linux-surface/patches/6.10/0007-surface-sam.patch

From 5180e4810b868e0d3da85577b776a929cecf1d65 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Fri, 19 Apr 2024 20:41:47 +0200
Subject: [PATCH] platform/surface: aggregator: Fix warning when controller is
 destroyed in probe

There is a small window in ssam_serial_hub_probe() where the controller
is initialized but has not been started yet. Specifically, between
ssam_controller_init() and ssam_controller_start(). Any failure in this
window, for example caused by a failure of serdev_device_open(),
currently results in an incorrect warning being emitted.

In particular, any failure in this window results in the controller
being destroyed via ssam_controller_destroy(). This function checks the
state of the controller and, in an attempt to validate that the
controller has been cleanly shut down before we try and deallocate any
resources, emits a warning if that state is not SSAM_CONTROLLER_STOPPED.

However, since we have only just initialized the controller and have not
yet started it, its state is SSAM_CONTROLLER_INITIALIZED. Note that this
is the only point at which the controller has this state, as it will
change after we start the controller with ssam_controller_start() and
never revert back. Further, at this point no communication has taken
place and the sender and receiver threads have not been started yet (and
we may not even have an open serdev device either).

Therefore, it is perfectly safe to call ssam_controller_destroy() with a
state of SSAM_CONTROLLER_INITIALIZED. This, however, means that the
warning currently being emitted is incorrect. Fix it by extending the
check.

Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/aggregator/controller.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index 7fc602e01487..7e89f547999b 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -1354,7 +1354,8 @@ void ssam_controller_destroy(struct ssam_controller *ctrl)
 	if (ctrl->state == SSAM_CONTROLLER_UNINITIALIZED)
 		return;
 
-	WARN_ON(ctrl->state != SSAM_CONTROLLER_STOPPED);
+	WARN_ON(ctrl->state != SSAM_CONTROLLER_STOPPED &&
+		ctrl->state != SSAM_CONTROLLER_INITIALIZED);
 
 	/*
 	 * Note: New events could still have been received after the previous
-- 
2.45.2

From 144dbc865c07df0290009d509b31635aac53a907 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sun, 22 Oct 2023 14:57:11 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add support for
 Surface Laptop Go 3

Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_registry.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 1c4d74db08c9..f826489dc69d 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -395,6 +395,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Laptop Go 2 */
 	{ "MSHW0290", (unsigned long)ssam_node_group_slg1 },
 
+	/* Surface Laptop Go 3 */
+	{ "MSHW0440", (unsigned long)ssam_node_group_slg1 },
+
 	/* Surface Laptop Studio */
 	{ "MSHW0123", (unsigned long)ssam_node_group_sls },
 
-- 
2.45.2

From 7b906ae84a56322a5098c77a774f5fb00b4318a5 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Mon, 20 Nov 2023 19:47:00 +0100
Subject: [PATCH] platform/surface: aggregator_registry: Add support for
 Surface Laptop Studio 2

Add SAM client device nodes for the Surface Laptop Studio 2 (SLS2). The
SLS2 is quite similar to the SLS1, but it does not provide the touchpad
as a SAM-HID device. Therefore, add a new node group for the SLS2 and
update the comments accordingly

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 25 ++++++++++++++++---
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index f826489dc69d..ef59a7b66667 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -273,8 +273,8 @@ static const struct software_node *ssam_node_group_sl5[] = {
 	NULL,
 };
 
-/* Devices for Surface Laptop Studio. */
-static const struct software_node *ssam_node_group_sls[] = {
+/* Devices for Surface Laptop Studio 1. */
+static const struct software_node *ssam_node_group_sls1[] = {
 	&ssam_node_root,
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
@@ -289,6 +289,20 @@ static const struct software_node *ssam_node_group_sls[] = {
 	NULL,
 };
 
+/* Devices for Surface Laptop Studio 2. */
+static const struct software_node *ssam_node_group_sls2[] = {
+	&ssam_node_root,
+	&ssam_node_bat_ac,
+	&ssam_node_bat_main,
+	&ssam_node_tmp_pprof,
+	&ssam_node_pos_tablet_switch,
+	&ssam_node_hid_sam_keyboard,
+	&ssam_node_hid_sam_penstash,
+	&ssam_node_hid_sam_sensors,
+	&ssam_node_hid_sam_ucm_ucsi,
+	NULL,
+};
+
 /* Devices for Surface Laptop Go. */
 static const struct software_node *ssam_node_group_slg1[] = {
 	&ssam_node_root,
@@ -398,8 +412,11 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Laptop Go 3 */
 	{ "MSHW0440", (unsigned long)ssam_node_group_slg1 },
 
-	/* Surface Laptop Studio */
-	{ "MSHW0123", (unsigned long)ssam_node_group_sls },
+	/* Surface Laptop Studio 1 */
+	{ "MSHW0123", (unsigned long)ssam_node_group_sls1 },
+
+	/* Surface Laptop Studio 2 */
+	{ "MSHW0360", (unsigned long)ssam_node_group_sls2 },
 
 	{ },
 };
-- 
2.45.2

From d602c3714f0cc654b90de7800f844d6201eaa66b Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sun, 9 Jun 2024 20:05:57 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add support for
 Surface Laptop 6

Add SAM client device nodes for the Surface Laptop Studio 6 (SL6). The
SL6 is similar to the SL5, with the typical battery/AC, platform
profile, and HID nodes. It also has support for the newly supported fan
interface.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index ef59a7b66667..70a2ea5a1957 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -273,6 +273,22 @@ static const struct software_node *ssam_node_group_sl5[] = {
 	NULL,
 };
 
+/* Devices for Surface Laptop 6. */
+static const struct software_node *ssam_node_group_sl6[] = {
+	&ssam_node_root,
+	&ssam_node_bat_ac,
+	&ssam_node_bat_main,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_tmp_sensors,
+	&ssam_node_fan_speed,
+	&ssam_node_hid_main_keyboard,
+	&ssam_node_hid_main_touchpad,
+	&ssam_node_hid_main_iid5,
+	&ssam_node_hid_sam_sensors,
+	&ssam_node_hid_sam_ucm_ucsi,
+	NULL,
+};
+
 /* Devices for Surface Laptop Studio 1. */
 static const struct software_node *ssam_node_group_sls1[] = {
 	&ssam_node_root,
@@ -403,6 +419,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Laptop 5 */
 	{ "MSHW0350", (unsigned long)ssam_node_group_sl5 },
 
+	/* Surface Laptop 6 */
+	{ "MSHW0530", (unsigned long)ssam_node_group_sl5 },
+
 	/* Surface Laptop Go 1 */
 	{ "MSHW0118", (unsigned long)ssam_node_group_slg1 },
 
-- 
2.45.2

From 4bde7be038c7dced1b596c7d41e6f0bb3043d301 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 30 Dec 2023 18:07:54 +0100
Subject: [PATCH] hwmon: Add thermal sensor driver for Surface Aggregator
 Module

Some of the newer Microsoft Surface devices (such as the Surface Book
3 and Pro 9) have thermal sensors connected via the Surface Aggregator
Module (the embedded controller on those devices). Add a basic driver
to read out the temperature values of those sensors.

Link: https://github.com/linux-surface/surface-aggregator-module/issues/59
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/hwmon/Kconfig        |  10 +++
 drivers/hwmon/Makefile       |   1 +
 drivers/hwmon/surface_temp.c | 165 +++++++++++++++++++++++++++++++++++
 3 files changed, 176 insertions(+)
 create mode 100644 drivers/hwmon/surface_temp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e14ae18a973b..76eabe3e4435 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2093,6 +2093,16 @@ config SENSORS_SURFACE_FAN
 
 	  Select M or Y here, if you want to be able to read the fan's speed.
 
+config SENSORS_SURFACE_TEMP
+	tristate "Microsoft Surface Thermal Sensor Driver"
+	depends on SURFACE_AGGREGATOR
+	help
+	  Driver for monitoring thermal sensors connected via the Surface
+	  Aggregator Module (embedded controller) on Microsoft Surface devices.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called surface_temp.
+
 config SENSORS_ADC128D818
 	tristate "Texas Instruments ADC128D818"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index e3f25475d1f0..eff74ab7f720 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -209,6 +209,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
 obj-$(CONFIG_SENSORS_SURFACE_FAN)+= surface_fan.o
+obj-$(CONFIG_SENSORS_SURFACE_TEMP)+= surface_temp.o
 obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
diff --git a/drivers/hwmon/surface_temp.c b/drivers/hwmon/surface_temp.c
new file mode 100644
index 000000000000..48c3e826713f
--- /dev/null
+++ b/drivers/hwmon/surface_temp.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Thermal sensor subsystem driver for Surface System Aggregator Module (SSAM).
+ *
+ * Copyright (C) 2022-2023 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SAM interface. -------------------------------------------------------- */
+
+SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_tmp_get_available_sensors, __le16, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x04,
+});
+
+SSAM_DEFINE_SYNC_REQUEST_MD_R(__ssam_tmp_get_temperature, __le16, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x01,
+});
+
+static int ssam_tmp_get_available_sensors(struct ssam_device *sdev, s16 *sensors)
+{
+	__le16 sensors_le;
+	int status;
+
+	status = __ssam_tmp_get_available_sensors(sdev, &sensors_le);
+	if (status)
+		return status;
+
+	*sensors = le16_to_cpu(sensors_le);
+	return 0;
+}
+
+static int ssam_tmp_get_temperature(struct ssam_device *sdev, u8 iid, long *temperature)
+{
+	__le16 temp_le;
+	int status;
+
+	status = __ssam_tmp_get_temperature(sdev->ctrl, sdev->uid.target, iid, &temp_le);
+	if (status)
+		return status;
+
+	/* Convert 1/10 °K to 1/1000 °C */
+	*temperature = (le16_to_cpu(temp_le) - 2731) * 100L;
+	return 0;
+}
+
+
+/* -- Driver.---------------------------------------------------------------- */
+
+struct ssam_temp {
+	struct ssam_device *sdev;
+	s16 sensors;
+};
+
+static umode_t ssam_temp_hwmon_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	const struct ssam_temp *ssam_temp = data;
+
+	if (!(ssam_temp->sensors & BIT(channel)))
+		return 0;
+
+	return 0444;
+}
+
+static int ssam_temp_hwmon_read(struct device *dev,
+				enum hwmon_sensor_types type,
+				u32 attr, int channel, long *value)
+{
+	const struct ssam_temp *ssam_temp = dev_get_drvdata(dev);
+
+	return ssam_tmp_get_temperature(ssam_temp->sdev, channel + 1, value);
+}
+
+static const struct hwmon_channel_info * const ssam_temp_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(chip,
+			   HWMON_C_REGISTER_TZ),
+	/* We have at most 16 thermal sensor channels. */
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops ssam_temp_hwmon_ops = {
+	.is_visible = ssam_temp_hwmon_is_visible,
+	.read = ssam_temp_hwmon_read,
+};
+
+static const struct hwmon_chip_info ssam_temp_hwmon_chip_info = {
+	.ops = &ssam_temp_hwmon_ops,
+	.info = ssam_temp_hwmon_info,
+};
+
+static int ssam_temp_probe(struct ssam_device *sdev)
+{
+	struct ssam_temp *ssam_temp;
+	struct device *hwmon_dev;
+	s16 sensors;
+	int status;
+
+	status = ssam_tmp_get_available_sensors(sdev, &sensors);
+	if (status)
+		return status;
+
+	ssam_temp = devm_kzalloc(&sdev->dev, sizeof(*ssam_temp), GFP_KERNEL);
+	if (!ssam_temp)
+		return -ENOMEM;
+
+	ssam_temp->sdev = sdev;
+	ssam_temp->sensors = sensors;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&sdev->dev,
+			"surface_thermal", ssam_temp, &ssam_temp_hwmon_chip_info,
+			NULL);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	return 0;
+}
+
+static const struct ssam_device_id ssam_temp_match[] = {
+	{ SSAM_SDEV(TMP, SAM, 0x00, 0x02) },
+	{ },
+};
+MODULE_DEVICE_TABLE(ssam, ssam_temp_match);
+
+static struct ssam_device_driver ssam_temp = {
+	.probe = ssam_temp_probe,
+	.match_table = ssam_temp_match,
+	.driver = {
+		.name = "surface_temp",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_ssam_device_driver(ssam_temp);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Thermal sensor subsystem driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
-- 
2.45.2

From ae82a35c632785771ebe2ad7f48006a1eb8f6a91 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 30 Dec 2023 18:12:23 +0100
Subject: [PATCH] hwmon: surface_temp: Add support for sensor names

The thermal subsystem of the Surface Aggregator Module allows us to
query the names of the respective thermal sensors. Forward those to
userspace.

Signed-off-by: Ivor Wanders <ivor@iwanders.net>
Co-Developed-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/hwmon/surface_temp.c | 113 +++++++++++++++++++++++++++++------
 1 file changed, 96 insertions(+), 17 deletions(-)

diff --git a/drivers/hwmon/surface_temp.c b/drivers/hwmon/surface_temp.c
index 48c3e826713f..4c08926139db 100644
--- a/drivers/hwmon/surface_temp.c
+++ b/drivers/hwmon/surface_temp.c
@@ -17,6 +17,27 @@
 
 /* -- SAM interface. -------------------------------------------------------- */
 
+/*
+ * Available sensors are indicated by a 16-bit bitfield, where a 1 marks the
+ * presence of a sensor. So we have at most 16 possible sensors/channels.
+ */
+#define SSAM_TMP_SENSOR_MAX_COUNT 16
+
+/*
+ * All names observed so far are 6 characters long, but there's only
+ * zeros after the name, so perhaps they can be longer. This number reflects
+ * the maximum zero-padded space observed in the returned buffer.
+ */
+#define SSAM_TMP_SENSOR_NAME_LENGTH 18
+
+struct ssam_tmp_get_name_rsp {
+	__le16 unknown1;
+	char unknown2;
+	char name[SSAM_TMP_SENSOR_NAME_LENGTH];
+} __packed;
+
+static_assert(sizeof(struct ssam_tmp_get_name_rsp) == 21);
+
 SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_tmp_get_available_sensors, __le16, {
 	.target_category = SSAM_SSH_TC_TMP,
 	.command_id      = 0x04,
@@ -27,6 +48,11 @@ SSAM_DEFINE_SYNC_REQUEST_MD_R(__ssam_tmp_get_temperature, __le16, {
 	.command_id      = 0x01,
 });
 
+SSAM_DEFINE_SYNC_REQUEST_MD_R(__ssam_tmp_get_name, struct ssam_tmp_get_name_rsp, {
+	.target_category = SSAM_SSH_TC_TMP,
+	.command_id      = 0x0e,
+});
+
 static int ssam_tmp_get_available_sensors(struct ssam_device *sdev, s16 *sensors)
 {
 	__le16 sensors_le;
@@ -54,12 +80,37 @@ static int ssam_tmp_get_temperature(struct ssam_device *sdev, u8 iid, long *temp
 	return 0;
 }
 
+static int ssam_tmp_get_name(struct ssam_device *sdev, u8 iid, char *buf, size_t buf_len)
+{
+	struct ssam_tmp_get_name_rsp name_rsp;
+	int status;
+
+	status =  __ssam_tmp_get_name(sdev->ctrl, sdev->uid.target, iid, &name_rsp);
+	if (status)
+		return status;
+
+	/*
+	 * This should not fail unless the name in the returned struct is not
+	 * null-terminated or someone changed something in the struct
+	 * definitions above, since our buffer and struct have the same
+	 * capacity by design. So if this fails blow this up with a warning.
+	 * Since the more likely cause is that the returned string isn't
+	 * null-terminated, we might have received garbage (as opposed to just
+	 * an incomplete string), so also fail the function.
+	 */
+	status = strscpy(buf, name_rsp.name, buf_len);
+	WARN_ON(status < 0);
+
+	return status < 0 ? status : 0;
+}
+
 
 /* -- Driver.---------------------------------------------------------------- */
 
 struct ssam_temp {
 	struct ssam_device *sdev;
 	s16 sensors;
+	char names[SSAM_TMP_SENSOR_MAX_COUNT][SSAM_TMP_SENSOR_NAME_LENGTH];
 };
 
 static umode_t ssam_temp_hwmon_is_visible(const void *data,
@@ -83,33 +134,47 @@ static int ssam_temp_hwmon_read(struct device *dev,
 	return ssam_tmp_get_temperature(ssam_temp->sdev, channel + 1, value);
 }
 
+static int ssam_temp_hwmon_read_string(struct device *dev,
+				       enum hwmon_sensor_types type,
+				       u32 attr, int channel, const char **str)
+{
+	const struct ssam_temp *ssam_temp = dev_get_drvdata(dev);
+
+	*str = ssam_temp->names[channel];
+	return 0;
+}
+
 static const struct hwmon_channel_info * const ssam_temp_hwmon_info[] = {
 	HWMON_CHANNEL_INFO(chip,
 			   HWMON_C_REGISTER_TZ),
-	/* We have at most 16 thermal sensor channels. */
+	/*
+	 * We have at most SSAM_TMP_SENSOR_MAX_COUNT = 16 thermal sensor
+	 * channels.
+	 */
 	HWMON_CHANNEL_INFO(temp,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT),
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
 	NULL
 };
 
 static const struct hwmon_ops ssam_temp_hwmon_ops = {
 	.is_visible = ssam_temp_hwmon_is_visible,
 	.read = ssam_temp_hwmon_read,
+	.read_string = ssam_temp_hwmon_read_string,
 };
 
 static const struct hwmon_chip_info ssam_temp_hwmon_chip_info = {
@@ -122,6 +187,7 @@ static int ssam_temp_probe(struct ssam_device *sdev)
 	struct ssam_temp *ssam_temp;
 	struct device *hwmon_dev;
 	s16 sensors;
+	int channel;
 	int status;
 
 	status = ssam_tmp_get_available_sensors(sdev, &sensors);
@@ -135,6 +201,19 @@ static int ssam_temp_probe(struct ssam_device *sdev)
 	ssam_temp->sdev = sdev;
 	ssam_temp->sensors = sensors;
 
+	/* Retrieve the name for each available sensor. */
+	for (channel = 0; channel < SSAM_TMP_SENSOR_MAX_COUNT; channel++)
+	{
+		if (!(sensors & BIT(channel)))
+			continue;
+
+		status = ssam_tmp_get_name(sdev, channel + 1,
+					   ssam_temp->names[channel],
+					   SSAM_TMP_SENSOR_NAME_LENGTH);
+		if (status)
+			return status;
+	}
+
 	hwmon_dev = devm_hwmon_device_register_with_info(&sdev->dev,
 			"surface_thermal", ssam_temp, &ssam_temp_hwmon_chip_info,
 			NULL);
-- 
2.45.2

From 6a80e0b93ce1d8cf9d1b7e383b4b951fb4908294 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Mon, 10 Jun 2024 21:47:47 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add fan and thermal
 sensor support for Surface Laptop 5

Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_registry.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 70a2ea5a1957..6b568804f70b 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -265,7 +265,9 @@ static const struct software_node *ssam_node_group_sl5[] = {
 	&ssam_node_root,
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
-	&ssam_node_tmp_perf_profile,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_tmp_sensors,
+	&ssam_node_fan_speed,
 	&ssam_node_hid_main_keyboard,
 	&ssam_node_hid_main_touchpad,
 	&ssam_node_hid_main_iid5,
-- 
2.45.2

From 3175ecd829a778ffef35956d8785877bb76fe4b0 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Mon, 10 Jun 2024 21:48:02 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add fan and thermal
 sensor support for Surface Laptop Studio 2

Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_registry.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 6b568804f70b..9046df95c043 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -312,7 +312,9 @@ static const struct software_node *ssam_node_group_sls2[] = {
 	&ssam_node_root,
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
-	&ssam_node_tmp_pprof,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_tmp_sensors,
+	&ssam_node_fan_speed,
 	&ssam_node_pos_tablet_switch,
 	&ssam_node_hid_sam_keyboard,
 	&ssam_node_hid_sam_penstash,
-- 
2.45.2

From aeef49471d7ec17f243c685b85c0c870c99e9e3d Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Fri, 28 Jun 2024 22:31:37 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add Support for
 Surface Pro 10

Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 9046df95c043..058f4edd8b66 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -377,6 +377,25 @@ static const struct software_node *ssam_node_group_sp9[] = {
 	NULL,
 };
 
+/* Devices for Surface Pro 10 */
+static const struct software_node *ssam_node_group_sp10[] = {
+	&ssam_node_root,
+	&ssam_node_hub_kip,
+	&ssam_node_bat_ac,
+	&ssam_node_bat_main,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_tmp_sensors,
+	&ssam_node_fan_speed,
+	&ssam_node_pos_tablet_switch,
+	&ssam_node_hid_kip_keyboard,
+	&ssam_node_hid_kip_penstash,
+	&ssam_node_hid_kip_touchpad,
+	&ssam_node_hid_kip_fwupd,
+	&ssam_node_hid_sam_sensors,
+	&ssam_node_hid_sam_ucm_ucsi,
+	NULL,
+};
+
 
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
@@ -399,6 +418,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Pro 9 */
 	{ "MSHW0343", (unsigned long)ssam_node_group_sp9 },
 
+	/* Surface Pro 10 */
+	{ "MSHW0510", (unsigned long)ssam_node_group_sp10 },
+
 	/* Surface Book 2 */
 	{ "MSHW0107", (unsigned long)ssam_node_group_gen5 },
 
-- 
2.45.2