_STATUS_TIMEOUT)
+		return -EAGAIN;
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "QUIESCE_IO: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	return 0;
+}
+
+int ipts_control_request_data(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_READY_FOR_DATA, NULL, 0);
+	if (ret)
+		dev_err(ipts->dev, "READY_FOR_DATA: send failed: %d\n", ret);
+
+	return ret;
+}
+
+int ipts_control_wait_data(struct ipts_context *ipts, bool shutdown)
+{
+	int ret = 0;
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!shutdown)
+		ret = ipts_cmd_recv_timeout(ipts, IPTS_CMD_READY_FOR_DATA, &rsp, 0);
+	else
+		ret = ipts_cmd_recv(ipts, IPTS_CMD_READY_FOR_DATA, &rsp);
+
+	if (ret) {
+		if (ret != -EAGAIN)
+			dev_err(ipts->dev, "READY_FOR_DATA: recv failed: %d\n", ret);
+
+		return ret;
+	}
+
+	/*
+	 * During shutdown, it is possible that the sensor has already been disabled.
+	 */
+	if (rsp.status == IPTS_STATUS_SENSOR_DISABLED)
+		return 0;
+
+	if (rsp.status == IPTS_STATUS_TIMEOUT)
+		return -EAGAIN;
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "READY_FOR_DATA: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	return 0;
+}
+
+int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer)
+{
+	int ret = 0;
+	struct ipts_feedback cmd = { 0 };
+	struct ipts_response rsp = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	cmd.buffer = buffer;
+
+	ret = ipts_cmd_send(ipts, IPTS_CMD_FEEDBACK, &cmd, sizeof(cmd));
+	if (ret) {
+		dev_err(ipts->dev, "FEEDBACK: send failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_cmd_recv(ipts, IPTS_CMD_FEEDBACK, &rsp);
+	if (ret) {
+		dev_err(ipts->dev, "FEEDBACK: recv failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * We don't know what feedback data looks like so we are sending zeros.
+	 * See also ipts_control_refill_buffer.
+	 */
+	if (rsp.status == IPTS_STATUS_INVALID_PARAMS)
+		return 0;
+
+	if (rsp.status != IPTS_STATUS_SUCCESS) {
+		dev_err(ipts->dev, "FEEDBACK: cmd failed: %d\n", rsp.status);
+		return -EBADR;
+	}
+
+	return 0;
+}
+
+int ipts_control_hid2me_feedback(struct ipts_context *ipts, enum ipts_feedback_cmd_type cmd,
+				 enum ipts_feedback_data_type type, void *data, size_t size)
+{
+	struct ipts_feedback_header *header = NULL;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!ipts->resources.hid2me.address)
+		return -EFAULT;
+
+	memset(ipts->resources.hid2me.address, 0, ipts->resources.hid2me.size);
+	header = (struct ipts_feedback_header *)ipts->resources.hid2me.address;
+
+	header->cmd_type = cmd;
+	header->data_type = type;
+	header->size = size;
+	header->buffer = IPTS_HID2ME_BUFFER;
+
+	if (size + sizeof(*header) > ipts->resources.hid2me.size)
+		return -EINVAL;
+
+	if (data && size > 0)
+		memcpy(header->payload, data, size);
+
+	return ipts_control_send_feedback(ipts, IPTS_HID2ME_BUFFER);
+}
+
+static inline int ipts_control_reset_sensor(struct ipts_context *ipts)
+{
+	return ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_SOFT_RESET,
+					    IPTS_FEEDBACK_DATA_TYPE_VENDOR, NULL, 0);
+}
+
+int ipts_control_start(struct ipts_context *ipts)
+{
+	int ret = 0;
+	struct ipts_device_info info = { 0 };
+
+	if (!ipts)
+		return -EFAULT;
+
+	dev_info(ipts->dev, "Starting IPTS\n");
+
+	ret = ipts_control_get_device_info(ipts, &info);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to get device info: %d\n", ret);
+		return ret;
+	}
+
+	ipts->info = info;
+
+	ret = ipts_resources_init(&ipts->resources, ipts->dev, info.data_size, info.feedback_size);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to allocate buffers: %d", ret);
+		return ret;
+	}
+
+	dev_info(ipts->dev, "IPTS EDS Version: %d\n", info.intf_eds);
+
+	/*
+	 * Handle newer devices
+	 */
+	if (info.intf_eds > 1) {
+		/*
+		 * Fetching the descriptor will only work on newer devices.
+		 * For older devices, a fallback descriptor will be used.
+		 */
+		ret = ipts_control_get_descriptor(ipts);
+		if (ret) {
+			dev_err(ipts->dev, "Failed to fetch HID descriptor: %d\n", ret);
+			return ret;
+		}
+
+		/*
+		 * Newer devices can be directly initialized in doorbell mode.
+		 */
+		ipts->mode = IPTS_MODE_DOORBELL;
+	}
+
+	ret = ipts_control_set_mode(ipts, ipts->mode);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to set mode: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_control_set_mem_window(ipts, &ipts->resources);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to set memory window: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_receiver_start(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to start receiver: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_control_request_data(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to request data: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_hid_init(ipts, info);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to initialize HID device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int _ipts_control_stop(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	dev_info(ipts->dev, "Stopping IPTS\n");
+
+	ret = ipts_receiver_stop(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to stop receiver: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_control_reset_sensor(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to reset sensor: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_resources_free(&ipts->resources);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to free resources: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ipts_control_stop(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	ret = _ipts_control_stop(ipts);
+	if (ret)
+		return ret;
+
+	ret = ipts_hid_free(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to free HID device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ipts_control_restart(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	ret = _ipts_control_stop(ipts);
+	if (ret)
+		return ret;
+
+	/*
+	 * Give the sensor some time to come back from resetting
+	 */
+	msleep(1000);
+
+	ret = ipts_control_start(ipts);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/hid/ipts/control.h b/drivers/hid/ipts/control.h
new file mode 100644
index 000000000000..744bb92d682a
--- /dev/null
+++ b/drivers/hid/ipts/control.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_CONTROL_H
+#define IPTS_CONTROL_H
+
+#include <linux/types.h>
+
+#include "context.h"
+#include "spec-data.h"
+#include "spec-device.h"
+
+/*
+ * ipts_control_request_flush() - Stop the data flow.
+ * @ipts: The IPTS driver context.
+ *
+ * Runs the command to stop the data flow on the device.
+ * All outstanding data needs to be acknowledged using feedback before the command will return.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_request_flush(struct ipts_context *ipts);
+
+/*
+ * ipts_control_wait_flush() - Wait until data flow has been stopped.
+ * @ipts: The IPTS driver context.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_wait_flush(struct ipts_context *ipts);
+
+/*
+ * ipts_control_wait_flush() - Notify the device that the driver can receive new data.
+ * @ipts: The IPTS driver context.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_request_data(struct ipts_context *ipts);
+
+/*
+ * ipts_control_wait_data() - Wait until new data is available.
+ * @ipts: The IPTS driver context.
+ * @block: Whether to block execution until data is available.
+ *
+ * In doorbell mode, this function will never return while the data flow is active. Instead,
+ * the doorbell will be incremented when new data is available.
+ *
+ * Returns: 0 on success, <0 on error, -EAGAIN if no data is available.
+ */
+int ipts_control_wait_data(struct ipts_context *ipts, bool block);
+
+/*
+ * ipts_control_send_feedback() - Submits a feedback buffer to the device.
+ * @ipts: The IPTS driver context.
+ * @buffer: The ID of the buffer containing feedback data.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer);
+
+/*
+ * ipts_control_hid2me_feedback() - Sends HID2ME feedback, a special type of feedback.
+ * @ipts: The IPTS driver context.
+ * @cmd: The command that will be run on the device.
+ * @type: The type of the payload that is sent to the device.
+ * @data: The payload of the feedback command.
+ * @size: The size of the payload.
+ *
+ * HID2ME feedback is a special type of feedback, because it allows interfacing with
+ * the HID API of the device at any moment, without requiring a buffer that has to
+ * be acknowledged.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_hid2me_feedback(struct ipts_context *ipts, enum ipts_feedback_cmd_type cmd,
+				 enum ipts_feedback_data_type type, void *data, size_t size);
+
+/*
+ * ipts_control_refill_buffer() - Acknowledges that data in a buffer has been processed.
+ * @ipts: The IPTS driver context.
+ * @buffer: The buffer that has been processed and can be refilled.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+static inline int ipts_control_refill_buffer(struct ipts_context *ipts, u32 buffer)
+{
+	/*
+	 * IPTS expects structured data in the feedback buffer matching the buffer that will be
+	 * refilled. We don't know what that data looks like, so we just keep the buffer empty.
+	 * This results in an INVALID_PARAMS error, but the buffer gets refilled without an issue.
+	 * Sending a minimal structure with the buffer ID fixes the error, but breaks refilling
+	 * the buffers on some devices.
+	 */
+
+	return ipts_control_send_feedback(ipts, buffer);
+}
+
+/*
+ * ipts_control_start() - Initialized the device and starts the data flow.
+ * @ipts: The IPTS driver context.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_start(struct ipts_context *ipts);
+
+/*
+ * ipts_control_stop() - Stops the data flow and resets the device.
+ * @ipts: The IPTS driver context.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_stop(struct ipts_context *ipts);
+
+/*
+ * ipts_control_restart() - Stops the device and starts it again.
+ * @ipts: The IPTS driver context.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_control_restart(struct ipts_context *ipts);
+
+#endif /* IPTS_CONTROL_H */
diff --git a/drivers/hid/ipts/desc.h b/drivers/hid/ipts/desc.h
new file mode 100644
index 000000000000..c058974a03a1
--- /dev/null
+++ b/drivers/hid/ipts/desc.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2022-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_DESC_H
+#define IPTS_DESC_H
+
+#include <linux/types.h>
+
+#define IPTS_HID_REPORT_SINGLETOUCH 64
+#define IPTS_HID_REPORT_DATA	    65
+#define IPTS_HID_REPORT_SET_MODE    66
+
+#define IPTS_HID_REPORT_DATA_SIZE 7485
+
+/*
+ * HID descriptor for singletouch data.
+ * This descriptor should be present on all IPTS devices.
+ */
+static const u8 ipts_singletouch_descriptor[] = {
+	0x05, 0x0D,	  /*  Usage Page (Digitizer),            */
+	0x09, 0x04,	  /*  Usage (Touchscreen),               */
+	0xA1, 0x01,	  /*  Collection (Application),          */
+	0x85, 0x40,	  /*      Report ID (64),                */
+	0x09, 0x42,	  /*      Usage (Tip Switch),            */
+	0x15, 0x00,	  /*      Logical Minimum (0),           */
+	0x25, 0x01,	  /*      Logical Maximum (1),           */
+	0x75, 0x01,	  /*      Report Size (1),               */
+	0x95, 0x01,	  /*      Report Count (1),              */
+	0x81, 0x02,	  /*      Input (Variable),              */
+	0x95, 0x07,	  /*      Report Count (7),              */
+	0x81, 0x03,	  /*      Input (Constant, Variable),    */
+	0x05, 0x01,	  /*      Usage Page (Desktop),          */
+	0x09, 0x30,	  /*      Usage (X),                     */
+	0x75, 0x10,	  /*      Report Size (16),              */
+	0x95, 0x01,	  /*      Report Count (1),              */
+	0xA4,		  /*      Push,                          */
+	0x55, 0x0E,	  /*      Unit Exponent (14),            */
+	0x65, 0x11,	  /*      Unit (Centimeter),             */
+	0x46, 0x76, 0x0B, /*      Physical Maximum (2934),       */
+	0x26, 0xFF, 0x7F, /*      Logical Maximum (32767),       */
+	0x81, 0x02,	  /*      Input (Variable),              */
+	0x09, 0x31,	  /*      Usage (Y),                     */
+	0x46, 0x74, 0x06, /*      Physical Maximum (1652),       */
+	0x26, 0xFF, 0x7F, /*      Logical Maximum (32767),       */
+	0x81, 0x02,	  /*      Input (Variable),              */
+	0xB4,		  /*      Pop,                           */
+	0xC0,		  /*  End Collection                     */
+};
+
+/*
+ * Fallback HID descriptor for older devices that do not have
+ * the ability to query their HID descriptor.
+ */
+static const u8 ipts_fallback_descriptor[] = {
+	0x05, 0x0D,	  /*  Usage Page (Digitizer),            */
+	0x09, 0x0F,	  /*  Usage (Capacitive Hm Digitizer),   */
+	0xA1, 0x01,	  /*  Collection (Application),          */
+	0x85, 0x41,	  /*      Report ID (65),                */
+	0x09, 0x56,	  /*      Usage (Scan Time),             */
+	0x95, 0x01,	  /*      Report Count (1),              */
+	0x75, 0x10,	  /*      Report Size (16),              */
+	0x81, 0x02,	  /*      Input (Variable),              */
+	0x09, 0x61,	  /*      Usage (Gesture Char Quality),  */
+	0x75, 0x08,	  /*      Report Size (8),               */
+	0x96, 0x3D, 0x1D, /*      Report Count (7485),           */
+	0x81, 0x03,	  /*      Input (Constant, Variable),    */
+	0x85, 0x42,	  /*      Report ID (66),                */
+	0x06, 0x00, 0xFF, /*      Usage Page (FF00h),            */
+	0x09, 0xC8,	  /*      Usage (C8h),                   */
+	0x75, 0x08,	  /*      Report Size (8),               */
+	0x95, 0x01,	  /*      Report Count (1),              */
+	0xB1, 0x02,	  /*      Feature (Variable),            */
+	0xC0,		  /*  End Collection,                    */
+};
+
+#endif /* IPTS_DESC_H */
diff --git a/drivers/hid/ipts/hid.c b/drivers/hid/ipts/hid.c
new file mode 100644
index 000000000000..6782394e8dde
--- /dev/null
+++ b/drivers/hid/ipts/hid.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2022-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/completion.h>
+#include <linux/gfp.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "context.h"
+#include "control.h"
+#include "desc.h"
+#include "hid.h"
+#include "spec-data.h"
+#include "spec-device.h"
+#include "spec-hid.h"
+
+static int ipts_hid_start(struct hid_device *hid)
+{
+	return 0;
+}
+
+static void ipts_hid_stop(struct hid_device *hid)
+{
+}
+
+static int ipts_hid_switch_mode(struct ipts_context *ipts, enum ipts_mode mode)
+{
+	if (!ipts)
+		return -EFAULT;
+
+	if (ipts->mode == mode)
+		return 0;
+
+	/*
+	 * This is only allowed on older devices.
+	 */
+	if (ipts->info.intf_eds > 1)
+		return 0;
+
+	ipts->mode = mode;
+	return ipts_control_restart(ipts);
+}
+
+static int ipts_hid_parse(struct hid_device *hid)
+{
+	int ret = 0;
+	struct ipts_context *ipts = NULL;
+
+	bool has_native_descriptor = false;
+
+	u8 *buffer = NULL;
+	size_t size = 0;
+
+	if (!hid)
+		return -ENODEV;
+
+	ipts = hid->driver_data;
+
+	if (!ipts)
+		return -EFAULT;
+
+	size = sizeof(ipts_singletouch_descriptor);
+	has_native_descriptor = ipts->descriptor.address && ipts->descriptor.size > 0;
+
+	if (has_native_descriptor)
+		size += ipts->descriptor.size;
+	else
+		size += sizeof(ipts_fallback_descriptor);
+
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	memcpy(buffer, ipts_singletouch_descriptor, sizeof(ipts_singletouch_descriptor));
+
+	if (has_native_descriptor) {
+		memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts->descriptor.address,
+		       ipts->descriptor.size);
+	} else {
+		memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts_fallback_descriptor,
+		       sizeof(ipts_fallback_descriptor));
+	}
+
+	ret = hid_parse_report(hid, buffer, size);
+	kfree(buffer);
+
+	if (ret) {
+		dev_err(ipts->dev, "Failed to parse HID descriptor: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ipts_hid_get_feature(struct ipts_context *ipts, unsigned char reportnum, __u8 *buf,
+				size_t size, enum ipts_feedback_data_type type)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buf)
+		return -EFAULT;
+
+	mutex_lock(&ipts->feature_lock);
+
+	memset(buf, 0, size);
+	buf[0] = reportnum;
+
+	memset(&ipts->feature_report, 0, sizeof(ipts->feature_report));
+	reinit_completion(&ipts->feature_event);
+
+	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buf, size);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
+		goto out;
+	}
+
+	ret = wait_for_completion_timeout(&ipts->feature_event, msecs_to_jiffies(5000));
+	if (ret == 0) {
+		dev_warn(ipts->dev, "GET_FEATURES timed out!\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!ipts->feature_report.address) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (ipts->feature_report.size > size) {
+		ret = -ETOOSMALL;
+		goto out;
+	}
+
+	ret = ipts->feature_report.size;
+	memcpy(buf, ipts->feature_report.address, ipts->feature_report.size);
+
+out:
+	mutex_unlock(&ipts->feature_lock);
+	return ret;
+}
+
+static int ipts_hid_set_feature(struct ipts_context *ipts, unsigned char reportnum, __u8 *buf,
+				size_t size, enum ipts_feedback_data_type type)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buf)
+		return -EFAULT;
+
+	buf[0] = reportnum;
+
+	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buf, size);
+	if (ret)
+		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
+
+	return ret;
+}
+
+static int ipts_hid_raw_request(struct hid_device *hid, unsigned char reportnum, __u8 *buf,
+				size_t size, unsigned char rtype, int reqtype)
+{
+	int ret = 0;
+	struct ipts_context *ipts = NULL;
+
+	enum ipts_feedback_data_type type = IPTS_FEEDBACK_DATA_TYPE_VENDOR;
+
+	if (!hid)
+		return -ENODEV;
+
+	ipts = hid->driver_data;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buf)
+		return -EFAULT;
+
+	if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT)
+		type = IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT;
+	else if (rtype == HID_FEATURE_REPORT && reqtype == HID_REQ_GET_REPORT)
+		type = IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES;
+	else if (rtype == HID_FEATURE_REPORT && reqtype == HID_REQ_SET_REPORT)
+		type = IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES;
+	else
+		return -EIO;
+
+	// Implemente mode switching report for older devices without native HID support
+	if (type == IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES && reportnum == IPTS_HID_REPORT_SET_MODE) {
+		ret = ipts_hid_switch_mode(ipts, buf[1]);
+		if (ret) {
+			dev_err(ipts->dev, "Failed to switch modes: %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (reqtype == HID_REQ_GET_REPORT)
+		return ipts_hid_get_feature(ipts, reportnum, buf, size, type);
+	else
+		return ipts_hid_set_feature(ipts, reportnum, buf, size, type);
+}
+
+static int ipts_hid_output_report(struct hid_device *hid, __u8 *data, size_t size)
+{
+	struct ipts_context *ipts = NULL;
+
+	if (!hid)
+		return -ENODEV;
+
+	ipts = hid->driver_data;
+
+	return ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE,
+					    IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT, data, size);
+}
+
+static struct hid_ll_driver ipts_hid_driver = {
+	.start = ipts_hid_start,
+	.stop = ipts_hid_stop,
+	.open = ipts_hid_start,
+	.close = ipts_hid_stop,
+	.parse = ipts_hid_parse,
+	.raw_request = ipts_hid_raw_request,
+	.output_report = ipts_hid_output_report,
+};
+
+int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
+{
+	int ret = 0;
+	u8 *temp = NULL;
+	struct ipts_hid_header *frame = NULL;
+	struct ipts_data_header *header = NULL;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!ipts->hid)
+		return -ENODEV;
+
+	header = (struct ipts_data_header *)ipts->resources.data[buffer].address;
+
+	if (!header)
+		return -EFAULT;
+
+	if (header->size == 0)
+		return 0;
+
+	if (header->type == IPTS_DATA_TYPE_HID)
+		return hid_input_report(ipts->hid, HID_INPUT_REPORT, header->data, header->size, 1);
+
+	if (header->type == IPTS_DATA_TYPE_GET_FEATURES) {
+		ipts->feature_report.address = header->data;
+		ipts->feature_report.size = header->size;
+
+		complete_all(&ipts->feature_event);
+		return 0;
+	}
+
+	if (header->type != IPTS_DATA_TYPE_FRAME)
+		return 0;
+
+	if (header->size + 3 + sizeof(struct ipts_hid_header) > IPTS_HID_REPORT_DATA_SIZE)
+		return -ERANGE;
+
+	temp = kzalloc(IPTS_HID_REPORT_DATA_SIZE, GFP_KERNEL);
+	if (!temp)
+		return -ENOMEM;
+
+	/*
+	 * Synthesize a HID report matching the devices that natively send HID reports
+	 */
+	temp[0] = IPTS_HID_REPORT_DATA;
+
+	frame = (struct ipts_hid_header *)&temp[3];
+	frame->type = IPTS_HID_FRAME_TYPE_RAW;
+	frame->size = header->size + sizeof(*frame);
+
+	memcpy(frame->data, header->data, header->size);
+
+	ret = hid_input_report(ipts->hid, HID_INPUT_REPORT, temp, IPTS_HID_REPORT_DATA_SIZE, 1);
+	kfree(temp);
+
+	return ret;
+}
+
+int ipts_hid_init(struct ipts_context *ipts, struct ipts_device_info info)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (ipts->hid)
+		return 0;
+
+	ipts->hid = hid_allocate_device();
+	if (IS_ERR(ipts->hid)) {
+		int err = PTR_ERR(ipts->hid);
+
+		dev_err(ipts->dev, "Failed to allocate HID device: %d\n", err);
+		return err;
+	}
+
+	ipts->hid->driver_data = ipts;
+	ipts->hid->dev.parent = ipts->dev;
+	ipts->hid->ll_driver = &ipts_hid_driver;
+
+	ipts->hid->vendor = info.vendor;
+	ipts->hid->product = info.product;
+	ipts->hid->group = HID_GROUP_MULTITOUCH;
+
+	snprintf(ipts->hid->name, sizeof(ipts->hid->name), "IPTS %04X:%04X", info.vendor,
+		 info.product);
+
+	ret = hid_add_device(ipts->hid);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to add HID device: %d\n", ret);
+		ipts_hid_free(ipts);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ipts_hid_free(struct ipts_context *ipts)
+{
+	if (!ipts)
+		return -EFAULT;
+
+	if (!ipts->hid)
+		return 0;
+
+	hid_destroy_device(ipts->hid);
+	ipts->hid = NULL;
+
+	return 0;
+}
diff --git a/drivers/hid/ipts/hid.h b/drivers/hid/ipts/hid.h
new file mode 100644
index 000000000000..62bf3cd48608
--- /dev/null
+++ b/drivers/hid/ipts/hid.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2022-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_HID_H
+#define IPTS_HID_H
+
+#include <linux/types.h>
+
+#include "context.h"
+#include "spec-device.h"
+
+int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer);
+
+int ipts_hid_init(struct ipts_context *ipts, struct ipts_device_info info);
+int ipts_hid_free(struct ipts_context *ipts);
+
+#endif /* IPTS_HID_H */
diff --git a/drivers/hid/ipts/main.c b/drivers/hid/ipts/main.c
new file mode 100644
index 000000000000..0f20c6c08c38
--- /dev/null
+++ b/drivers/hid/ipts/main.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include "context.h"
+#include "control.h"
+#include "mei.h"
+#include "receiver.h"
+#include "spec-device.h"
+
+/*
+ * The MEI client ID for IPTS functionality.
+ */
+#define IPTS_ID UUID_LE(0x3e8d0870, 0x271a, 0x4208, 0x8e, 0xb5, 0x9a, 0xcb, 0x94, 0x02, 0xae, 0x04)
+
+static int ipts_set_dma_mask(struct mei_cl_device *cldev)
+{
+	if (!cldev)
+		return -EFAULT;
+
+	if (!dma_coerce_mask_and_coherent(&cldev->dev, DMA_BIT_MASK(64)))
+		return 0;
+
+	return dma_coerce_mask_and_coherent(&cldev->dev, DMA_BIT_MASK(32));
+}
+
+static int ipts_probe(struct mei_cl_device *cldev, const struct mei_cl_device_id *id)
+{
+	int ret = 0;
+	struct ipts_context *ipts = NULL;
+
+	if (!cldev)
+		return -EFAULT;
+
+	ret = ipts_set_dma_mask(cldev);
+	if (ret) {
+		dev_err(&cldev->dev, "Failed to set DMA mask for IPTS: %d\n", ret);
+		return ret;
+	}
+
+	ret = mei_cldev_enable(cldev);
+	if (ret) {
+		dev_err(&cldev->dev, "Failed to enable MEI device: %d\n", ret);
+		return ret;
+	}
+
+	ipts = devm_kzalloc(&cldev->dev, sizeof(*ipts), GFP_KERNEL);
+	if (!ipts) {
+		mei_cldev_disable(cldev);
+		return -ENOMEM;
+	}
+
+	ret = ipts_mei_init(&ipts->mei, cldev);
+	if (ret) {
+		dev_err(&cldev->dev, "Failed to init MEI bus logic: %d\n", ret);
+		return ret;
+	}
+
+	ipts->dev = &cldev->dev;
+	ipts->mode = IPTS_MODE_EVENT;
+
+	mutex_init(&ipts->feature_lock);
+	init_completion(&ipts->feature_event);
+
+	mei_cldev_set_drvdata(cldev, ipts);
+
+	ret = ipts_control_start(ipts);
+	if (ret) {
+		dev_err(&cldev->dev, "Failed to start IPTS: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ipts_remove(struct mei_cl_device *cldev)
+{
+	int ret = 0;
+	struct ipts_context *ipts = NULL;
+
+	if (!cldev) {
+		pr_err("MEI device is NULL!");
+		return;
+	}
+
+	ipts = mei_cldev_get_drvdata(cldev);
+
+	ret = ipts_control_stop(ipts);
+	if (ret)
+		dev_err(&cldev->dev, "Failed to stop IPTS: %d\n", ret);
+
+	mei_cldev_disable(cldev);
+}
+
+static struct mei_cl_device_id ipts_device_id_table[] = {
+	{ .uuid = IPTS_ID, .version = MEI_CL_VERSION_ANY },
+	{},
+};
+MODULE_DEVICE_TABLE(mei, ipts_device_id_table);
+
+static struct mei_cl_driver ipts_driver = {
+	.id_table = ipts_device_id_table,
+	.name = "ipts",
+	.probe = ipts_probe,
+	.remove = ipts_remove,
+};
+module_mei_cl_driver(ipts_driver);
+
+MODULE_DESCRIPTION("IPTS touchscreen driver");
+MODULE_AUTHOR("Dorian Stoll <dorian.stoll@tmsp.io>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/ipts/mei.c b/drivers/hid/ipts/mei.c
new file mode 100644
index 000000000000..26666fd99b0c
--- /dev/null
+++ b/drivers/hid/ipts/mei.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/printk.h>
+#include <linux/rwsem.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include "context.h"
+#include "mei.h"
+
+static void locked_list_add(struct list_head *new, struct list_head *head,
+			    struct rw_semaphore *lock)
+{
+	down_write(lock);
+	list_add(new, head);
+	up_write(lock);
+}
+
+static void locked_list_del(struct list_head *entry, struct rw_semaphore *lock)
+{
+	down_write(lock);
+	list_del(entry);
+	up_write(lock);
+}
+
+static void ipts_mei_incoming(struct mei_cl_device *cldev)
+{
+	ssize_t ret = 0;
+	struct ipts_mei_message *entry = NULL;
+	struct ipts_context *ipts = NULL;
+
+	if (!cldev) {
+		pr_err("MEI device is NULL!");
+		return;
+	}
+
+	ipts = mei_cldev_get_drvdata(cldev);
+	if (!ipts) {
+		pr_err("IPTS driver context is NULL!");
+		return;
+	}
+
+	entry = devm_kzalloc(ipts->dev, sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return;
+
+	INIT_LIST_HEAD(&entry->list);
+
+	do {
+		ret = mei_cldev_recv(cldev, (u8 *)&entry->rsp, sizeof(entry->rsp));
+	} while (ret == -EINTR);
+
+	if (ret < 0) {
+		dev_err(ipts->dev, "Error while reading response: %ld\n", ret);
+		return;
+	}
+
+	if (ret == 0) {
+		dev_err(ipts->dev, "Received empty response\n");
+		return;
+	}
+
+	locked_list_add(&entry->list, &ipts->mei.messages, &ipts->mei.message_lock);
+	wake_up_all(&ipts->mei.message_queue);
+}
+
+static int ipts_mei_search(struct ipts_mei *mei, enum ipts_command_code code,
+			   struct ipts_response *rsp)
+{
+	struct ipts_mei_message *entry = NULL;
+
+	if (!mei)
+		return -EFAULT;
+
+	if (!rsp)
+		return -EFAULT;
+
+	down_read(&mei->message_lock);
+
+	/*
+	 * Iterate over the list of received messages, and check if there is one
+	 * matching the requested command code.
+	 */
+	list_for_each_entry(entry, &mei->messages, list) {
+		if (entry->rsp.cmd == code)
+			break;
+	}
+
+	up_read(&mei->message_lock);
+
+	/*
+	 * If entry is not the list head, this means that the loop above has been stopped early,
+	 * and that we found a matching element. We drop the message from the list and return it.
+	 */
+	if (!list_entry_is_head(entry, &mei->messages, list)) {
+		locked_list_del(&entry->list, &mei->message_lock);
+
+		*rsp = entry->rsp;
+		devm_kfree(&mei->cldev->dev, entry);
+
+		return 0;
+	}
+
+	return -EAGAIN;
+}
+
+int ipts_mei_recv(struct ipts_mei *mei, enum ipts_command_code code, struct ipts_response *rsp,
+		  u64 timeout)
+{
+	int ret = 0;
+
+	if (!mei)
+		return -EFAULT;
+
+	/*
+	 * A timeout of 0 means check and return immideately.
+	 */
+	if (timeout == 0)
+		return ipts_mei_search(mei, code, rsp);
+
+	/*
+	 * A timeout of less than 0 means to wait forever.
+	 */
+	if (timeout < 0) {
+		wait_event(mei->message_queue, ipts_mei_search(mei, code, rsp) == 0);
+		return 0;
+	}
+
+	ret = wait_event_timeout(mei->message_queue, ipts_mei_search(mei, code, rsp) == 0,
+				 msecs_to_jiffies(timeout));
+
+	if (ret > 0)
+		return 0;
+
+	return -EAGAIN;
+}
+
+int ipts_mei_send(struct ipts_mei *mei, void *data, size_t length)
+{
+	int ret = 0;
+
+	if (!mei)
+		return -EFAULT;
+
+	if (!mei->cldev)
+		return -EFAULT;
+
+	if (!data)
+		return -EFAULT;
+
+	do {
+		ret = mei_cldev_send(mei->cldev, (u8 *)data, length);
+	} while (ret == -EINTR);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int ipts_mei_init(struct ipts_mei *mei, struct mei_cl_device *cldev)
+{
+	if (!mei)
+		return -EFAULT;
+
+	if (!cldev)
+		return -EFAULT;
+
+	mei->cldev = cldev;
+
+	INIT_LIST_HEAD(&mei->messages);
+	init_waitqueue_head(&mei->message_queue);
+	init_rwsem(&mei->message_lock);
+
+	mei_cldev_register_rx_cb(cldev, ipts_mei_incoming);
+
+	return 0;
+}
diff --git a/drivers/hid/ipts/mei.h b/drivers/hid/ipts/mei.h
new file mode 100644
index 000000000000..eadacae54c40
--- /dev/null
+++ b/drivers/hid/ipts/mei.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_MEI_H
+#define IPTS_MEI_H
+
+#include <linux/list.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/rwsem.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include "spec-device.h"
+
+struct ipts_mei_message {
+	struct list_head list;
+	struct ipts_response rsp;
+};
+
+struct ipts_mei {
+	struct mei_cl_device *cldev;
+
+	struct list_head messages;
+
+	wait_queue_head_t message_queue;
+	struct rw_semaphore message_lock;
+};
+
+/*
+ * ipts_mei_recv() - Receive data from a MEI device.
+ * @mei: The IPTS MEI device context.
+ * @code: The IPTS command code to look for.
+ * @rsp: The address that the received data will be copied to.
+ * @timeout: How many milliseconds the function will wait at most.
+ *
+ * A negative timeout means to wait forever.
+ *
+ * Returns: 0 on success, <0 on error, -EAGAIN if no response has been received.
+ */
+int ipts_mei_recv(struct ipts_mei *mei, enum ipts_command_code code, struct ipts_response *rsp,
+		  u64 timeout);
+
+/*
+ * ipts_mei_send() - Send data to a MEI device.
+ * @ipts: The IPTS MEI device context.
+ * @data: The data to send.
+ * @size: The size of the data.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_mei_send(struct ipts_mei *mei, void *data, size_t length);
+
+/*
+ * ipts_mei_init() - Initialize the MEI device context.
+ * @mei: The MEI device context to initialize.
+ * @cldev: The MEI device the context will be bound to.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_mei_init(struct ipts_mei *mei, struct mei_cl_device *cldev);
+
+#endif /* IPTS_MEI_H */
diff --git a/drivers/hid/ipts/receiver.c b/drivers/hid/ipts/receiver.c
new file mode 100644
index 000000000000..77234f9e0e17
--- /dev/null
+++ b/drivers/hid/ipts/receiver.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kthread.h>
+#include <linux/time64.h>
+#include <linux/timekeeping.h>
+#include <linux/types.h>
+
+#include "cmd.h"
+#include "context.h"
+#include "control.h"
+#include "hid.h"
+#include "resources.h"
+#include "spec-device.h"
+#include "thread.h"
+
+static void ipts_receiver_next_doorbell(struct ipts_context *ipts)
+{
+	u32 *doorbell = (u32 *)ipts->resources.doorbell.address;
+	*doorbell = *doorbell + 1;
+}
+
+static u32 ipts_receiver_current_doorbell(struct ipts_context *ipts)
+{
+	u32 *doorbell = (u32 *)ipts->resources.doorbell.address;
+	return *doorbell;
+}
+
+static void ipts_receiver_backoff(time64_t last, u32 n)
+{
+	/*
+	 * If the last change was less than n seconds ago,
+	 * sleep for a shorter period so that new data can be
+	 * processed quickly. If there was no change for more than
+	 * n seconds, sleep longer to avoid wasting CPU cycles.
+	 */
+	if (last + n > ktime_get_seconds())
+		msleep(20);
+	else
+		msleep(200);
+}
+
+static int ipts_receiver_event_loop(struct ipts_thread *thread)
+{
+	int ret = 0;
+	u32 buffer = 0;
+
+	struct ipts_context *ipts = NULL;
+	time64_t last = ktime_get_seconds();
+
+	if (!thread)
+		return -EFAULT;
+
+	ipts = thread->data;
+
+	if (!ipts)
+		return -EFAULT;
+
+	dev_info(ipts->dev, "IPTS running in event mode\n");
+
+	while (!ipts_thread_should_stop(thread)) {
+		for (int i = 0; i < IPTS_BUFFERS; i++) {
+			ret = ipts_control_wait_data(ipts, false);
+			if (ret == -EAGAIN)
+				break;
+
+			if (ret) {
+				dev_err(ipts->dev, "Failed to wait for data: %d\n", ret);
+				continue;
+			}
+
+			buffer = ipts_receiver_current_doorbell(ipts) % IPTS_BUFFERS;
+			ipts_receiver_next_doorbell(ipts);
+
+			ret = ipts_hid_input_data(ipts, buffer);
+			if (ret)
+				dev_err(ipts->dev, "Failed to process buffer: %d\n", ret);
+
+			ret = ipts_control_refill_buffer(ipts, buffer);
+			if (ret)
+				dev_err(ipts->dev, "Failed to send feedback: %d\n", ret);
+
+			ret = ipts_control_request_data(ipts);
+			if (ret)
+				dev_err(ipts->dev, "Failed to request data: %d\n", ret);
+
+			last = ktime_get_seconds();
+		}
+
+		ipts_receiver_backoff(last, 5);
+	}
+
+	ret = ipts_control_request_flush(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to request flush: %d\n", ret);
+		return ret;
+	}
+
+	ret = ipts_control_wait_data(ipts, true);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to wait for data: %d\n", ret);
+
+		if (ret != -EAGAIN)
+			return ret;
+		else
+			return 0;
+	}
+
+	ret = ipts_control_wait_flush(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to wait for flush: %d\n", ret);
+
+		if (ret != -EAGAIN)
+			return ret;
+		else
+			return 0;
+	}
+
+	return 0;
+}
+
+static int ipts_receiver_doorbell_loop(struct ipts_thread *thread)
+{
+	int ret = 0;
+	u32 buffer = 0;
+
+	u32 doorbell = 0;
+	u32 lastdb = 0;
+
+	struct ipts_context *ipts = NULL;
+	time64_t last = ktime_get_seconds();
+
+	if (!thread)
+		return -EFAULT;
+
+	ipts = thread->data;
+
+	if (!ipts)
+		return -EFAULT;
+
+	dev_info(ipts->dev, "IPTS running in doorbell mode\n");
+
+	while (true) {
+		if (ipts_thread_should_stop(thread)) {
+			ret = ipts_control_request_flush(ipts);
+			if (ret) {
+				dev_err(ipts->dev, "Failed to request flush: %d\n", ret);
+				return ret;
+			}
+		}
+
+		doorbell = ipts_receiver_current_doorbell(ipts);
+
+		/*
+		 * After filling up one of the data buffers, IPTS will increment
+		 * the doorbell. The value of the doorbell stands for the *next*
+		 * buffer that IPTS is going to fill.
+		 */
+		while (lastdb != doorbell) {
+			buffer = lastdb % IPTS_BUFFERS;
+
+			ret = ipts_hid_input_data(ipts, buffer);
+			if (ret)
+				dev_err(ipts->dev, "Failed to process buffer: %d\n", ret);
+
+			ret = ipts_control_refill_buffer(ipts, buffer);
+			if (ret)
+				dev_err(ipts->dev, "Failed to send feedback: %d\n", ret);
+
+			last = ktime_get_seconds();
+			lastdb++;
+		}
+
+		if (ipts_thread_should_stop(thread))
+			break;
+
+		ipts_receiver_backoff(last, 5);
+	}
+
+	ret = ipts_control_wait_data(ipts, true);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to wait for data: %d\n", ret);
+
+		if (ret != -EAGAIN)
+			return ret;
+		else
+			return 0;
+	}
+
+	ret = ipts_control_wait_flush(ipts);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to wait for flush: %d\n", ret);
+
+		if (ret != -EAGAIN)
+			return ret;
+		else
+			return 0;
+	}
+
+	return 0;
+}
+
+int ipts_receiver_start(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (ipts->mode == IPTS_MODE_EVENT) {
+		ret = ipts_thread_start(&ipts->receiver_loop, ipts_receiver_event_loop, ipts,
+					"ipts_event");
+	} else if (ipts->mode == IPTS_MODE_DOORBELL) {
+		ret = ipts_thread_start(&ipts->receiver_loop, ipts_receiver_doorbell_loop, ipts,
+					"ipts_doorbell");
+	} else {
+		ret = -EINVAL;
+	}
+
+	if (ret) {
+		dev_err(ipts->dev, "Failed to start receiver loop: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int ipts_receiver_stop(struct ipts_context *ipts)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	ret = ipts_thread_stop(&ipts->receiver_loop);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to stop receiver loop: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/hid/ipts/receiver.h b/drivers/hid/ipts/receiver.h
new file mode 100644
index 000000000000..96070f34fbca
--- /dev/null
+++ b/drivers/hid/ipts/receiver.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_RECEIVER_H
+#define IPTS_RECEIVER_H
+
+#include "context.h"
+
+int ipts_receiver_start(struct ipts_context *ipts);
+int ipts_receiver_stop(struct ipts_context *ipts);
+
+#endif /* IPTS_RECEIVER_H */
diff --git a/drivers/hid/ipts/resources.c b/drivers/hid/ipts/resources.c
new file mode 100644
index 000000000000..80ba5885bb55
--- /dev/null
+++ b/drivers/hid/ipts/resources.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+
+#include "resources.h"
+#include "spec-device.h"
+
+static int ipts_resources_alloc_buffer(struct ipts_buffer *buffer, struct device *dev, size_t size)
+{
+	if (!buffer)
+		return -EFAULT;
+
+	if (buffer->address)
+		return 0;
+
+	buffer->address = dma_alloc_coherent(dev, size, &buffer->dma_address, GFP_KERNEL);
+
+	if (!buffer->address)
+		return -ENOMEM;
+
+	buffer->size = size;
+	buffer->device = dev;
+
+	return 0;
+}
+
+static void ipts_resources_free_buffer(struct ipts_buffer *buffer)
+{
+	if (!buffer->address)
+		return;
+
+	dma_free_coherent(buffer->device, buffer->size, buffer->address, buffer->dma_address);
+
+	buffer->address = NULL;
+	buffer->size = 0;
+
+	buffer->dma_address = 0;
+	buffer->device = NULL;
+}
+
+int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t ds, size_t fs)
+{
+	int ret = 0;
+
+	if (!res)
+		return -EFAULT;
+
+	for (int i = 0; i < IPTS_BUFFERS; i++) {
+		ret = ipts_resources_alloc_buffer(&res->data[i], dev, ds);
+		if (ret)
+			goto err;
+	}
+
+	for (int i = 0; i < IPTS_BUFFERS; i++) {
+		ret = ipts_resources_alloc_buffer(&res->feedback[i], dev, fs);
+		if (ret)
+			goto err;
+	}
+
+	ret = ipts_resources_alloc_buffer(&res->doorbell, dev, sizeof(u32));
+	if (ret)
+		goto err;
+
+	ret = ipts_resources_alloc_buffer(&res->workqueue, dev, sizeof(u32));
+	if (ret)
+		goto err;
+
+	ret = ipts_resources_alloc_buffer(&res->hid2me, dev, fs);
+	if (ret)
+		goto err;
+
+	ret = ipts_resources_alloc_buffer(&res->descriptor, dev, ds + 8);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+
+	ipts_resources_free(res);
+	return ret;
+}
+
+int ipts_resources_free(struct ipts_resources *res)
+{
+	if (!res)
+		return -EFAULT;
+
+	for (int i = 0; i < IPTS_BUFFERS; i++)
+		ipts_resources_free_buffer(&res->data[i]);
+
+	for (int i = 0; i < IPTS_BUFFERS; i++)
+		ipts_resources_free_buffer(&res->feedback[i]);
+
+	ipts_resources_free_buffer(&res->doorbell);
+	ipts_resources_free_buffer(&res->workqueue);
+	ipts_resources_free_buffer(&res->hid2me);
+	ipts_resources_free_buffer(&res->descriptor);
+
+	return 0;
+}
diff --git a/drivers/hid/ipts/resources.h b/drivers/hid/ipts/resources.h
new file mode 100644
index 000000000000..6cbb24a8a054
--- /dev/null
+++ b/drivers/hid/ipts/resources.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_RESOURCES_H
+#define IPTS_RESOURCES_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#include "spec-device.h"
+
+struct ipts_buffer {
+	u8 *address;
+	size_t size;
+
+	dma_addr_t dma_address;
+	struct device *device;
+};
+
+struct ipts_resources {
+	struct ipts_buffer data[IPTS_BUFFERS];
+	struct ipts_buffer feedback[IPTS_BUFFERS];
+
+	struct ipts_buffer doorbell;
+	struct ipts_buffer workqueue;
+	struct ipts_buffer hid2me;
+
+	struct ipts_buffer descriptor;
+};
+
+int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t ds, size_t fs);
+int ipts_resources_free(struct ipts_resources *res);
+
+#endif /* IPTS_RESOURCES_H */
diff --git a/drivers/hid/ipts/spec-data.h b/drivers/hid/ipts/spec-data.h
new file mode 100644
index 000000000000..e8dd98895a7e
--- /dev/null
+++ b/drivers/hid/ipts/spec-data.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_SPEC_DATA_H
+#define IPTS_SPEC_DATA_H
+
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+/**
+ * enum ipts_feedback_cmd_type - Commands that can be executed on the sensor through feedback.
+ */
+enum ipts_feedback_cmd_type {
+	IPTS_FEEDBACK_CMD_TYPE_NONE = 0,
+	IPTS_FEEDBACK_CMD_TYPE_SOFT_RESET = 1,
+	IPTS_FEEDBACK_CMD_TYPE_GOTO_ARMED = 2,
+	IPTS_FEEDBACK_CMD_TYPE_GOTO_SENSING = 3,
+	IPTS_FEEDBACK_CMD_TYPE_GOTO_SLEEP = 4,
+	IPTS_FEEDBACK_CMD_TYPE_GOTO_DOZE = 5,
+	IPTS_FEEDBACK_CMD_TYPE_HARD_RESET = 6,
+};
+
+/**
+ * enum ipts_feedback_data_type - Defines what data a feedback buffer contains.
+ * @IPTS_FEEDBACK_DATA_TYPE_VENDOR:        The buffer contains vendor specific feedback.
+ * @IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES:  The buffer contains a HID set features report.
+ * @IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES:  The buffer contains a HID get features report.
+ * @IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT: The buffer contains a HID output report.
+ * @IPTS_FEEDBACK_DATA_TYPE_STORE_DATA:    The buffer contains calibration data for the sensor.
+ */
+enum ipts_feedback_data_type {
+	IPTS_FEEDBACK_DATA_TYPE_VENDOR = 0,
+	IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES = 1,
+	IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES = 2,
+	IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT = 3,
+	IPTS_FEEDBACK_DATA_TYPE_STORE_DATA = 4,
+};
+
+/**
+ * struct ipts_feedback_header - Header that is prefixed to the data in a feedback buffer.
+ * @cmd_type:   A command that should be executed on the sensor.
+ * @size:       The size of the payload to be written.
+ * @buffer:     The ID of the buffer that contains this feedback data.
+ * @protocol:   The protocol version of the EDS.
+ * @data_type:  The type of data that the buffer contains.
+ * @spi_offset: The offset at which to write the payload data to the sensor.
+ * @payload:    Payload for the feedback command, or 0 if no payload is sent.
+ */
+struct ipts_feedback_header {
+	enum ipts_feedback_cmd_type cmd_type;
+	u32 size;
+	u32 buffer;
+	u32 protocol;
+	enum ipts_feedback_data_type data_type;
+	u32 spi_offset;
+	u8 reserved[40];
+	u8 payload[];
+} __packed;
+
+static_assert(sizeof(struct ipts_feedback_header) == 64);
+
+/**
+ * enum ipts_data_type - Defines what type of data a buffer contains.
+ * @IPTS_DATA_TYPE_FRAME:        Raw data frame.
+ * @IPTS_DATA_TYPE_ERROR:        Error data.
+ * @IPTS_DATA_TYPE_VENDOR:       Vendor specific data.
+ * @IPTS_DATA_TYPE_HID:          A HID report.
+ * @IPTS_DATA_TYPE_GET_FEATURES: The response to a GET_FEATURES HID2ME command.
+ */
+enum ipts_data_type {
+	IPTS_DATA_TYPE_FRAME = 0x00,
+	IPTS_DATA_TYPE_ERROR = 0x01,
+	IPTS_DATA_TYPE_VENDOR = 0x02,
+	IPTS_DATA_TYPE_HID = 0x03,
+	IPTS_DATA_TYPE_GET_FEATURES = 0x04,
+	IPTS_DATA_TYPE_DESCRIPTOR = 0x05,
+};
+
+/**
+ * struct ipts_data_header - Header that is prefixed to the data in a data buffer.
+ * @type: What data the buffer contains.
+ * @size: How much data the buffer contains.
+ * @buffer: Which buffer the data is in.
+ */
+struct ipts_data_header {
+	enum ipts_data_type type;
+	u32 size;
+	u32 buffer;
+	u8 reserved[52];
+	u8 data[];
+} __packed;
+
+static_assert(sizeof(struct ipts_data_header) == 64);
+
+#endif /* IPTS_SPEC_DATA_H */
diff --git a/drivers/hid/ipts/spec-device.h b/drivers/hid/ipts/spec-device.h
new file mode 100644
index 000000000000..93f673d981f7
--- /dev/null
+++ b/drivers/hid/ipts/spec-device.h
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_SPEC_DEVICE_H
+#define IPTS_SPEC_DEVICE_H
+
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+/*
+ * The amount of buffers that IPTS can use for data transfer.
+ */
+#define IPTS_BUFFERS 16
+
+/*
+ * The buffer ID that is used for HID2ME feedback
+ */
+#define IPTS_HID2ME_BUFFER IPTS_BUFFERS
+
+/**
+ * enum ipts_command - Commands that can be sent to the IPTS hardware.
+ * @IPTS_CMD_GET_DEVICE_INFO:  Retrieves vendor information from the device.
+ * @IPTS_CMD_SET_MODE:         Changes the mode that the device will operate in.
+ * @IPTS_CMD_SET_MEM_WINDOW:   Configures memory buffers for passing data between device and driver.
+ * @IPTS_CMD_QUIESCE_IO:       Stops the data flow from the device to the driver.
+ * @IPTS_CMD_READY_FOR_DATA:   Informs the device that the driver is ready to receive data.
+ * @IPTS_CMD_FEEDBACK:         Informs the device that a buffer was processed and can be refilled.
+ * @IPTS_CMD_CLEAR_MEM_WINDOW: Stops the data flow and clears the buffer addresses on the device.
+ * @IPTS_CMD_RESET_SENSOR:     Resets the sensor to its default state.
+ * @IPTS_CMD_GET_DESCRIPTOR:   Retrieves the HID descriptor of the device.
+ */
+enum ipts_command_code {
+	IPTS_CMD_GET_DEVICE_INFO = 0x01,
+	IPTS_CMD_SET_MODE = 0x02,
+	IPTS_CMD_SET_MEM_WINDOW = 0x03,
+	IPTS_CMD_QUIESCE_IO = 0x04,
+	IPTS_CMD_READY_FOR_DATA = 0x05,
+	IPTS_CMD_FEEDBACK = 0x06,
+	IPTS_CMD_CLEAR_MEM_WINDOW = 0x07,
+	IPTS_CMD_RESET_SENSOR = 0x0B,
+	IPTS_CMD_GET_DESCRIPTOR = 0x0F,
+};
+
+/**
+ * enum ipts_status - Possible status codes returned by the IPTS device.
+ * @IPTS_STATUS_SUCCESS:                 Operation completed successfully.
+ * @IPTS_STATUS_INVALID_PARAMS:          Command contained an invalid payload.
+ * @IPTS_STATUS_ACCESS_DENIED:           ME could not validate a buffer address.
+ * @IPTS_STATUS_CMD_SIZE_ERROR:          Command contains an invalid payload.
+ * @IPTS_STATUS_NOT_READY:               Buffer addresses have not been set.
+ * @IPTS_STATUS_REQUEST_OUTSTANDING:     There is an outstanding command of the same type.
+ * @IPTS_STATUS_NO_SENSOR_FOUND:         No sensor could be found.
+ * @IPTS_STATUS_OUT_OF_MEMORY:           Not enough free memory for requested operation.
+ * @IPTS_STATUS_INTERNAL_ERROR:          An unexpected error occurred.
+ * @IPTS_STATUS_SENSOR_DISABLED:         The sensor has been disabled and must be reinitialized.
+ * @IPTS_STATUS_COMPAT_CHECK_FAIL:       Compatibility revision check between sensor and ME failed.
+ *                                       The host can ignore this error and attempt to continue.
+ * @IPTS_STATUS_SENSOR_EXPECTED_RESET:   The sensor went through a reset initiated by the driver.
+ * @IPTS_STATUS_SENSOR_UNEXPECTED_RESET: The sensor went through an unexpected reset.
+ * @IPTS_STATUS_RESET_FAILED:            Requested sensor reset failed to complete.
+ * @IPTS_STATUS_TIMEOUT:                 The operation timed out.
+ * @IPTS_STATUS_TEST_MODE_FAIL:          Test mode pattern did not match expected values.
+ * @IPTS_STATUS_SENSOR_FAIL_FATAL:       The sensor reported an error during reset sequence.
+ *                                       Further progress is not possible.
+ * @IPTS_STATUS_SENSOR_FAIL_NONFATAL:    The sensor reported an error during reset sequence.
+ *                                       The driver can attempt to continue.
+ * @IPTS_STATUS_INVALID_DEVICE_CAPS:     The device reported invalid capabilities.
+ * @IPTS_STATUS_QUIESCE_IO_IN_PROGRESS:  Command cannot be completed until Quiesce IO is done.
+ */
+enum ipts_status {
+	IPTS_STATUS_SUCCESS = 0x00,
+	IPTS_STATUS_INVALID_PARAMS = 0x01,
+	IPTS_STATUS_ACCESS_DENIED = 0x02,
+	IPTS_STATUS_CMD_SIZE_ERROR = 0x03,
+	IPTS_STATUS_NOT_READY = 0x04,
+	IPTS_STATUS_REQUEST_OUTSTANDING = 0x05,
+	IPTS_STATUS_NO_SENSOR_FOUND = 0x06,
+	IPTS_STATUS_OUT_OF_MEMORY = 0x07,
+	IPTS_STATUS_INTERNAL_ERROR = 0x08,
+	IPTS_STATUS_SENSOR_DISABLED = 0x09,
+	IPTS_STATUS_COMPAT_CHECK_FAIL = 0x0A,
+	IPTS_STATUS_SENSOR_EXPECTED_RESET = 0x0B,
+	IPTS_STATUS_SENSOR_UNEXPECTED_RESET = 0x0C,
+	IPTS_STATUS_RESET_FAILED = 0x0D,
+	IPTS_STATUS_TIMEOUT = 0x0E,
+	IPTS_STATUS_TEST_MODE_FAIL = 0x0F,
+	IPTS_STATUS_SENSOR_FAIL_FATAL = 0x10,
+	IPTS_STATUS_SENSOR_FAIL_NONFATAL = 0x11,
+	IPTS_STATUS_INVALID_DEVICE_CAPS = 0x12,
+	IPTS_STATUS_QUIESCE_IO_IN_PROGRESS = 0x13,
+};
+
+/**
+ * struct ipts_command - Message that is sent to the device for calling a command.
+ * @cmd:     The command that will be called.
+ * @payload: Payload containing parameters for the called command.
+ */
+struct ipts_command {
+	enum ipts_command_code cmd;
+	u8 payload[320];
+} __packed;
+
+static_assert(sizeof(struct ipts_command) == 324);
+
+/**
+ * enum ipts_mode - Configures what data the device produces and how its sent.
+ * @IPTS_MODE_EVENT:    The device will send an event once a buffer was filled.
+ *                      Older devices will return singletouch data in this mode.
+ * @IPTS_MODE_DOORBELL: The device will notify the driver by incrementing the doorbell value.
+ *                      Older devices will return multitouch data in this mode.
+ */
+enum ipts_mode {
+	IPTS_MODE_EVENT = 0x00,
+	IPTS_MODE_DOORBELL = 0x01,
+};
+
+/**
+ * struct ipts_set_mode - Payload for the SET_MODE command.
+ * @mode: Changes the mode that IPTS will operate in.
+ */
+struct ipts_set_mode {
+	enum ipts_mode mode;
+	u8 reserved[12];
+} __packed;
+
+static_assert(sizeof(struct ipts_set_mode) == 16);
+
+#define IPTS_WORKQUEUE_SIZE	 8192
+#define IPTS_WORKQUEUE_ITEM_SIZE 16
+
+/**
+ * struct ipts_mem_window - Payload for the SET_MEM_WINDOW command.
+ * @data_addr_lower:      Lower 32 bits of the data buffer addresses.
+ * @data_addr_upper:      Upper 32 bits of the data buffer addresses.
+ * @workqueue_addr_lower: Lower 32 bits of the workqueue buffer address.
+ * @workqueue_addr_upper: Upper 32 bits of the workqueue buffer address.
+ * @doorbell_addr_lower:  Lower 32 bits of the doorbell buffer address.
+ * @doorbell_addr_upper:  Upper 32 bits of the doorbell buffer address.
+ * @feedbackaddr_lower:   Lower 32 bits of the feedback buffer addresses.
+ * @feedbackaddr_upper:   Upper 32 bits of the feedback buffer addresses.
+ * @hid2me_addr_lower:    Lower 32 bits of the hid2me buffer address.
+ * @hid2me_addr_upper:    Upper 32 bits of the hid2me buffer address.
+ * @hid2me_size:          Size of the hid2me feedback buffer.
+ * @workqueue_item_size:  Magic value. Must be 16.
+ * @workqueue_size:       Magic value. Must be 8192.
+ *
+ * The workqueue related items in this struct are required for using
+ * GuC submission with binary processing firmware. Since this driver does
+ * not use GuC submission and instead exports raw data to userspace, these
+ * items are not actually used, but they need to be allocated and passed
+ * to the device, otherwise initialization will fail.
+ */
+struct ipts_mem_window {
+	u32 data_addr_lower[IPTS_BUFFERS];
+	u32 data_addr_upper[IPTS_BUFFERS];
+	u32 workqueue_addr_lower;
+	u32 workqueue_addr_upper;
+	u32 doorbell_addr_lower;
+	u32 doorbell_addr_upper;
+	u32 feedback_addr_lower[IPTS_BUFFERS];
+	u32 feedback_addr_upper[IPTS_BUFFERS];
+	u32 hid2me_addr_lower;
+	u32 hid2me_addr_upper;
+	u32 hid2me_size;
+	u8 reserved1;
+	u8 workqueue_item_size;
+	u16 workqueue_size;
+	u8 reserved[32];
+} __packed;
+
+static_assert(sizeof(struct ipts_mem_window) == 320);
+
+/**
+ * struct ipts_quiesce_io - Payload for the QUIESCE_IO command.
+ */
+struct ipts_quiesce_io {
+	u8 reserved[12];
+} __packed;
+
+static_assert(sizeof(struct ipts_quiesce_io) == 12);
+
+/**
+ * struct ipts_feedback - Payload for the FEEDBACK command.
+ * @buffer: The buffer that the device should refill.
+ */
+struct ipts_feedback {
+	u32 buffer;
+	u8 reserved[12];
+} __packed;
+
+static_assert(sizeof(struct ipts_feedback) == 16);
+
+/**
+ * enum ipts_reset_type - Possible ways of resetting the device.
+ * @IPTS_RESET_TYPE_HARD: Perform hardware reset using GPIO pin.
+ * @IPTS_RESET_TYPE_SOFT: Perform software reset using SPI command.
+ */
+enum ipts_reset_type {
+	IPTS_RESET_TYPE_HARD = 0x00,
+	IPTS_RESET_TYPE_SOFT = 0x01,
+};
+
+/**
+ * struct ipts_reset - Payload for the RESET_SENSOR command.
+ * @type: How the device should get reset.
+ */
+struct ipts_reset_sensor {
+	enum ipts_reset_type type;
+	u8 reserved[4];
+} __packed;
+
+static_assert(sizeof(struct ipts_reset_sensor) == 8);
+
+/**
+ * struct ipts_get_descriptor - Payload for the GET_DESCRIPTOR command.
+ * @addr_lower: The lower 32 bits of the descriptor buffer address.
+ * @addr_upper: The upper 32 bits of the descriptor buffer address.
+ * @magic:      A magic value. Must be 8.
+ */
+struct ipts_get_descriptor {
+	u32 addr_lower;
+	u32 addr_upper;
+	u32 magic;
+	u8 reserved[12];
+} __packed;
+
+static_assert(sizeof(struct ipts_get_descriptor) == 24);
+
+/*
+ * The type of a response is indicated by a
+ * command code, with the most significant bit flipped to 1.
+ */
+#define IPTS_RSP_BIT BIT(31)
+
+/**
+ * struct ipts_response - Data returned from the device in response to a command.
+ * @cmd:     The command that this response answers (IPTS_RSP_BIT will be 1).
+ * @status:  The return code of the command.
+ * @payload: The data that was produced by the command.
+ */
+struct ipts_response {
+	enum ipts_command_code cmd;
+	enum ipts_status status;
+	u8 payload[80];
+} __packed;
+
+static_assert(sizeof(struct ipts_response) == 88);
+
+/**
+ * struct ipts_device_info - Vendor information of the IPTS device.
+ * @vendor:        Vendor ID of this device.
+ * @product:       Product ID of this device.
+ * @hw_version:    Hardware revision of this device.
+ * @fw_version:    Firmware revision of this device.
+ * @data_size:     Requested size for a data buffer.
+ * @feedback_size: Requested size for a feedback buffer.
+ * @mode:          Mode that the device currently operates in.
+ * @max_contacts:  Maximum amount of concurrent touches the sensor can process.
+ */
+struct ipts_device_info {
+	u16 vendor;
+	u16 product;
+	u32 hw_version;
+	u32 fw_version;
+	u32 data_size;
+	u32 feedback_size;
+	enum ipts_mode mode;
+	u8 max_contacts;
+	u8 reserved1[3];
+	u8 sensor_min_eds;
+	u8 sensor_maj_eds;
+	u8 me_min_eds;
+	u8 me_maj_eds;
+	u8 intf_eds;
+	u8 reserved2[11];
+} __packed;
+
+static_assert(sizeof(struct ipts_device_info) == 44);
+
+#endif /* IPTS_SPEC_DEVICE_H */
diff --git a/drivers/hid/ipts/spec-hid.h b/drivers/hid/ipts/spec-hid.h
new file mode 100644
index 000000000000..ea70f29ff00c
--- /dev/null
+++ b/drivers/hid/ipts/spec-hid.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2020-2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_SPEC_HID_H
+#define IPTS_SPEC_HID_H
+
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+/*
+ * Made-up type for passing raw IPTS data in a HID report.
+ */
+#define IPTS_HID_FRAME_TYPE_RAW 0xEE
+
+/**
+ * struct ipts_hid_frame - Header that is prefixed to raw IPTS data wrapped in a HID report.
+ * @size: Size of the data inside the report, including this header.
+ * @type: What type of data does this report contain.
+ */
+struct ipts_hid_header {
+	u32 size;
+	u8 reserved1;
+	u8 type;
+	u8 reserved2;
+	u8 data[];
+} __packed;
+
+static_assert(sizeof(struct ipts_hid_header) == 7);
+
+#endif /* IPTS_SPEC_HID_H */
diff --git a/drivers/hid/ipts/thread.c b/drivers/hid/ipts/thread.c
new file mode 100644
index 000000000000..8b46f775c107
--- /dev/null
+++ b/drivers/hid/ipts/thread.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+
+#include "thread.h"
+
+bool ipts_thread_should_stop(struct ipts_thread *thread)
+{
+	if (!thread)
+		return false;
+
+	return READ_ONCE(thread->should_stop);
+}
+
+static int ipts_thread_runner(void *data)
+{
+	int ret = 0;
+	struct ipts_thread *thread = data;
+
+	if (!thread)
+		return -EFAULT;
+
+	if (!thread->threadfn)
+		return -EFAULT;
+
+	ret = thread->threadfn(thread);
+	complete_all(&thread->done);
+
+	return ret;
+}
+
+int ipts_thread_start(struct ipts_thread *thread, int (*threadfn)(struct ipts_thread *thread),
+		      void *data, const char *name)
+{
+	if (!thread)
+		return -EFAULT;
+
+	if (!threadfn)
+		return -EFAULT;
+
+	init_completion(&thread->done);
+
+	thread->data = data;
+	thread->should_stop = false;
+	thread->threadfn = threadfn;
+
+	thread->thread = kthread_run(ipts_thread_runner, thread, name);
+	return PTR_ERR_OR_ZERO(thread->thread);
+}
+
+int ipts_thread_stop(struct ipts_thread *thread)
+{
+	int ret = 0;
+
+	if (!thread)
+		return -EFAULT;
+
+	if (!thread->thread)
+		return 0;
+
+	WRITE_ONCE(thread->should_stop, true);
+
+	/*
+	 * Make sure that the write has gone through before waiting.
+	 */
+	wmb();
+
+	wait_for_completion(&thread->done);
+	ret = kthread_stop(thread->thread);
+
+	thread->thread = NULL;
+	thread->data = NULL;
+	thread->threadfn = NULL;
+
+	return ret;
+}
diff --git a/drivers/hid/ipts/thread.h b/drivers/hid/ipts/thread.h
new file mode 100644
index 000000000000..a314843599fc
--- /dev/null
+++ b/drivers/hid/ipts/thread.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2016 Intel Corporation
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#ifndef IPTS_THREAD_H
+#define IPTS_THREAD_H
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+
+/*
+ * This wrapper over kthread is necessary, because calling kthread_stop makes it impossible
+ * to issue MEI commands from that thread while it shuts itself down. By using a custom
+ * boolean variable and a completion object, we can call kthread_stop only when the thread
+ * already finished all of its work and has returned.
+ */
+struct ipts_thread {
+	struct task_struct *thread;
+
+	bool should_stop;
+	struct completion done;
+
+	void *data;
+	int (*threadfn)(struct ipts_thread *thread);
+};
+
+/*
+ * ipts_thread_should_stop() - Returns true if the thread is asked to terminate.
+ * @thread: The current thread.
+ *
+ * Returns: true if the thread should stop, false if not.
+ */
+bool ipts_thread_should_stop(struct ipts_thread *thread);
+
+/*
+ * ipts_thread_start() - Starts an IPTS thread.
+ * @thread: The thread to initialize and start.
+ * @threadfn: The function to execute.
+ * @data: An argument that will be passed to threadfn.
+ * @name: The name of the new thread.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_thread_start(struct ipts_thread *thread, int (*threadfn)(struct ipts_thread *thread),
+		      void *data, const char name[]);
+
+/*
+ * ipts_thread_stop() - Asks the thread to terminate and waits until it has finished.
+ * @thread: The thread that should stop.
+ *
+ * Returns: The return value of the thread function.
+ */
+int ipts_thread_stop(struct ipts_thread *thread);
+
+#endif /* IPTS_THREAD_H */
-- 
2.41.0

From e52a30a8f4812f8af1ec6cc5b70e70123be609f1 Mon Sep 17 00:00:00 2001
From: Dorian Stoll <dorian.stoll@tmsp.io>
Date: Fri, 28 Apr 2023 15:41:12 +0200
Subject: [PATCH] Update IPTS from module repo

Changes:
 * Fix redefinition error on AOSP clang
 * Increase the polling frequency to reduce latency
 * Don't allocate a new buffer for every HID report
 * Always use the generic HID driver instead of forcing hid-multitouch

Based on https://github.com/linux-surface/intel-precise-touch/commit/a2b675d72dbde80ebe36a5b6ceaebd596c030314

Signed-off-by: Dorian Stoll <dorian.stoll@tmsp.io>
Patchset: ipts
---
 drivers/hid/ipts/hid.c       | 15 +++++----------
 drivers/hid/ipts/receiver.c  |  2 +-
 drivers/hid/ipts/resources.c | 35 +++++++++++++++++++++++++++++++----
 drivers/hid/ipts/resources.h |  3 +++
 4 files changed, 40 insertions(+), 15 deletions(-)

diff --git a/drivers/hid/ipts/hid.c b/drivers/hid/ipts/hid.c
index 6782394e8dde..a2471219615b 100644
--- a/drivers/hid/ipts/hid.c
+++ b/drivers/hid/ipts/hid.c
@@ -237,7 +237,6 @@ static struct hid_ll_driver ipts_hid_driver = {
 
 int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
 {
-	int ret = 0;
 	u8 *temp = NULL;
 	struct ipts_hid_header *frame = NULL;
 	struct ipts_data_header *header = NULL;
@@ -250,6 +249,9 @@ int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
 
 	header = (struct ipts_data_header *)ipts->resources.data[buffer].address;
 
+	temp = ipts->resources.report.address;
+	memset(temp, 0, ipts->resources.report.size);
+
 	if (!header)
 		return -EFAULT;
 
@@ -273,10 +275,6 @@ int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
 	if (header->size + 3 + sizeof(struct ipts_hid_header) > IPTS_HID_REPORT_DATA_SIZE)
 		return -ERANGE;
 
-	temp = kzalloc(IPTS_HID_REPORT_DATA_SIZE, GFP_KERNEL);
-	if (!temp)
-		return -ENOMEM;
-
 	/*
 	 * Synthesize a HID report matching the devices that natively send HID reports
 	 */
@@ -288,10 +286,7 @@ int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
 
 	memcpy(frame->data, header->data, header->size);
 
-	ret = hid_input_report(ipts->hid, HID_INPUT_REPORT, temp, IPTS_HID_REPORT_DATA_SIZE, 1);
-	kfree(temp);
-
-	return ret;
+	return hid_input_report(ipts->hid, HID_INPUT_REPORT, temp, IPTS_HID_REPORT_DATA_SIZE, 1);
 }
 
 int ipts_hid_init(struct ipts_context *ipts, struct ipts_device_info info)
@@ -318,7 +313,7 @@ int ipts_hid_init(struct ipts_context *ipts, struct ipts_device_info info)
 
 	ipts->hid->vendor = info.vendor;
 	ipts->hid->product = info.product;
-	ipts->hid->group = HID_GROUP_MULTITOUCH;
+	ipts->hid->group = HID_GROUP_GENERIC;
 
 	snprintf(ipts->hid->name, sizeof(ipts->hid->name), "IPTS %04X:%04X", info.vendor,
 		 info.product);
diff --git a/drivers/hid/ipts/receiver.c b/drivers/hid/ipts/receiver.c
index 77234f9e0e17..f56e9ed32d57 100644
--- a/drivers/hid/ipts/receiver.c
+++ b/drivers/hid/ipts/receiver.c
@@ -42,7 +42,7 @@ static void ipts_receiver_backoff(time64_t last, u32 n)
 	 * n seconds, sleep longer to avoid wasting CPU cycles.
 	 */
 	if (last + n > ktime_get_seconds())
-		msleep(20);
+		usleep_range(1 * USEC_PER_MSEC, 5 * USEC_PER_MSEC);
 	else
 		msleep(200);
 }
diff --git a/drivers/hid/ipts/resources.c b/drivers/hid/ipts/resources.c
index 80ba5885bb55..5e924d58c488 100644
--- a/drivers/hid/ipts/resources.c
+++ b/drivers/hid/ipts/resources.c
@@ -9,6 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/types.h>
 
+#include "desc.h"
 #include "resources.h"
 #include "spec-device.h"
 
@@ -49,16 +50,22 @@ int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t d
 {
 	int ret = 0;
 
+	/*
+	 * Some compilers (AOSP clang) complain about a redefined
+	 * variable when this is declared inside of the for loop.
+	 */
+	int i = 0;
+
 	if (!res)
 		return -EFAULT;
 
-	for (int i = 0; i < IPTS_BUFFERS; i++) {
+	for (i = 0; i < IPTS_BUFFERS; i++) {
 		ret = ipts_resources_alloc_buffer(&res->data[i], dev, ds);
 		if (ret)
 			goto err;
 	}
 
-	for (int i = 0; i < IPTS_BUFFERS; i++) {
+	for (i = 0; i < IPTS_BUFFERS; i++) {
 		ret = ipts_resources_alloc_buffer(&res->feedback[i], dev, fs);
 		if (ret)
 			goto err;
@@ -80,6 +87,16 @@ int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t d
 	if (ret)
 		goto err;
 
+	if (!res->report.address) {
+		res->report.size = IPTS_HID_REPORT_DATA_SIZE;
+		res->report.address = kzalloc(res->report.size, GFP_KERNEL);
+
+		if (!res->report.address) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
+
 	return 0;
 
 err:
@@ -90,13 +107,19 @@ int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t d
 
 int ipts_resources_free(struct ipts_resources *res)
 {
+	/*
+	 * Some compilers (AOSP clang) complain about a redefined
+	 * variable when this is declared inside of the for loop.
+	 */
+	int i = 0;
+
 	if (!res)
 		return -EFAULT;
 
-	for (int i = 0; i < IPTS_BUFFERS; i++)
+	for (i = 0; i < IPTS_BUFFERS; i++)
 		ipts_resources_free_buffer(&res->data[i]);
 
-	for (int i = 0; i < IPTS_BUFFERS; i++)
+	for (i = 0; i < IPTS_BUFFERS; i++)
 		ipts_resources_free_buffer(&res->feedback[i]);
 
 	ipts_resources_free_buffer(&res->doorbell);
@@ -104,5 +127,9 @@ int ipts_resources_free(struct ipts_resources *res)
 	ipts_resources_free_buffer(&res->hid2me);
 	ipts_resources_free_buffer(&res->descriptor);
 
+	kfree(res->report.address);
+	res->report.address = NULL;
+	res->report.size = 0;
+
 	return 0;
 }
diff --git a/drivers/hid/ipts/resources.h b/drivers/hid/ipts/resources.h
index 6cbb24a8a054..e0c400f420b9 100644
--- a/drivers/hid/ipts/resources.h
+++ b/drivers/hid/ipts/resources.h
@@ -31,6 +31,9 @@ struct ipts_resources {
 	struct ipts_buffer hid2me;
 
 	struct ipts_buffer descriptor;
+
+	// Buffer for synthesizing HID reports
+	struct ipts_buffer report;
 };
 
 int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t ds, size_t fs);
-- 
2.41.0

From 35874dc856b04e0be4fc6e9a18e978640272a46e Mon Sep 17 00:00:00 2001
From: Dorian Stoll <dorian.stoll@tmsp.io>
Date: Mon, 17 Jul 2023 18:10:43 +0200
Subject: [PATCH] Update IPTS from module repo

Changes:
* Remove usages of C11 for compatibility with older (Android) kernels
* Remove sensor reset during shutdown
* Fix compiling resources.c on Android-x86 kernel
* Split out HID behaviour for different EDS versions into different files
* Fix kernel-doc comments
* Add missing docs for members of the device info struct
* Drop Intel copyright
* Rename doorbell mode to poll mode
* Disable the HID interface when the hardware is shutting down.

Based on https://github.com/linux-surface/intel-precise-touch/commit/56765da3f87d87c5e5cf09e928abe0f579525e5e

Signed-off-by: Dorian Stoll <dorian.stoll@tmsp.io>
Patchset: ipts
---
 drivers/hid/ipts/Makefile      |   2 +
 drivers/hid/ipts/cmd.c         |   1 -
 drivers/hid/ipts/cmd.h         |   7 +-
 drivers/hid/ipts/context.h     |   3 +-
 drivers/hid/ipts/control.c     |  25 ++---
 drivers/hid/ipts/control.h     |  25 +++--
 drivers/hid/ipts/desc.h        |   1 -
 drivers/hid/ipts/eds1.c        | 103 ++++++++++++++++++
 drivers/hid/ipts/eds1.h        |  35 +++++++
 drivers/hid/ipts/eds2.c        | 144 ++++++++++++++++++++++++++
 drivers/hid/ipts/eds2.h        |  35 +++++++
 drivers/hid/ipts/hid.c         | 184 ++++++---------------------------
 drivers/hid/ipts/hid.h         |   4 +-
 drivers/hid/ipts/main.c        |   1 -
 drivers/hid/ipts/mei.c         |   1 -
 drivers/hid/ipts/mei.h         |   7 +-
 drivers/hid/ipts/receiver.c    |  15 +--
 drivers/hid/ipts/receiver.h    |   1 -
 drivers/hid/ipts/resources.c   |   6 +-
 drivers/hid/ipts/resources.h   |   1 -
 drivers/hid/ipts/spec-device.h |  31 +++---
 drivers/hid/ipts/spec-hid.h    |   1 -
 drivers/hid/ipts/thread.c      |   1 -
 drivers/hid/ipts/thread.h      |   7 +-
 24 files changed, 413 insertions(+), 228 deletions(-)
 create mode 100644 drivers/hid/ipts/eds1.c
 create mode 100644 drivers/hid/ipts/eds1.h
 create mode 100644 drivers/hid/ipts/eds2.c
 create mode 100644 drivers/hid/ipts/eds2.h

diff --git a/drivers/hid/ipts/Makefile b/drivers/hid/ipts/Makefile
index 0fe655bccdc0..883896f68e6a 100644
--- a/drivers/hid/ipts/Makefile
+++ b/drivers/hid/ipts/Makefile
@@ -6,6 +6,8 @@
 obj-$(CONFIG_HID_IPTS) += ipts.o
 ipts-objs := cmd.o
 ipts-objs += control.o
+ipts-objs += eds1.o
+ipts-objs += eds2.o
 ipts-objs += hid.o
 ipts-objs += main.o
 ipts-objs += mei.o
diff --git a/drivers/hid/ipts/cmd.c b/drivers/hid/ipts/cmd.c
index 7fd69271ccd5..63a4934bbc5f 100644
--- a/drivers/hid/ipts/cmd.c
+++ b/drivers/hid/ipts/cmd.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/cmd.h b/drivers/hid/ipts/cmd.h
index 924758ffee67..2b4079075b64 100644
--- a/drivers/hid/ipts/cmd.h
+++ b/drivers/hid/ipts/cmd.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -19,7 +18,7 @@
  */
 #define IPTS_CMD_DEFAULT_TIMEOUT 1000
 
-/*
+/**
  * ipts_cmd_recv_timeout() - Receives a response to a command.
  * @ipts: The IPTS driver context.
  * @code: The type of the command / response.
@@ -33,7 +32,7 @@
 int ipts_cmd_recv_timeout(struct ipts_context *ipts, enum ipts_command_code code,
 			  struct ipts_response *rsp, u64 timeout);
 
-/*
+/**
  * ipts_cmd_recv() - Receives a response to a command.
  * @ipts: The IPTS driver context.
  * @code: The type of the command / response.
@@ -47,7 +46,7 @@ static inline int ipts_cmd_recv(struct ipts_context *ipts, enum ipts_command_cod
 	return ipts_cmd_recv_timeout(ipts, code, rsp, IPTS_CMD_DEFAULT_TIMEOUT);
 }
 
-/*
+/**
  * ipts_cmd_send() - Executes a command on the device.
  * @ipts: The IPTS driver context.
  * @code: The type of the command to execute.
diff --git a/drivers/hid/ipts/context.h b/drivers/hid/ipts/context.h
index 3450a95e66ee..ba33259f1f7c 100644
--- a/drivers/hid/ipts/context.h
+++ b/drivers/hid/ipts/context.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -41,7 +40,9 @@ struct ipts_context {
 	struct ipts_buffer feature_report;
 	struct ipts_buffer descriptor;
 
+	bool hid_active;
 	struct hid_device *hid;
+
 	struct ipts_device_info info;
 	struct ipts_resources resources;
 
diff --git a/drivers/hid/ipts/control.c b/drivers/hid/ipts/control.c
index 2f61500b5119..5360842d260b 100644
--- a/drivers/hid/ipts/control.c
+++ b/drivers/hid/ipts/control.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -88,6 +87,7 @@ static int ipts_control_set_mode(struct ipts_context *ipts, enum ipts_mode mode)
 
 static int ipts_control_set_mem_window(struct ipts_context *ipts, struct ipts_resources *res)
 {
+	int i = 0;
 	int ret = 0;
 	struct ipts_mem_window cmd = { 0 };
 	struct ipts_response rsp = { 0 };
@@ -98,7 +98,7 @@ static int ipts_control_set_mem_window(struct ipts_context *ipts, struct ipts_re
 	if (!res)
 		return -EFAULT;
 
-	for (int i = 0; i < IPTS_BUFFERS; i++) {
+	for (i = 0; i < IPTS_BUFFERS; i++) {
 		cmd.data_addr_lower[i] = lower_32_bits(res->data[i].dma_address);
 		cmd.data_addr_upper[i] = upper_32_bits(res->data[i].dma_address);
 		cmd.feedback_addr_lower[i] = lower_32_bits(res->feedback[i].dma_address);
@@ -342,12 +342,6 @@ int ipts_control_hid2me_feedback(struct ipts_context *ipts, enum ipts_feedback_c
 	return ipts_control_send_feedback(ipts, IPTS_HID2ME_BUFFER);
 }
 
-static inline int ipts_control_reset_sensor(struct ipts_context *ipts)
-{
-	return ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_SOFT_RESET,
-					    IPTS_FEEDBACK_DATA_TYPE_VENDOR, NULL, 0);
-}
-
 int ipts_control_start(struct ipts_context *ipts)
 {
 	int ret = 0;
@@ -389,9 +383,9 @@ int ipts_control_start(struct ipts_context *ipts)
 		}
 
 		/*
-		 * Newer devices can be directly initialized in doorbell mode.
+		 * Newer devices can be directly initialized in polling mode.
 		 */
-		ipts->mode = IPTS_MODE_DOORBELL;
+		ipts->mode = IPTS_MODE_POLL;
 	}
 
 	ret = ipts_control_set_mode(ipts, ipts->mode);
@@ -418,6 +412,8 @@ int ipts_control_start(struct ipts_context *ipts)
 		return ret;
 	}
 
+	ipts_hid_enable(ipts);
+
 	ret = ipts_hid_init(ipts, info);
 	if (ret) {
 		dev_err(ipts->dev, "Failed to initialize HID device: %d\n", ret);
@@ -434,6 +430,7 @@ static int _ipts_control_stop(struct ipts_context *ipts)
 	if (!ipts)
 		return -EFAULT;
 
+	ipts_hid_disable(ipts);
 	dev_info(ipts->dev, "Stopping IPTS\n");
 
 	ret = ipts_receiver_stop(ipts);
@@ -442,12 +439,6 @@ static int _ipts_control_stop(struct ipts_context *ipts)
 		return ret;
 	}
 
-	ret = ipts_control_reset_sensor(ipts);
-	if (ret) {
-		dev_err(ipts->dev, "Failed to reset sensor: %d\n", ret);
-		return ret;
-	}
-
 	ret = ipts_resources_free(&ipts->resources);
 	if (ret) {
 		dev_err(ipts->dev, "Failed to free resources: %d\n", ret);
@@ -483,7 +474,7 @@ int ipts_control_restart(struct ipts_context *ipts)
 		return ret;
 
 	/*
-	 * Give the sensor some time to come back from resetting
+	 * Wait a second to give the sensor time to fully shut down.
 	 */
 	msleep(1000);
 
diff --git a/drivers/hid/ipts/control.h b/drivers/hid/ipts/control.h
index 744bb92d682a..26629c5144ed 100644
--- a/drivers/hid/ipts/control.h
+++ b/drivers/hid/ipts/control.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -15,7 +14,7 @@
 #include "spec-data.h"
 #include "spec-device.h"
 
-/*
+/**
  * ipts_control_request_flush() - Stop the data flow.
  * @ipts: The IPTS driver context.
  *
@@ -26,7 +25,7 @@
  */
 int ipts_control_request_flush(struct ipts_context *ipts);
 
-/*
+/**
  * ipts_control_wait_flush() - Wait until data flow has been stopped.
  * @ipts: The IPTS driver context.
  *
@@ -34,7 +33,7 @@ int ipts_control_request_flush(struct ipts_context *ipts);
  */
 int ipts_control_wait_flush(struct ipts_context *ipts);
 
-/*
+/**
  * ipts_control_wait_flush() - Notify the device that the driver can receive new data.
  * @ipts: The IPTS driver context.
  *
@@ -42,19 +41,19 @@ int ipts_control_wait_flush(struct ipts_context *ipts);
  */
 int ipts_control_request_data(struct ipts_context *ipts);
 
-/*
+/**
  * ipts_control_wait_data() - Wait until new data is available.
  * @ipts: The IPTS driver context.
  * @block: Whether to block execution until data is available.
  *
- * In doorbell mode, this function will never return while the data flow is active. Instead,
- * the doorbell will be incremented when new data is available.
+ * In poll mode, this function will never return while the data flow is active. Instead,
+ * the poll will be incremented when new data is available.
  *
  * Returns: 0 on success, <0 on error, -EAGAIN if no data is available.
  */
 int ipts_control_wait_data(struct ipts_context *ipts, bool block);
 
-/*
+/**
  * ipts_control_send_feedback() - Submits a feedback buffer to the device.
  * @ipts: The IPTS driver context.
  * @buffer: The ID of the buffer containing feedback data.
@@ -63,7 +62,7 @@ int ipts_control_wait_data(struct ipts_context *ipts, bool block);
  */
 int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer);
 
-/*
+/**
  * ipts_control_hid2me_feedback() - Sends HID2ME feedback, a special type of feedback.
  * @ipts: The IPTS driver context.
  * @cmd: The command that will be run on the device.
@@ -80,7 +79,7 @@ int ipts_control_send_feedback(struct ipts_context *ipts, u32 buffer);
 int ipts_control_hid2me_feedback(struct ipts_context *ipts, enum ipts_feedback_cmd_type cmd,
 				 enum ipts_feedback_data_type type, void *data, size_t size);
 
-/*
+/**
  * ipts_control_refill_buffer() - Acknowledges that data in a buffer has been processed.
  * @ipts: The IPTS driver context.
  * @buffer: The buffer that has been processed and can be refilled.
@@ -100,7 +99,7 @@ static inline int ipts_control_refill_buffer(struct ipts_context *ipts, u32 buff
 	return ipts_control_send_feedback(ipts, buffer);
 }
 
-/*
+/**
  * ipts_control_start() - Initialized the device and starts the data flow.
  * @ipts: The IPTS driver context.
  *
@@ -108,7 +107,7 @@ static inline int ipts_control_refill_buffer(struct ipts_context *ipts, u32 buff
  */
 int ipts_control_start(struct ipts_context *ipts);
 
-/*
+/**
  * ipts_control_stop() - Stops the data flow and resets the device.
  * @ipts: The IPTS driver context.
  *
@@ -116,7 +115,7 @@ int ipts_control_start(struct ipts_context *ipts);
  */
 int ipts_control_stop(struct ipts_context *ipts);
 
-/*
+/**
  * ipts_control_restart() - Stops the device and starts it again.
  * @ipts: The IPTS driver context.
  *
diff --git a/drivers/hid/ipts/desc.h b/drivers/hid/ipts/desc.h
index c058974a03a1..307438c7c80c 100644
--- a/drivers/hid/ipts/desc.h
+++ b/drivers/hid/ipts/desc.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2022-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/eds1.c b/drivers/hid/ipts/eds1.c
new file mode 100644
index 000000000000..ecbb3a8bdaf6
--- /dev/null
+++ b/drivers/hid/ipts/eds1.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/err.h>
+#include <linux/gfp.h>
+#include <linux/hid.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "context.h"
+#include "control.h"
+#include "desc.h"
+#include "spec-device.h"
+
+int ipts_eds1_get_descriptor(struct ipts_context *ipts, u8 **desc_buffer, size_t *desc_size)
+{
+	size_t size = 0;
+	u8 *buffer = NULL;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!desc_buffer)
+		return -EFAULT;
+
+	if (!desc_size)
+		return -EFAULT;
+
+	size = sizeof(ipts_singletouch_descriptor) + sizeof(ipts_fallback_descriptor);
+
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	memcpy(buffer, ipts_singletouch_descriptor, sizeof(ipts_singletouch_descriptor));
+	memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts_fallback_descriptor,
+	       sizeof(ipts_fallback_descriptor));
+
+	*desc_size = size;
+	*desc_buffer = buffer;
+
+	return 0;
+}
+
+static int ipts_eds1_switch_mode(struct ipts_context *ipts, enum ipts_mode mode)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (ipts->mode == mode)
+		return 0;
+
+	ipts->mode = mode;
+
+	ret = ipts_control_restart(ipts);
+	if (ret)
+		dev_err(ipts->dev, "Failed to switch modes: %d\n", ret);
+
+	return ret;
+}
+
+int ipts_eds1_raw_request(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+			  enum hid_report_type report_type, enum hid_class_request request_type)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buffer)
+		return -EFAULT;
+
+	if (report_id != IPTS_HID_REPORT_SET_MODE)
+		return -EIO;
+
+	if (report_type != HID_FEATURE_REPORT)
+		return -EIO;
+
+	if (size != 2)
+		return -EINVAL;
+
+	/*
+	 * Implement mode switching report for older devices without native HID support.
+	 */
+
+	if (request_type == HID_REQ_GET_REPORT) {
+		memset(buffer, 0, size);
+		buffer[0] = report_id;
+		buffer[1] = ipts->mode;
+	} else if (request_type == HID_REQ_SET_REPORT) {
+		return ipts_eds1_switch_mode(ipts, buffer[1]);
+	} else {
+		return -EIO;
+	}
+
+	return ret;
+}
diff --git a/drivers/hid/ipts/eds1.h b/drivers/hid/ipts/eds1.h
new file mode 100644
index 000000000000..eeeb6575e3e8
--- /dev/null
+++ b/drivers/hid/ipts/eds1.h
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+#include "context.h"
+
+/**
+ * ipts_eds1_get_descriptor() - Assembles the HID descriptor of the device.
+ * @ipts: The IPTS driver context.
+ * @desc_buffer: A pointer to the location where the address of the allocated buffer is stored.
+ * @desc_size: A pointer to the location where the size of the allocated buffer is stored.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_eds1_get_descriptor(struct ipts_context *ipts, u8 **desc_buffer, size_t *desc_size);
+
+/**
+ * ipts_eds1_raw_request() - Executes an output or feature report on the device.
+ * @ipts: The IPTS driver context.
+ * @buffer: The buffer containing the report.
+ * @size: The size of the buffer.
+ * @report_id: The HID report ID.
+ * @report_type: Whether this report is an output or a feature report.
+ * @request_type: Whether this report requests or sends data.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_eds1_raw_request(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+			  enum hid_report_type report_type, enum hid_class_request request_type);
diff --git a/drivers/hid/ipts/eds2.c b/drivers/hid/ipts/eds2.c
new file mode 100644
index 000000000000..e835b460aa79
--- /dev/null
+++ b/drivers/hid/ipts/eds2.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/gfp.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "context.h"
+#include "control.h"
+#include "desc.h"
+#include "spec-data.h"
+
+int ipts_eds2_get_descriptor(struct ipts_context *ipts, u8 **desc_buffer, size_t *desc_size)
+{
+	size_t size = 0;
+	u8 *buffer = NULL;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!desc_buffer)
+		return -EFAULT;
+
+	if (!desc_size)
+		return -EFAULT;
+
+	size = sizeof(ipts_singletouch_descriptor) + ipts->descriptor.size;
+
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!*buffer)
+		return -ENOMEM;
+
+	memcpy(buffer, ipts_singletouch_descriptor, sizeof(ipts_singletouch_descriptor));
+	memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts->descriptor.address,
+	       ipts->descriptor.size);
+
+	*desc_size = size;
+	*desc_buffer = buffer;
+
+	return 0;
+}
+
+static int ipts_eds2_get_feature(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+				 enum ipts_feedback_data_type type)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buffer)
+		return -EFAULT;
+
+	mutex_lock(&ipts->feature_lock);
+
+	memset(buffer, 0, size);
+	buffer[0] = report_id;
+
+	memset(&ipts->feature_report, 0, sizeof(ipts->feature_report));
+	reinit_completion(&ipts->feature_event);
+
+	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buffer, size);
+	if (ret) {
+		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
+		goto out;
+	}
+
+	ret = wait_for_completion_timeout(&ipts->feature_event, msecs_to_jiffies(5000));
+	if (ret == 0) {
+		dev_warn(ipts->dev, "GET_FEATURES timed out!\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!ipts->feature_report.address) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (ipts->feature_report.size > size) {
+		ret = -ETOOSMALL;
+		goto out;
+	}
+
+	ret = ipts->feature_report.size;
+	memcpy(buffer, ipts->feature_report.address, ipts->feature_report.size);
+
+out:
+	mutex_unlock(&ipts->feature_lock);
+	return ret;
+}
+
+static int ipts_eds2_set_feature(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+				 enum ipts_feedback_data_type type)
+{
+	int ret = 0;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buffer)
+		return -EFAULT;
+
+	buffer[0] = report_id;
+
+	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buffer, size);
+	if (ret)
+		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
+
+	return ret;
+}
+
+int ipts_eds2_raw_request(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+			  enum hid_report_type report_type, enum hid_class_request request_type)
+{
+	enum ipts_feedback_data_type feedback_type = IPTS_FEEDBACK_DATA_TYPE_VENDOR;
+
+	if (!ipts)
+		return -EFAULT;
+
+	if (!buffer)
+		return -EFAULT;
+
+	if (report_type == HID_OUTPUT_REPORT && request_type == HID_REQ_SET_REPORT)
+		feedback_type = IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT;
+	else if (report_type == HID_FEATURE_REPORT && request_type == HID_REQ_GET_REPORT)
+		feedback_type = IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES;
+	else if (report_type == HID_FEATURE_REPORT && request_type == HID_REQ_SET_REPORT)
+		feedback_type = IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES;
+	else
+		return -EIO;
+
+	if (request_type == HID_REQ_GET_REPORT)
+		return ipts_eds2_get_feature(ipts, buffer, report_id, size, feedback_type);
+	else
+		return ipts_eds2_set_feature(ipts, buffer, report_id, size, feedback_type);
+}
diff --git a/drivers/hid/ipts/eds2.h b/drivers/hid/ipts/eds2.h
new file mode 100644
index 000000000000..064e3716907a
--- /dev/null
+++ b/drivers/hid/ipts/eds2.h
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Dorian Stoll
+ *
+ * Linux driver for Intel Precise Touch & Stylus
+ */
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+#include "context.h"
+
+/**
+ * ipts_eds2_get_descriptor() - Assembles the HID descriptor of the device.
+ * @ipts: The IPTS driver context.
+ * @desc_buffer: A pointer to the location where the address of the allocated buffer is stored.
+ * @desc_size: A pointer to the location where the size of the allocated buffer is stored.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_eds2_get_descriptor(struct ipts_context *ipts, u8 **desc_buffer, size_t *desc_size);
+
+/**
+ * ipts_eds2_raw_request() - Executes an output or feature report on the device.
+ * @ipts: The IPTS driver context.
+ * @buffer: The buffer containing the report.
+ * @size: The size of the buffer.
+ * @report_id: The HID report ID.
+ * @report_type: Whether this report is an output or a feature report.
+ * @request_type: Whether this report requests or sends data.
+ *
+ * Returns: 0 on success, <0 on error.
+ */
+int ipts_eds2_raw_request(struct ipts_context *ipts, u8 *buffer, size_t size, u8 report_id,
+			  enum hid_report_type report_type, enum hid_class_request request_type);
diff --git a/drivers/hid/ipts/hid.c b/drivers/hid/ipts/hid.c
index a2471219615b..e34a1a4f9fa7 100644
--- a/drivers/hid/ipts/hid.c
+++ b/drivers/hid/ipts/hid.c
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2022-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
  */
 
 #include <linux/completion.h>
+#include <linux/err.h>
 #include <linux/gfp.h>
 #include <linux/hid.h>
 #include <linux/mutex.h>
@@ -14,38 +14,30 @@
 #include <linux/types.h>
 
 #include "context.h"
-#include "control.h"
 #include "desc.h"
+#include "eds1.h"
+#include "eds2.h"
 #include "hid.h"
 #include "spec-data.h"
-#include "spec-device.h"
 #include "spec-hid.h"
 
-static int ipts_hid_start(struct hid_device *hid)
+void ipts_hid_enable(struct ipts_context *ipts)
 {
-	return 0;
+	WRITE_ONCE(ipts->hid_active, true);
 }
 
-static void ipts_hid_stop(struct hid_device *hid)
+void ipts_hid_disable(struct ipts_context *ipts)
 {
+	WRITE_ONCE(ipts->hid_active, false);
 }
 
-static int ipts_hid_switch_mode(struct ipts_context *ipts, enum ipts_mode mode)
+static int ipts_hid_start(struct hid_device *hid)
 {
-	if (!ipts)
-		return -EFAULT;
-
-	if (ipts->mode == mode)
-		return 0;
-
-	/*
-	 * This is only allowed on older devices.
-	 */
-	if (ipts->info.intf_eds > 1)
-		return 0;
+	return 0;
+}
 
-	ipts->mode = mode;
-	return ipts_control_restart(ipts);
+static void ipts_hid_stop(struct hid_device *hid)
+{
 }
 
 static int ipts_hid_parse(struct hid_device *hid)
@@ -53,8 +45,6 @@ static int ipts_hid_parse(struct hid_device *hid)
 	int ret = 0;
 	struct ipts_context *ipts = NULL;
 
-	bool has_native_descriptor = false;
-
 	u8 *buffer = NULL;
 	size_t size = 0;
 
@@ -66,26 +56,17 @@ static int ipts_hid_parse(struct hid_device *hid)
 	if (!ipts)
 		return -EFAULT;
 
-	size = sizeof(ipts_singletouch_descriptor);
-	has_native_descriptor = ipts->descriptor.address && ipts->descriptor.size > 0;
+	if (!READ_ONCE(ipts->hid_active))
+		return -ENODEV;
 
-	if (has_native_descriptor)
-		size += ipts->descriptor.size;
+	if (ipts->info.intf_eds == 1)
+		ret = ipts_eds1_get_descriptor(ipts, &buffer, &size);
 	else
-		size += sizeof(ipts_fallback_descriptor);
-
-	buffer = kzalloc(size, GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	memcpy(buffer, ipts_singletouch_descriptor, sizeof(ipts_singletouch_descriptor));
+		ret = ipts_eds2_get_descriptor(ipts, &buffer, &size);
 
-	if (has_native_descriptor) {
-		memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts->descriptor.address,
-		       ipts->descriptor.size);
-	} else {
-		memcpy(&buffer[sizeof(ipts_singletouch_descriptor)], ipts_fallback_descriptor,
-		       sizeof(ipts_fallback_descriptor));
+	if (ret) {
+		dev_err(ipts->dev, "Failed to allocate HID descriptor: %d\n", ret);
+		return ret;
 	}
 
 	ret = hid_parse_report(hid, buffer, size);
@@ -99,84 +80,11 @@ static int ipts_hid_parse(struct hid_device *hid)
 	return 0;
 }
 
-static int ipts_hid_get_feature(struct ipts_context *ipts, unsigned char reportnum, __u8 *buf,
-				size_t size, enum ipts_feedback_data_type type)
-{
-	int ret = 0;
-
-	if (!ipts)
-		return -EFAULT;
-
-	if (!buf)
-		return -EFAULT;
-
-	mutex_lock(&ipts->feature_lock);
-
-	memset(buf, 0, size);
-	buf[0] = reportnum;
-
-	memset(&ipts->feature_report, 0, sizeof(ipts->feature_report));
-	reinit_completion(&ipts->feature_event);
-
-	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buf, size);
-	if (ret) {
-		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
-		goto out;
-	}
-
-	ret = wait_for_completion_timeout(&ipts->feature_event, msecs_to_jiffies(5000));
-	if (ret == 0) {
-		dev_warn(ipts->dev, "GET_FEATURES timed out!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	if (!ipts->feature_report.address) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	if (ipts->feature_report.size > size) {
-		ret = -ETOOSMALL;
-		goto out;
-	}
-
-	ret = ipts->feature_report.size;
-	memcpy(buf, ipts->feature_report.address, ipts->feature_report.size);
-
-out:
-	mutex_unlock(&ipts->feature_lock);
-	return ret;
-}
-
-static int ipts_hid_set_feature(struct ipts_context *ipts, unsigned char reportnum, __u8 *buf,
-				size_t size, enum ipts_feedback_data_type type)
-{
-	int ret = 0;
-
-	if (!ipts)
-		return -EFAULT;
-
-	if (!buf)
-		return -EFAULT;
-
-	buf[0] = reportnum;
-
-	ret = ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE, type, buf, size);
-	if (ret)
-		dev_err(ipts->dev, "Failed to send hid2me feedback: %d\n", ret);
-
-	return ret;
-}
-
-static int ipts_hid_raw_request(struct hid_device *hid, unsigned char reportnum, __u8 *buf,
-				size_t size, unsigned char rtype, int reqtype)
+static int ipts_hid_raw_request(struct hid_device *hid, unsigned char report_id, __u8 *buffer,
+				size_t size, unsigned char report_type, int request_type)
 {
-	int ret = 0;
 	struct ipts_context *ipts = NULL;
 
-	enum ipts_feedback_data_type type = IPTS_FEEDBACK_DATA_TYPE_VENDOR;
-
 	if (!hid)
 		return -ENODEV;
 
@@ -185,44 +93,16 @@ static int ipts_hid_raw_request(struct hid_device *hid, unsigned char reportnum,
 	if (!ipts)
 		return -EFAULT;
 
-	if (!buf)
-		return -EFAULT;
-
-	if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT)
-		type = IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT;
-	else if (rtype == HID_FEATURE_REPORT && reqtype == HID_REQ_GET_REPORT)
-		type = IPTS_FEEDBACK_DATA_TYPE_GET_FEATURES;
-	else if (rtype == HID_FEATURE_REPORT && reqtype == HID_REQ_SET_REPORT)
-		type = IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES;
-	else
-		return -EIO;
-
-	// Implemente mode switching report for older devices without native HID support
-	if (type == IPTS_FEEDBACK_DATA_TYPE_SET_FEATURES && reportnum == IPTS_HID_REPORT_SET_MODE) {
-		ret = ipts_hid_switch_mode(ipts, buf[1]);
-		if (ret) {
-			dev_err(ipts->dev, "Failed to switch modes: %d\n", ret);
-			return ret;
-		}
-	}
-
-	if (reqtype == HID_REQ_GET_REPORT)
-		return ipts_hid_get_feature(ipts, reportnum, buf, size, type);
-	else
-		return ipts_hid_set_feature(ipts, reportnum, buf, size, type);
-}
-
-static int ipts_hid_output_report(struct hid_device *hid, __u8 *data, size_t size)
-{
-	struct ipts_context *ipts = NULL;
-
-	if (!hid)
+	if (!READ_ONCE(ipts->hid_active))
 		return -ENODEV;
 
-	ipts = hid->driver_data;
-
-	return ipts_control_hid2me_feedback(ipts, IPTS_FEEDBACK_CMD_TYPE_NONE,
-					    IPTS_FEEDBACK_DATA_TYPE_OUTPUT_REPORT, data, size);
+	if (ipts->info.intf_eds == 1) {
+		return ipts_eds1_raw_request(ipts, buffer, size, report_id, report_type,
+					     request_type);
+	} else {
+		return ipts_eds2_raw_request(ipts, buffer, size, report_id, report_type,
+					     request_type);
+	}
 }
 
 static struct hid_ll_driver ipts_hid_driver = {
@@ -232,7 +112,6 @@ static struct hid_ll_driver ipts_hid_driver = {
 	.close = ipts_hid_stop,
 	.parse = ipts_hid_parse,
 	.raw_request = ipts_hid_raw_request,
-	.output_report = ipts_hid_output_report,
 };
 
 int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
@@ -247,6 +126,9 @@ int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer)
 	if (!ipts->hid)
 		return -ENODEV;
 
+	if (!READ_ONCE(ipts->hid_active))
+		return -ENODEV;
+
 	header = (struct ipts_data_header *)ipts->resources.data[buffer].address;
 
 	temp = ipts->resources.report.address;
diff --git a/drivers/hid/ipts/hid.h b/drivers/hid/ipts/hid.h
index 62bf3cd48608..1ebe77447903 100644
--- a/drivers/hid/ipts/hid.h
+++ b/drivers/hid/ipts/hid.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2022-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -14,6 +13,9 @@
 #include "context.h"
 #include "spec-device.h"
 
+void ipts_hid_enable(struct ipts_context *ipts);
+void ipts_hid_disable(struct ipts_context *ipts);
+
 int ipts_hid_input_data(struct ipts_context *ipts, u32 buffer);
 
 int ipts_hid_init(struct ipts_context *ipts, struct ipts_device_info info);
diff --git a/drivers/hid/ipts/main.c b/drivers/hid/ipts/main.c
index 0f20c6c08c38..fb5b5c13ee3e 100644
--- a/drivers/hid/ipts/main.c
+++ b/drivers/hid/ipts/main.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/mei.c b/drivers/hid/ipts/mei.c
index 26666fd99b0c..1e0395ceae4a 100644
--- a/drivers/hid/ipts/mei.c
+++ b/drivers/hid/ipts/mei.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/mei.h b/drivers/hid/ipts/mei.h
index eadacae54c40..973bade6b0fd 100644
--- a/drivers/hid/ipts/mei.h
+++ b/drivers/hid/ipts/mei.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -31,7 +30,7 @@ struct ipts_mei {
 	struct rw_semaphore message_lock;
 };
 
-/*
+/**
  * ipts_mei_recv() - Receive data from a MEI device.
  * @mei: The IPTS MEI device context.
  * @code: The IPTS command code to look for.
@@ -45,7 +44,7 @@ struct ipts_mei {
 int ipts_mei_recv(struct ipts_mei *mei, enum ipts_command_code code, struct ipts_response *rsp,
 		  u64 timeout);
 
-/*
+/**
  * ipts_mei_send() - Send data to a MEI device.
  * @ipts: The IPTS MEI device context.
  * @data: The data to send.
@@ -55,7 +54,7 @@ int ipts_mei_recv(struct ipts_mei *mei, enum ipts_command_code code, struct ipts
  */
 int ipts_mei_send(struct ipts_mei *mei, void *data, size_t length);
 
-/*
+/**
  * ipts_mei_init() - Initialize the MEI device context.
  * @mei: The MEI device context to initialize.
  * @cldev: The MEI device the context will be bound to.
diff --git a/drivers/hid/ipts/receiver.c b/drivers/hid/ipts/receiver.c
index f56e9ed32d57..ef66c3c9db80 100644
--- a/drivers/hid/ipts/receiver.c
+++ b/drivers/hid/ipts/receiver.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -66,7 +65,9 @@ static int ipts_receiver_event_loop(struct ipts_thread *thread)
 	dev_info(ipts->dev, "IPTS running in event mode\n");
 
 	while (!ipts_thread_should_stop(thread)) {
-		for (int i = 0; i < IPTS_BUFFERS; i++) {
+		int i = 0;
+
+		for (i = 0; i < IPTS_BUFFERS; i++) {
 			ret = ipts_control_wait_data(ipts, false);
 			if (ret == -EAGAIN)
 				break;
@@ -126,7 +127,7 @@ static int ipts_receiver_event_loop(struct ipts_thread *thread)
 	return 0;
 }
 
-static int ipts_receiver_doorbell_loop(struct ipts_thread *thread)
+static int ipts_receiver_poll_loop(struct ipts_thread *thread)
 {
 	int ret = 0;
 	u32 buffer = 0;
@@ -145,7 +146,7 @@ static int ipts_receiver_doorbell_loop(struct ipts_thread *thread)
 	if (!ipts)
 		return -EFAULT;
 
-	dev_info(ipts->dev, "IPTS running in doorbell mode\n");
+	dev_info(ipts->dev, "IPTS running in poll mode\n");
 
 	while (true) {
 		if (ipts_thread_should_stop(thread)) {
@@ -217,9 +218,9 @@ int ipts_receiver_start(struct ipts_context *ipts)
 	if (ipts->mode == IPTS_MODE_EVENT) {
 		ret = ipts_thread_start(&ipts->receiver_loop, ipts_receiver_event_loop, ipts,
 					"ipts_event");
-	} else if (ipts->mode == IPTS_MODE_DOORBELL) {
-		ret = ipts_thread_start(&ipts->receiver_loop, ipts_receiver_doorbell_loop, ipts,
-					"ipts_doorbell");
+	} else if (ipts->mode == IPTS_MODE_POLL) {
+		ret = ipts_thread_start(&ipts->receiver_loop, ipts_receiver_poll_loop, ipts,
+					"ipts_poll");
 	} else {
 		ret = -EINVAL;
 	}
diff --git a/drivers/hid/ipts/receiver.h b/drivers/hid/ipts/receiver.h
index 96070f34fbca..3de7da62d40c 100644
--- a/drivers/hid/ipts/receiver.h
+++ b/drivers/hid/ipts/receiver.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/resources.c b/drivers/hid/ipts/resources.c
index 5e924d58c488..cc14653b2a9f 100644
--- a/drivers/hid/ipts/resources.c
+++ b/drivers/hid/ipts/resources.c
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include "desc.h"
@@ -107,10 +107,6 @@ int ipts_resources_init(struct ipts_resources *res, struct device *dev, size_t d
 
 int ipts_resources_free(struct ipts_resources *res)
 {
-	/*
-	 * Some compilers (AOSP clang) complain about a redefined
-	 * variable when this is declared inside of the for loop.
-	 */
 	int i = 0;
 
 	if (!res)
diff --git a/drivers/hid/ipts/resources.h b/drivers/hid/ipts/resources.h
index e0c400f420b9..2068e13285f0 100644
--- a/drivers/hid/ipts/resources.h
+++ b/drivers/hid/ipts/resources.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/spec-device.h b/drivers/hid/ipts/spec-device.h
index 93f673d981f7..41845f9d9025 100644
--- a/drivers/hid/ipts/spec-device.h
+++ b/drivers/hid/ipts/spec-device.h
@@ -109,14 +109,14 @@ static_assert(sizeof(struct ipts_command) == 324);
 
 /**
  * enum ipts_mode - Configures what data the device produces and how its sent.
- * @IPTS_MODE_EVENT:    The device will send an event once a buffer was filled.
- *                      Older devices will return singletouch data in this mode.
- * @IPTS_MODE_DOORBELL: The device will notify the driver by incrementing the doorbell value.
- *                      Older devices will return multitouch data in this mode.
+ * @IPTS_MODE_EVENT: The device will send an event once a buffer was filled.
+ *                   Older devices will return singletouch data in this mode.
+ * @IPTS_MODE_POLL:  The device will notify the driver by incrementing the doorbell value.
+ *                   Older devices will return multitouch data in this mode.
  */
 enum ipts_mode {
 	IPTS_MODE_EVENT = 0x00,
-	IPTS_MODE_DOORBELL = 0x01,
+	IPTS_MODE_POLL = 0x01,
 };
 
 /**
@@ -253,14 +253,19 @@ static_assert(sizeof(struct ipts_response) == 88);
 
 /**
  * struct ipts_device_info - Vendor information of the IPTS device.
- * @vendor:        Vendor ID of this device.
- * @product:       Product ID of this device.
- * @hw_version:    Hardware revision of this device.
- * @fw_version:    Firmware revision of this device.
- * @data_size:     Requested size for a data buffer.
- * @feedback_size: Requested size for a feedback buffer.
- * @mode:          Mode that the device currently operates in.
- * @max_contacts:  Maximum amount of concurrent touches the sensor can process.
+ * @vendor:         Vendor ID of this device.
+ * @product:        Product ID of this device.
+ * @hw_version:     Hardware revision of this device.
+ * @fw_version:     Firmware revision of this device.
+ * @data_size:      Requested size for a data buffer.
+ * @feedback_size:  Requested size for a feedback buffer.
+ * @mode:           Mode that the device currently operates in.
+ * @max_contacts:   Maximum amount of concurrent touches the sensor can process.
+ * @sensor_min_eds: The minimum EDS version supported by the sensor.
+ * @sensor_max_eds: The maximum EDS version supported by the sensor.
+ * @me_min_eds:     The minimum EDS version supported by the ME for communicating with the sensor.
+ * @me_max_eds:     The maximum EDS version supported by the ME for communicating with the sensor.
+ * @intf_eds:       The EDS version implemented by the interface between ME and host.
  */
 struct ipts_device_info {
 	u16 vendor;
diff --git a/drivers/hid/ipts/spec-hid.h b/drivers/hid/ipts/spec-hid.h
index ea70f29ff00c..5a58d4a0a610 100644
--- a/drivers/hid/ipts/spec-hid.h
+++ b/drivers/hid/ipts/spec-hid.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2020-2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/thread.c b/drivers/hid/ipts/thread.c
index 8b46f775c107..355e92bea26f 100644
--- a/drivers/hid/ipts/thread.c
+++ b/drivers/hid/ipts/thread.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
diff --git a/drivers/hid/ipts/thread.h b/drivers/hid/ipts/thread.h
index a314843599fc..1f966b8b32c4 100644
--- a/drivers/hid/ipts/thread.h
+++ b/drivers/hid/ipts/thread.h
@@ -1,6 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * Copyright (c) 2016 Intel Corporation
  * Copyright (c) 2023 Dorian Stoll
  *
  * Linux driver for Intel Precise Touch & Stylus
@@ -29,7 +28,7 @@ struct ipts_thread {
 	int (*threadfn)(struct ipts_thread *thread);
 };
 
-/*
+/**
  * ipts_thread_should_stop() - Returns true if the thread is asked to terminate.
  * @thread: The current thread.
  *
@@ -37,7 +36,7 @@ struct ipts_thread {
  */
 bool ipts_thread_should_stop(struct ipts_thread *thread);
 
-/*
+/**
  * ipts_thread_start() - Starts an IPTS thread.
  * @thread: The thread to initialize and start.
  * @threadfn: The function to execute.
@@ -49,7 +48,7 @@ bool ipts_thread_should_stop(struct ipts_thread *thread);
 int ipts_thread_start(struct ipts_thread *thread, int (*threadfn)(struct ipts_thread *thread),
 		      void *data, const char name[]);
 
-/*
+/**
  * ipts_thread_stop() - Asks the thread to terminate and waits until it has finished.
  * @thread: The thread that should stop.
  *
-- 
2.41.0