linux-surface/patches/5.18/0005-surface-sam.patch

From 11cb4f8c05666e7092892e306e22b5e0b2d1c91b Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Tue, 8 Jun 2021 00:24:47 +0200
Subject: [PATCH] platform/surface: aggregator: Allow devices to be marked as
 hot-removed

Some SSAM devices, notably the keyboard cover (keyboard and touchpad) on
the Surface Pro 8, can be hot-removed. When this occurs, communication
with the device may fail and time out. This timeout can unnecessarily
block and slow down device removal and even cause issues when the
devices are detached and re-attached quickly. Thus, communication should
generally be avoided once hot-removal is detected.

While we already remove a device as soon as we detect its (hot-)removal,
the corresponding device driver may still attempt to communicate with
the device during teardown. This is especially critical as communication
failure may also extend to disabling of events, which is typically done
at that stage.

Add a flag to allow marking devices as hot-removed. This can then be
used during client driver teardown to check if any communication
attempts should be avoided.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 include/linux/surface_aggregator/device.h | 48 +++++++++++++++++++++--
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index cc257097eb05..491aa7e9f4bc 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -148,17 +148,30 @@ struct ssam_device_uid {
 #define SSAM_SDEV(cat, tid, iid, fun) \
 	SSAM_DEVICE(SSAM_DOMAIN_SERIALHUB, SSAM_SSH_TC_##cat, tid, iid, fun)
 
+/*
+ * enum ssam_device_flags - Flags for SSAM client devices.
+ * @SSAM_DEVICE_HOT_REMOVED_BIT:
+ *	The device has been hot-removed. Further communication with it may time
+ *	out and should be avoided.
+ */
+enum ssam_device_flags {
+	SSAM_DEVICE_HOT_REMOVED_BIT = 0,
+};
+
 /**
  * struct ssam_device - SSAM client device.
- * @dev:  Driver model representation of the device.
- * @ctrl: SSAM controller managing this device.
- * @uid:  UID identifying the device.
+ * @dev:   Driver model representation of the device.
+ * @ctrl:  SSAM controller managing this device.
+ * @uid:   UID identifying the device.
+ * @flags: Device state flags, see &enum ssam_device_flags.
  */
 struct ssam_device {
 	struct device dev;
 	struct ssam_controller *ctrl;
 
 	struct ssam_device_uid uid;
+
+	unsigned long flags;
 };
 
 /**
@@ -240,6 +253,35 @@ struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl,
 int ssam_device_add(struct ssam_device *sdev);
 void ssam_device_remove(struct ssam_device *sdev);
 
+/**
+ * ssam_device_mark_hot_removed() - Mark the given device as hot-removed.
+ * @sdev: The device to mark as hot-removed.
+ *
+ * Mark the device as having been hot-removed. This signals drivers using the
+ * device that communication with the device should be avoided and may lead to
+ * timeouts.
+ */
+static inline void ssam_device_mark_hot_removed(struct ssam_device *sdev)
+{
+	dev_dbg(&sdev->dev, "marking device as hot-removed\n");
+	set_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
+/**
+ * ssam_device_is_hot_removed() - Check if the given device has been
+ * hot-removed.
+ * @sdev: The device to check.
+ *
+ * Checks if the given device has been marked as hot-removed. See
+ * ssam_device_mark_hot_removed() for more details.
+ *
+ * Return: Returns ``true`` if the device has been marked as hot-removed.
+ */
+static inline bool ssam_device_is_hot_removed(struct ssam_device *sdev)
+{
+	return test_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
 /**
  * ssam_device_get() - Increment reference count of SSAM client device.
  * @sdev: The device to increment the reference count of.
-- 
2.36.1

From 69be483916d47a555690ce409e620cb39e9b0c3e Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Tue, 8 Jun 2021 00:48:22 +0200
Subject: [PATCH] platform/surface: aggregator: Allow notifiers to avoid
 communication on unregistering

When SSAM client devices have been (physically) hot-removed,
communication attempts with those devices may fail and time out. This
can even extend to event notifiers, due to which timeouts may occur
during device removal, slowing down that process.

Add a parameter to the notifier unregister function that allows skipping
communication with the EC to prevent this. Furthermore, add wrappers for
registering and unregistering notifiers belonging to SSAM client devices
that automatically check if the device has been marked as hot-removed
and communication should be avoided.

Note that non-SSAM client devices can generally not be hot-removed, so
also add a convenience wrapper for those, defaulting to allow
communication.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../driver-api/surface_aggregator/client.rst  |  6 +-
 .../platform/surface/aggregator/controller.c  | 53 ++++++++++-----
 include/linux/surface_aggregator/controller.h | 24 ++++++-
 include/linux/surface_aggregator/device.h     | 66 +++++++++++++++++++
 4 files changed, 128 insertions(+), 21 deletions(-)

diff --git a/Documentation/driver-api/surface_aggregator/client.rst b/Documentation/driver-api/surface_aggregator/client.rst
index e519d374c378..27f95abdbe99 100644
--- a/Documentation/driver-api/surface_aggregator/client.rst
+++ b/Documentation/driver-api/surface_aggregator/client.rst
@@ -17,6 +17,8 @@
 .. |SSAM_DEVICE| replace:: :c:func:`SSAM_DEVICE`
 .. |ssam_notifier_register| replace:: :c:func:`ssam_notifier_register`
 .. |ssam_notifier_unregister| replace:: :c:func:`ssam_notifier_unregister`
+.. |ssam_device_notifier_register| replace:: :c:func:`ssam_device_notifier_register`
+.. |ssam_device_notifier_unregister| replace:: :c:func:`ssam_device_notifier_unregister`
 .. |ssam_request_sync| replace:: :c:func:`ssam_request_sync`
 .. |ssam_event_mask| replace:: :c:type:`enum ssam_event_mask <ssam_event_mask>`
 
@@ -312,7 +314,9 @@ Handling Events
 To receive events from the SAM EC, an event notifier must be registered for
 the desired event via |ssam_notifier_register|. The notifier must be
 unregistered via |ssam_notifier_unregister| once it is not required any
-more.
+more. For |ssam_device| type clients, the |ssam_device_notifier_register| and
+|ssam_device_notifier_unregister| wrappers should be preferred as they properly
+handle hot-removal of client devices.
 
 Event notifiers are registered by providing (at minimum) a callback to call
 in case an event has been received, the registry specifying how the event
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index b8c377b3f932..6de834b52b63 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -2199,16 +2199,26 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
 }
 
 /**
- * ssam_nf_refcount_disable_free() - Disable event for reference count entry if it is
- * no longer in use and free the corresponding entry.
+ * ssam_nf_refcount_disable_free() - Disable event for reference count entry if
+ * it is no longer in use and free the corresponding entry.
  * @ctrl:  The controller to disable the event on.
  * @entry: The reference count entry for the event to be disabled.
  * @flags: The flags used for enabling the event on the EC.
+ * @ec:    Flag specifying if the event should actually be disabled on the EC.
  *
- * If the reference count equals zero, i.e. the event is no longer requested by
- * any client, the event will be disabled and the corresponding reference count
- * entry freed. The reference count entry must not be used any more after a
- * call to this function.
+ * If ``ec`` equals ``true`` and the reference count equals zero (i.e. the
+ * event is no longer requested by any client), the specified event will be
+ * disabled on the EC via the corresponding request.
+ *
+ * If ``ec`` equals ``false``, no request will be sent to the EC and the event
+ * can be considered in a detached state (i.e. no longer used but still
+ * enabled). Disabling an event via this method may be required for
+ * hot-removable devices, where event disable requests may time out after the
+ * device has been physically removed.
+ *
+ * In both cases, if the reference count equals zero, the corresponding
+ * reference count entry will be freed. The reference count entry must not be
+ * used any more after a call to this function.
  *
  * Also checks if the flags used for disabling the event match the flags used
  * for enabling the event and warns if they do not (regardless of reference
@@ -2223,7 +2233,7 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
  * returns the status of the event-enable EC command.
  */
 static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
-					 struct ssam_nf_refcount_entry *entry, u8 flags)
+					 struct ssam_nf_refcount_entry *entry, u8 flags, bool ec)
 {
 	const struct ssam_event_registry reg = entry->key.reg;
 	const struct ssam_event_id id = entry->key.id;
@@ -2232,8 +2242,9 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
 
 	lockdep_assert_held(&nf->lock);
 
-	ssam_dbg(ctrl, "disabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
-		 reg.target_category, id.target_category, id.instance, entry->refcount);
+	ssam_dbg(ctrl, "%s event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
+		 ec ? "disabling" : "detaching", reg.target_category, id.target_category,
+		 id.instance, entry->refcount);
 
 	if (entry->flags != flags) {
 		ssam_warn(ctrl,
@@ -2242,7 +2253,7 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
 			  id.instance);
 	}
 
-	if (entry->refcount == 0) {
+	if (ec && entry->refcount == 0) {
 		status = ssam_ssh_event_disable(ctrl, reg, id, flags);
 		kfree(entry);
 	}
@@ -2322,20 +2333,26 @@ int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notif
 EXPORT_SYMBOL_GPL(ssam_notifier_register);
 
 /**
- * ssam_notifier_unregister() - Unregister an event notifier.
- * @ctrl: The controller the notifier has been registered on.
- * @n:    The event notifier to unregister.
+ * __ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl:    The controller the notifier has been registered on.
+ * @n:       The event notifier to unregister.
+ * @disable: Whether to disable the corresponding event on the EC.
  *
  * Unregister an event notifier. Decrement the usage counter of the associated
  * SAM event if the notifier is not marked as an observer. If the usage counter
- * reaches zero, the event will be disabled.
+ * reaches zero and ``disable`` equals ``true``, the event will be disabled.
+ *
+ * Useful for hot-removable devices, where communication may fail once the
+ * device has been physically removed. In that case, specifying ``disable`` as
+ * ``false`` avoids communication with the EC.
  *
  * Return: Returns zero on success, %-ENOENT if the given notifier block has
  * not been registered on the controller. If the given notifier block was the
  * last one associated with its specific event, returns the status of the
  * event-disable EC-command.
  */
-int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n)
+int __ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n,
+			       bool disable)
 {
 	u16 rqid = ssh_tc_to_rqid(n->event.id.target_category);
 	struct ssam_nf_refcount_entry *entry;
@@ -2373,7 +2390,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not
 			goto remove;
 		}
 
-		status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags);
+		status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags, disable);
 	}
 
 remove:
@@ -2383,7 +2400,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not
 
 	return status;
 }
-EXPORT_SYMBOL_GPL(ssam_notifier_unregister);
+EXPORT_SYMBOL_GPL(__ssam_notifier_unregister);
 
 /**
  * ssam_controller_event_enable() - Enable the specified event.
@@ -2477,7 +2494,7 @@ int ssam_controller_event_disable(struct ssam_controller *ctrl,
 		return -ENOENT;
 	}
 
-	status = ssam_nf_refcount_disable_free(ctrl, entry, flags);
+	status = ssam_nf_refcount_disable_free(ctrl, entry, flags, true);
 
 	mutex_unlock(&nf->lock);
 	return status;
diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h
index 74bfdffaf7b0..50a2b4926c06 100644
--- a/include/linux/surface_aggregator/controller.h
+++ b/include/linux/surface_aggregator/controller.h
@@ -835,8 +835,28 @@ struct ssam_event_notifier {
 int ssam_notifier_register(struct ssam_controller *ctrl,
 			   struct ssam_event_notifier *n);
 
-int ssam_notifier_unregister(struct ssam_controller *ctrl,
-			     struct ssam_event_notifier *n);
+int __ssam_notifier_unregister(struct ssam_controller *ctrl,
+			       struct ssam_event_notifier *n, bool disable);
+
+/**
+ * ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl:    The controller the notifier has been registered on.
+ * @n:       The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_notifier_unregister(struct ssam_controller *ctrl,
+					   struct ssam_event_notifier *n)
+{
+	return __ssam_notifier_unregister(ctrl, n, true);
+}
 
 int ssam_controller_event_enable(struct ssam_controller *ctrl,
 				 struct ssam_event_registry reg,
diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index 491aa7e9f4bc..ad245c6b00d0 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -472,4 +472,70 @@ static inline void ssam_remove_clients(struct device *dev) {}
 				    sdev->uid.instance, ret);		\
 	}
 
+
+/* -- Helpers for client-device notifiers. ---------------------------------- */
+
+/**
+ * ssam_device_notifier_register() - Register an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier should be registered on.
+ * @n:    The event notifier to register.
+ *
+ * Register an event notifier. Increment the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the event is not
+ * marked as an observer and is currently not enabled, it will be enabled
+ * during this call. If the notifier is marked as an observer, no attempt will
+ * be made at enabling any event and no reference count will be modified.
+ *
+ * Notifiers marked as observers do not need to be associated with one specific
+ * event, i.e. as long as no event matching is performed, only the event target
+ * category needs to be set.
+ *
+ * Return: Returns zero on success, %-ENOSPC if there have already been
+ * %INT_MAX notifiers for the event ID/type associated with the notifier block
+ * registered, %-ENOMEM if the corresponding event entry could not be
+ * allocated, %-ENODEV if the device is marked as hot-removed. If this is the
+ * first time that a notifier block is registered for the specific associated
+ * event, returns the status of the event-enable EC-command.
+ */
+static inline int ssam_device_notifier_register(struct ssam_device *sdev,
+						struct ssam_event_notifier *n)
+{
+	/*
+	 * Note that this check does not provide any guarantees whatsoever as
+	 * hot-removal could happen at any point and we can't protect against
+	 * it. Nevertheless, if we can detect hot-removal, bail early to avoid
+	 * communication timeouts.
+	 */
+	if (ssam_device_is_hot_removed(sdev))
+		return -ENODEV;
+
+	return ssam_notifier_register(sdev->ctrl, n);
+}
+
+/**
+ * ssam_device_notifier_unregister() - Unregister an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier has been registered on.
+ * @n:    The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * In case the device has been marked as hot-removed, the event will not be
+ * disabled on the EC, as in those cases any attempt at doing so may time out.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_device_notifier_unregister(struct ssam_device *sdev,
+						  struct ssam_event_notifier *n)
+{
+	return __ssam_notifier_unregister(sdev->ctrl, n,
+					  !ssam_device_is_hot_removed(sdev));
+}
+
 #endif /* _LINUX_SURFACE_AGGREGATOR_DEVICE_H */
-- 
2.36.1

From 01a341b88606f2e4523134a2ec17a21b7c252370 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Tue, 8 Jun 2021 01:20:49 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Use client device
 wrappers for notifier registration

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_registry.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index ce2bd88feeaa..9f630e890ff7 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -468,7 +468,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 
 	ssam_device_set_drvdata(sdev, hub);
 
-	status = ssam_notifier_register(sdev->ctrl, &hub->notif);
+	status = ssam_device_notifier_register(sdev, &hub->notif);
 	if (status)
 		return status;
 
@@ -480,7 +480,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 	return 0;
 
 err:
-	ssam_notifier_unregister(sdev->ctrl, &hub->notif);
+	ssam_device_notifier_unregister(sdev, &hub->notif);
 	cancel_delayed_work_sync(&hub->update_work);
 	ssam_remove_clients(&sdev->dev);
 	return status;
@@ -492,7 +492,7 @@ static void ssam_base_hub_remove(struct ssam_device *sdev)
 
 	sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group);
 
-	ssam_notifier_unregister(sdev->ctrl, &hub->notif);
+	ssam_device_notifier_unregister(sdev, &hub->notif);
 	cancel_delayed_work_sync(&hub->update_work);
 	ssam_remove_clients(&sdev->dev);
 }
-- 
2.36.1

From 337f42d4d9482d3d1fcc81f86e0615b7dbed8f43 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Thu, 28 Oct 2021 03:37:06 +0200
Subject: [PATCH] power/supply: surface_charger: Use client device wrappers for
 notifier registration

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/power/supply/surface_charger.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c
index a060c36c7766..59182d55742d 100644
--- a/drivers/power/supply/surface_charger.c
+++ b/drivers/power/supply/surface_charger.c
@@ -216,7 +216,7 @@ static int spwr_ac_register(struct spwr_ac_device *ac)
 	if (IS_ERR(ac->psy))
 		return PTR_ERR(ac->psy);
 
-	return ssam_notifier_register(ac->sdev->ctrl, &ac->notif);
+	return ssam_device_notifier_register(ac->sdev, &ac->notif);
 }
 
 
@@ -251,7 +251,7 @@ static void surface_ac_remove(struct ssam_device *sdev)
 {
 	struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev);
 
-	ssam_notifier_unregister(sdev->ctrl, &ac->notif);
+	ssam_device_notifier_unregister(sdev, &ac->notif);
 }
 
 static const struct spwr_psy_properties spwr_psy_props_adp1 = {
-- 
2.36.1

From bcd638f85b4838e83cff7df5e6b84f6d2a72a4c2 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Thu, 28 Oct 2021 03:38:09 +0200
Subject: [PATCH] power/supply: surface_battery: Use client device wrappers for
 notifier registration

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/power/supply/surface_battery.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c
index 5ec2e6bb2465..540707882bb0 100644
--- a/drivers/power/supply/surface_battery.c
+++ b/drivers/power/supply/surface_battery.c
@@ -802,7 +802,7 @@ static int spwr_battery_register(struct spwr_battery_device *bat)
 	if (IS_ERR(bat->psy))
 		return PTR_ERR(bat->psy);
 
-	return ssam_notifier_register(bat->sdev->ctrl, &bat->notif);
+	return ssam_device_notifier_register(bat->sdev, &bat->notif);
 }
 
 
@@ -837,7 +837,7 @@ static void surface_battery_remove(struct ssam_device *sdev)
 {
 	struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev);
 
-	ssam_notifier_unregister(sdev->ctrl, &bat->notif);
+	ssam_device_notifier_unregister(sdev, &bat->notif);
 	cancel_delayed_work_sync(&bat->update_work);
 }
 
-- 
2.36.1

From cd0d0fd5cb8891a768117a4b942930fdd948daa4 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Tue, 8 Jun 2021 01:33:02 +0200
Subject: [PATCH] HID: surface-hid: Add support for hot-removal

Add support for hot-removal of SSAM HID client devices.

Once a device has been hot-removed, further communication with it should
be avoided as it may fail and time out. While the device will be removed
as soon as we detect hot-removal, communication may still occur during
teardown, especially when unregistering notifiers.

While hot-removal is a surprise event that can happen at any time, try
to avoid communication as much as possible once it has been detected to
prevent timeouts that can slow down device removal and cause issues,
e.g. when quickly re-attaching the device.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/hid/surface-hid/surface_hid_core.c | 38 +++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/surface-hid/surface_hid_core.c b/drivers/hid/surface-hid/surface_hid_core.c
index e46330b2e561..87637f813de2 100644
--- a/drivers/hid/surface-hid/surface_hid_core.c
+++ b/drivers/hid/surface-hid/surface_hid_core.c
@@ -19,12 +19,30 @@
 #include "surface_hid_core.h"
 
 
+/* -- Utility functions. ---------------------------------------------------- */
+
+static bool surface_hid_is_hot_removed(struct surface_hid_device *shid)
+{
+	/*
+	 * Non-ssam client devices, i.e. platform client devices, cannot be
+	 * hot-removed.
+	 */
+	if (!is_ssam_device(shid->dev))
+		return false;
+
+	return ssam_device_is_hot_removed(to_ssam_device(shid->dev));
+}
+
+
 /* -- Device descriptor access. --------------------------------------------- */
 
 static int surface_hid_load_hid_descriptor(struct surface_hid_device *shid)
 {
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_HID,
 			(u8 *)&shid->hid_desc, sizeof(shid->hid_desc));
 	if (status)
@@ -61,6 +79,9 @@ static int surface_hid_load_device_attributes(struct surface_hid_device *shid)
 {
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_ATTRS,
 			(u8 *)&shid->attrs, sizeof(shid->attrs));
 	if (status)
@@ -88,9 +109,18 @@ static int surface_hid_start(struct hid_device *hid)
 static void surface_hid_stop(struct hid_device *hid)
 {
 	struct surface_hid_device *shid = hid->driver_data;
+	bool hot_removed;
+
+	/*
+	 * Communication may fail for devices that have been hot-removed. This
+	 * also includes unregistration of HID events, so we need to check this
+	 * here. Only if the device has not been marked as hot-removed, we can
+	 * safely disable events.
+	 */
+	hot_removed = surface_hid_is_hot_removed(shid);
 
 	/* Note: This call will log errors for us, so ignore them here. */
-	ssam_notifier_unregister(shid->ctrl, &shid->notif);
+	__ssam_notifier_unregister(shid->ctrl, &shid->notif, !hot_removed);
 }
 
 static int surface_hid_open(struct hid_device *hid)
@@ -109,6 +139,9 @@ static int surface_hid_parse(struct hid_device *hid)
 	u8 *buf;
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	buf = kzalloc(len, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -126,6 +159,9 @@ static int surface_hid_raw_request(struct hid_device *hid, unsigned char reportn
 {
 	struct surface_hid_device *shid = hid->driver_data;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT)
 		return shid->ops.output_report(shid, reportnum, buf, len);
 
-- 
2.36.1

From 3c1d8a475299af30b1a048d1b256374284aae1b7 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sun, 31 Oct 2021 12:34:08 +0100
Subject: [PATCH] platform/surface: aggregator: Add comment for KIP subsystem
 category

The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) handles detachable peripherals such as the
keyboard cover on the Surface Pro X and Surface Pro 8.

It is currently not entirely clear what this subsystem entails, but at
the very least it provides event notifications for when the keyboard
cover on the Surface Pro X and Surface Pro 8 have been detached or
re-attached, as well as the state that the keyboard cover is currently
in (e.g. folded-back, folded laptop-like, closed, etc.).

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 include/linux/surface_aggregator/serial_hub.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h
index c3de43edcffa..26b95ec12733 100644
--- a/include/linux/surface_aggregator/serial_hub.h
+++ b/include/linux/surface_aggregator/serial_hub.h
@@ -306,7 +306,7 @@ enum ssam_ssh_tc {
 	SSAM_SSH_TC_LPC = 0x0b,
 	SSAM_SSH_TC_TCL = 0x0c,
 	SSAM_SSH_TC_SFL = 0x0d,
-	SSAM_SSH_TC_KIP = 0x0e,
+	SSAM_SSH_TC_KIP = 0x0e,	/* Manages detachable peripherals (Pro X/8 keyboard cover) */
 	SSAM_SSH_TC_EXT = 0x0f,
 	SSAM_SSH_TC_BLD = 0x10,
 	SSAM_SSH_TC_BAS = 0x11,	/* Detachment system (Surface Book 2/3). */
-- 
2.36.1

From e6e17e3230c3d67976b698b1ee055d7c8ed39e42 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Fri, 29 Apr 2022 22:42:32 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Generify subsystem hub
 functionality

The Surface System Aggregator Module (SSAM) has multiple subsystems that
can manage detachable devices. At the moment, we only support the "base"
(BAS/0x11) subsystem, which is used on the Surface Book 3 to manage
devices (including keyboard, touchpad, and secondary battery) connected
to the base of the device.

The Surface Pro 8 has a new type-cover with keyboard and touchpad, which
is managed via the KIP/0x0e subsystem. The general procedure is the
same, but with slightly different events and setup. To make
implementation of the KIP hub easier and prevent duplication, generify
the parts of the base hub that we can use for the KIP hub (or any
potential future subsystem hubs).

This also switches over to use the newly introduced "hot-remove"
functionality, which should prevent communication issues when devices
have been detached.

Lastly, also drop the undocumented and unused sysfs "state" attribute of
the base hub. It has at best been useful for debugging.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 269 ++++++++++--------
 1 file changed, 153 insertions(+), 116 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 9f630e890ff7..09cbeee2428b 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -308,30 +308,159 @@ static int ssam_hub_register_clients(struct device *parent, struct ssam_controll
 }
 
 
-/* -- SSAM base-hub driver. ------------------------------------------------- */
+/* -- SSAM generic subsystem hub driver framework. -------------------------- */
 
-/*
- * Some devices (especially battery) may need a bit of time to be fully usable
- * after being (re-)connected. This delay has been determined via
- * experimentation.
- */
-#define SSAM_BASE_UPDATE_CONNECT_DELAY		msecs_to_jiffies(2500)
+enum ssam_hub_state {
+	SSAM_HUB_UNINITIALIZED,		/* Only set during initialization. */
+	SSAM_HUB_CONNECTED,
+	SSAM_HUB_DISCONNECTED,
+};
 
-enum ssam_base_hub_state {
-	SSAM_BASE_HUB_UNINITIALIZED,
-	SSAM_BASE_HUB_CONNECTED,
-	SSAM_BASE_HUB_DISCONNECTED,
+enum ssam_hub_flags {
+	SSAM_HUB_HOT_REMOVED,
 };
 
-struct ssam_base_hub {
+struct ssam_hub {
 	struct ssam_device *sdev;
 
-	enum ssam_base_hub_state state;
+	enum ssam_hub_state state;
+	unsigned long flags;
+
 	struct delayed_work update_work;
+	unsigned long connect_delay;
 
 	struct ssam_event_notifier notif;
+
+	int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
 };
 
+static void ssam_hub_update_workfn(struct work_struct *work)
+{
+	struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
+	struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
+	enum ssam_hub_state state;
+	int status = 0;
+
+	status = hub->get_state(hub, &state);
+	if (status)
+		return;
+
+	/*
+	 * There is a small possibility that hub devices were hot-removed and
+	 * re-added before we were able to remove them here. In that case, both
+	 * the state returned by get_state() and the state of the hub will
+	 * equal SSAM_HUB_CONNECTED and we would bail early below, which would
+	 * leave child devices without proper (re-)initialization and the
+	 * hot-remove flag set.
+	 *
+	 * Therefore, we check whether devices have been hot-removed via an
+	 * additional flag on the hub and, in this case, override the returned
+	 * hub state. In case of a missed disconnect (i.e. get_state returned
+	 * "connected"), we further need to re-schedule this work (with the
+	 * appropriate delay) as the actual connect work submission might have
+	 * been merged with this one.
+	 *
+	 * This then leads to one of two cases: Either we submit an unnecessary
+	 * work item (which will get ignored via either the queue or the state
+	 * checks) or, in the unlikely case that the work is actually required,
+	 * double the normal connect delay.
+	 */
+	if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
+		if (state == SSAM_HUB_CONNECTED)
+			schedule_delayed_work(&hub->update_work, hub->connect_delay);
+
+		state = SSAM_HUB_DISCONNECTED;
+	}
+
+	if (hub->state == state)
+		return;
+	hub->state = state;
+
+	if (hub->state == SSAM_HUB_CONNECTED)
+		status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
+	else
+		ssam_remove_clients(&hub->sdev->dev);
+
+	if (status)
+		dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
+}
+
+static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (is_ssam_device(dev))
+		ssam_device_mark_hot_removed(sdev);
+
+	return 0;
+}
+
+static void ssam_hub_update(struct ssam_hub *hub, bool connected)
+{
+	unsigned long delay;
+
+	/* Mark devices as hot-removed before we remove any. */
+	if (!connected) {
+		set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
+		device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
+	}
+
+	/*
+	 * Delay update when the base/keyboard cover is being connected to give
+	 * devices/EC some time to set up.
+	 */
+	delay = connected ? hub->connect_delay : 0;
+
+	schedule_delayed_work(&hub->update_work, delay);
+}
+
+static int __maybe_unused ssam_hub_resume(struct device *dev)
+{
+	struct ssam_hub *hub = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
+
+static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub)
+{
+	int status;
+
+	hub->sdev = sdev;
+	hub->state = SSAM_HUB_UNINITIALIZED;
+
+	INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
+
+	ssam_device_set_drvdata(sdev, hub);
+
+	status = ssam_device_notifier_register(sdev, &hub->notif);
+	if (status)
+		return status;
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+
+static void ssam_hub_remove(struct ssam_device *sdev)
+{
+	struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
+
+	ssam_device_notifier_unregister(sdev, &hub->notif);
+	cancel_delayed_work_sync(&hub->update_work);
+	ssam_remove_clients(&sdev->dev);
+}
+
+
+/* -- SSAM base-hub driver. ------------------------------------------------- */
+
+/*
+ * Some devices (especially battery) may need a bit of time to be fully usable
+ * after being (re-)connected. This delay has been determined via
+ * experimentation.
+ */
+#define SSAM_BASE_UPDATE_CONNECT_DELAY		msecs_to_jiffies(2500)
+
 SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
 	.target_category = SSAM_SSH_TC_BAS,
 	.target_id       = 0x01,
@@ -342,7 +471,7 @@ SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
 #define SSAM_BAS_OPMODE_TABLET		0x00
 #define SSAM_EVENT_BAS_CID_CONNECTION	0x0c
 
-static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_hub_state *state)
+static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
 {
 	u8 opmode;
 	int status;
@@ -354,62 +483,16 @@ static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_h
 	}
 
 	if (opmode != SSAM_BAS_OPMODE_TABLET)
-		*state = SSAM_BASE_HUB_CONNECTED;
+		*state = SSAM_HUB_CONNECTED;
 	else
-		*state = SSAM_BASE_HUB_DISCONNECTED;
+		*state = SSAM_HUB_DISCONNECTED;
 
 	return 0;
 }
 
-static ssize_t ssam_base_hub_state_show(struct device *dev, struct device_attribute *attr,
-					char *buf)
-{
-	struct ssam_base_hub *hub = dev_get_drvdata(dev);
-	bool connected = hub->state == SSAM_BASE_HUB_CONNECTED;
-
-	return sysfs_emit(buf, "%d\n", connected);
-}
-
-static struct device_attribute ssam_base_hub_attr_state =
-	__ATTR(state, 0444, ssam_base_hub_state_show, NULL);
-
-static struct attribute *ssam_base_hub_attrs[] = {
-	&ssam_base_hub_attr_state.attr,
-	NULL,
-};
-
-static const struct attribute_group ssam_base_hub_group = {
-	.attrs = ssam_base_hub_attrs,
-};
-
-static void ssam_base_hub_update_workfn(struct work_struct *work)
-{
-	struct ssam_base_hub *hub = container_of(work, struct ssam_base_hub, update_work.work);
-	struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
-	enum ssam_base_hub_state state;
-	int status = 0;
-
-	status = ssam_base_hub_query_state(hub, &state);
-	if (status)
-		return;
-
-	if (hub->state == state)
-		return;
-	hub->state = state;
-
-	if (hub->state == SSAM_BASE_HUB_CONNECTED)
-		status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
-	else
-		ssam_remove_clients(&hub->sdev->dev);
-
-	if (status)
-		dev_err(&hub->sdev->dev, "failed to update base-hub devices: %d\n", status);
-}
-
 static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
 {
-	struct ssam_base_hub *hub = container_of(nf, struct ssam_base_hub, notif);
-	unsigned long delay;
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
 
 	if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
 		return 0;
@@ -419,13 +502,7 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam
 		return 0;
 	}
 
-	/*
-	 * Delay update when the base is being connected to give devices/EC
-	 * some time to set up.
-	 */
-	delay = event->data[0] ? SSAM_BASE_UPDATE_CONNECT_DELAY : 0;
-
-	schedule_delayed_work(&hub->update_work, delay);
+	ssam_hub_update(hub, event->data[0]);
 
 	/*
 	 * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
@@ -435,27 +512,14 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam
 	return 0;
 }
 
-static int __maybe_unused ssam_base_hub_resume(struct device *dev)
-{
-	struct ssam_base_hub *hub = dev_get_drvdata(dev);
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
-}
-static SIMPLE_DEV_PM_OPS(ssam_base_hub_pm_ops, NULL, ssam_base_hub_resume);
-
 static int ssam_base_hub_probe(struct ssam_device *sdev)
 {
-	struct ssam_base_hub *hub;
-	int status;
+	struct ssam_hub *hub;
 
 	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
 	if (!hub)
 		return -ENOMEM;
 
-	hub->sdev = sdev;
-	hub->state = SSAM_BASE_HUB_UNINITIALIZED;
-
 	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
 	hub->notif.base.fn = ssam_base_hub_notif;
 	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
@@ -464,37 +528,10 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 	hub->notif.event.mask = SSAM_EVENT_MASK_NONE;
 	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
 
-	INIT_DELAYED_WORK(&hub->update_work, ssam_base_hub_update_workfn);
-
-	ssam_device_set_drvdata(sdev, hub);
-
-	status = ssam_device_notifier_register(sdev, &hub->notif);
-	if (status)
-		return status;
-
-	status = sysfs_create_group(&sdev->dev.kobj, &ssam_base_hub_group);
-	if (status)
-		goto err;
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
+	hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY;
+	hub->get_state = ssam_base_hub_query_state;
 
-err:
-	ssam_device_notifier_unregister(sdev, &hub->notif);
-	cancel_delayed_work_sync(&hub->update_work);
-	ssam_remove_clients(&sdev->dev);
-	return status;
-}
-
-static void ssam_base_hub_remove(struct ssam_device *sdev)
-{
-	struct ssam_base_hub *hub = ssam_device_get_drvdata(sdev);
-
-	sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group);
-
-	ssam_device_notifier_unregister(sdev, &hub->notif);
-	cancel_delayed_work_sync(&hub->update_work);
-	ssam_remove_clients(&sdev->dev);
+	return ssam_hub_setup(sdev, hub);
 }
 
 static const struct ssam_device_id ssam_base_hub_match[] = {
@@ -504,12 +541,12 @@ static const struct ssam_device_id ssam_base_hub_match[] = {
 
 static struct ssam_device_driver ssam_base_hub_driver = {
 	.probe = ssam_base_hub_probe,
-	.remove = ssam_base_hub_remove,
+	.remove = ssam_hub_remove,
 	.match_table = ssam_base_hub_match,
 	.driver = {
 		.name = "surface_aggregator_base_hub",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-		.pm = &ssam_base_hub_pm_ops,
+		.pm = &ssam_hub_pm_ops,
 	},
 };
 
-- 
2.36.1

From 974e92e633c22cbf9bcdc4e0669ee5464bfd602e Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Fri, 29 Apr 2022 23:02:06 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add KIP device hub

Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.

The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.

The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 103 +++++++++++++++++-
 1 file changed, 101 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 09cbeee2428b..1e60435c7cce 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -551,6 +551,93 @@ static struct ssam_device_driver ssam_base_hub_driver = {
 };
 
 
+/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
+
+/*
+ * Some devices may need a bit of time to be fully usable after being
+ * (re-)connected. This delay has been determined via experimentation.
+ */
+#define SSAM_KIP_UPDATE_CONNECT_DELAY		msecs_to_jiffies(250)
+
+#define SSAM_EVENT_KIP_CID_CONNECTION		0x2c
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, {
+	.target_category = SSAM_SSH_TC_KIP,
+	.target_id       = 0x01,
+	.command_id      = 0x2c,
+	.instance_id     = 0x00,
+});
+
+static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+	int status;
+	u8 connected;
+
+	status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected);
+	if (status < 0) {
+		dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
+		return status;
+	}
+
+	*state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
+	return 0;
+}
+
+static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+	if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
+		return 0;	/* Return "unhandled". */
+
+	if (event->length < 1) {
+		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+		return 0;
+	}
+
+	ssam_hub_update(hub, event->data[0]);
+	return SSAM_NOTIF_HANDLED;
+}
+
+static int ssam_kip_hub_probe(struct ssam_device *sdev)
+{
+	struct ssam_hub *hub;
+
+	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
+	hub->notif.base.fn = ssam_kip_hub_notif;
+	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
+	hub->notif.event.id.target_category = SSAM_SSH_TC_KIP,
+	hub->notif.event.id.instance = 0,
+	hub->notif.event.mask = SSAM_EVENT_MASK_TARGET;
+	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+	hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY;
+	hub->get_state = ssam_kip_get_connection_state;
+
+	return ssam_hub_setup(sdev, hub);
+}
+
+static const struct ssam_device_id ssam_kip_hub_match[] = {
+	{ SSAM_SDEV(KIP, 0x01, 0x00, 0x00) },
+	{ },
+};
+
+static struct ssam_device_driver ssam_kip_hub_driver = {
+	.probe = ssam_kip_hub_probe,
+	.remove = ssam_hub_remove,
+	.match_table = ssam_kip_hub_match,
+	.driver = {
+		.name = "surface_kip_hub",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm = &ssam_hub_pm_ops,
+	},
+};
+
+
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
 static const struct acpi_device_id ssam_platform_hub_match[] = {
@@ -673,18 +760,30 @@ static int __init ssam_device_hub_init(void)
 
 	status = platform_driver_register(&ssam_platform_hub_driver);
 	if (status)
-		return status;
+		goto err_platform;
 
 	status = ssam_device_driver_register(&ssam_base_hub_driver);
 	if (status)
-		platform_driver_unregister(&ssam_platform_hub_driver);
+		goto err_base;
+
+	status = ssam_device_driver_register(&ssam_kip_hub_driver);
+	if (status)
+		goto err_kip;
 
+	return 0;
+
+err_kip:
+	ssam_device_driver_unregister(&ssam_base_hub_driver);
+err_base:
+	platform_driver_unregister(&ssam_platform_hub_driver);
+err_platform:
 	return status;
 }
 module_init(ssam_device_hub_init);
 
 static void __exit ssam_device_hub_exit(void)
 {
+	ssam_device_driver_unregister(&ssam_kip_hub_driver);
 	ssam_device_driver_unregister(&ssam_base_hub_driver);
 	platform_driver_unregister(&ssam_platform_hub_driver);
 }
-- 
2.36.1

From b2163fb7f8188fd153f72b6fc83e94eba6c2fb2f Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Wed, 27 Oct 2021 22:33:03 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add support for
 keyboard cover on Surface Pro 8

Add support for the detachable keyboard cover on the Surface Pro 8.

The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers
of earlier Surface Pro generations, handled via the Surface System
Aggregator Module (SSAM). The keyboard and touchpad (as well as other
HID input devices) of this cover are standard SSAM HID client devices
(just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4),
however, some care needs to be taken as they can be physically detached
(similarly to the Surface Book 3). Specifically, the respective SSAM
client devices need to be removed when the keyboard cover has been
detached and (re-)initialized when the keyboard cover has been
(re-)attached.

On the Surface Pro 8, detachment of the keyboard cover (and by extension
its devices) is managed via the KIP subsystem. Therefore, said devices
need to be registered under the KIP device hub, which in turn will
remove and re-create/re-initialize those devices as needed.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 .../surface/surface_aggregator_registry.c     | 37 ++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 1e60435c7cce..ab69669316bd 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -47,6 +47,12 @@ static const struct software_node ssam_node_hub_base = {
 	.parent = &ssam_node_root,
 };
 
+/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */
+static const struct software_node ssam_node_hub_kip = {
+	.name = "ssam:01:0e:01:00:00",
+	.parent = &ssam_node_root,
+};
+
 /* AC adapter. */
 static const struct software_node ssam_node_bat_ac = {
 	.name = "ssam:01:02:01:01:01",
@@ -155,6 +161,30 @@ static const struct software_node ssam_node_hid_base_iid6 = {
 	.parent = &ssam_node_hub_base,
 };
 
+/* HID keyboard (KIP hub). */
+static const struct software_node ssam_node_hid_kip_keyboard = {
+	.name = "ssam:01:15:02:01:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID pen stash (KIP hub; pen taken / stashed away evens). */
+static const struct software_node ssam_node_hid_kip_penstash = {
+	.name = "ssam:01:15:02:02:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID touchpad (KIP hub). */
+static const struct software_node ssam_node_hid_kip_touchpad = {
+	.name = "ssam:01:15:02:03:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID device instance 5 (KIP hub, unknown HID device). */
+static const struct software_node ssam_node_hid_kip_iid5 = {
+	.name = "ssam:01:15:02:05:00",
+	.parent = &ssam_node_hub_kip,
+};
+
 /*
  * Devices for 5th- and 6th-generations models:
  * - Surface Book 2,
@@ -230,10 +260,15 @@ static const struct software_node *ssam_node_group_sp7[] = {
 
 static const struct software_node *ssam_node_group_sp8[] = {
 	&ssam_node_root,
+	&ssam_node_hub_kip,
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
 	&ssam_node_tmp_pprof,
-	/* TODO: Add support for keyboard cover. */
+	&ssam_node_hid_kip_keyboard,
+	&ssam_node_hid_kip_penstash,
+	&ssam_node_hid_kip_touchpad,
+	&ssam_node_hid_kip_iid5,
+	/* TODO: Add support for tablet mode switch. */
 	NULL,
 };
 
-- 
2.36.1

From 61fae5943305a2f16d74f813c2e4648585ded62b Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Tue, 8 Jun 2021 03:19:20 +0200
Subject: [PATCH] platform/surface: Add KIP tablet-mode switch

Add a driver providing a tablet-mode switch input device for Surface
models using the KIP subsystem to manage detachable peripherals.

The Surface Pro 8 has a detachable keyboard cover. Unlike the keyboard
covers of previous generation Surface Pro models, this cover is fully
handled by the Surface System Aggregator Module (SSAM). The SSAM KIP
subsystem (full name unknown, abbreviation found through reverse
engineering) provides notifications for mode changes of the cover.
Specifically, it allows us to know when the cover has been folded back,
detached, or whether it is in laptop mode.

The driver introduced with this change captures these events and
translates them to standard SW_TABLET_MODE input events.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 MAINTAINERS                                   |   6 +
 drivers/platform/surface/Kconfig              |  22 ++
 drivers/platform/surface/Makefile             |   1 +
 .../surface/surface_kip_tablet_switch.c       | 245 ++++++++++++++++++
 4 files changed, 274 insertions(+)
 create mode 100644 drivers/platform/surface/surface_kip_tablet_switch.c

diff --git a/MAINTAINERS b/MAINTAINERS
index f468864fd268..38f7f19002ac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13079,6 +13079,12 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/surface/surface_hotplug.c
 
+MICROSOFT SURFACE KIP TABLET-MODE SWITCH
+M:	Maximilian Luz <luzmaximilian@gmail.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/surface/surface_kip_tablet_switch.c
+
 MICROSOFT SURFACE PLATFORM PROFILE DRIVER
 M:	Maximilian Luz <luzmaximilian@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index eb79fbed8059..738d416ca4b2 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -149,6 +149,28 @@ config SURFACE_HOTPLUG
 	  Select M or Y here, if you want to (fully) support hot-plugging of
 	  dGPU devices on the Surface Book 2 and/or 3 during D3cold.
 
+config SURFACE_KIP_TABLET_SWITCH
+	tristate "Surface KIP Tablet-Mode Switch Driver"
+	depends on SURFACE_AGGREGATOR
+	depends on SURFACE_AGGREGATOR_BUS
+	depends on INPUT
+	help
+	  Provides a tablet-mode switch input device on Microsoft Surface models
+	  using the KIP subsystem for detachable keyboards (e.g. keyboard
+	  covers).
+
+	  The KIP subsystem is used on newer Surface generations to handle
+	  detachable input peripherals, specifically the keyboard cover
+	  (containing keyboard and touchpad) on the Surface Pro 8. This module
+	  provides a driver to let user-space know when the device should be
+	  considered in tablet-mode due to the keyboard cover being detached or
+	  folded back (essentially signaling when the keyboard is not available
+	  for input). It does so by creating a tablet-mode switch input device,
+	  sending the standard SW_TABLET_MODE event on mode change.
+
+	  Select M or Y here, if you want to provide tablet-mode switch input
+	  events on the Surface Pro 8.
+
 config SURFACE_PLATFORM_PROFILE
 	tristate "Surface Platform Profile Driver"
 	depends on ACPI
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index 0fc9cd3e4dd9..e173a95f2e8d 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -13,5 +13,6 @@ obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o
 obj-$(CONFIG_SURFACE_DTX)		+= surface_dtx.o
 obj-$(CONFIG_SURFACE_GPE)		+= surface_gpe.o
 obj-$(CONFIG_SURFACE_HOTPLUG)		+= surface_hotplug.o
+obj-$(CONFIG_SURFACE_KIP_TABLET_SWITCH)	+= surface_kip_tablet_switch.o
 obj-$(CONFIG_SURFACE_PLATFORM_PROFILE)	+= surface_platform_profile.o
 obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
diff --git a/drivers/platform/surface/surface_kip_tablet_switch.c b/drivers/platform/surface/surface_kip_tablet_switch.c
new file mode 100644
index 000000000000..27371da71ef2
--- /dev/null
+++ b/drivers/platform/surface/surface_kip_tablet_switch.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface System Aggregator Module (SSAM) tablet mode switch via KIP
+ * subsystem.
+ *
+ * Copyright (C) 2022 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+#define SSAM_EVENT_KIP_CID_LID_STATE		0x1d
+
+enum ssam_kip_lid_state {
+	SSAM_KIP_LID_STATE_DISCONNECTED   = 0x01,
+	SSAM_KIP_LID_STATE_CLOSED         = 0x02,
+	SSAM_KIP_LID_STATE_LAPTOP         = 0x03,
+	SSAM_KIP_LID_STATE_FOLDED_CANVAS  = 0x04,
+	SSAM_KIP_LID_STATE_FOLDED_BACK    = 0x05,
+};
+
+struct ssam_kip_sw {
+	struct ssam_device *sdev;
+
+	enum ssam_kip_lid_state state;
+	struct work_struct update_work;
+	struct input_dev *mode_switch;
+
+	struct ssam_event_notifier notif;
+};
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_lid_state, u8, {
+	.target_category = SSAM_SSH_TC_KIP,
+	.target_id       = 0x01,
+	.command_id      = 0x1d,
+	.instance_id     = 0x00,
+});
+
+static int ssam_kip_get_lid_state(struct ssam_kip_sw *sw, enum ssam_kip_lid_state *state)
+{
+	int status;
+	u8 raw;
+
+	status = ssam_retry(__ssam_kip_get_lid_state, sw->sdev->ctrl, &raw);
+	if (status < 0) {
+		dev_err(&sw->sdev->dev, "failed to query KIP lid state: %d\n", status);
+		return status;
+	}
+
+	*state = raw;
+	return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct ssam_kip_sw *sw = dev_get_drvdata(dev);
+	const char *state;
+
+	switch (sw->state) {
+	case SSAM_KIP_LID_STATE_DISCONNECTED:
+		state = "disconnected";
+		break;
+
+	case SSAM_KIP_LID_STATE_CLOSED:
+		state = "closed";
+		break;
+
+	case SSAM_KIP_LID_STATE_LAPTOP:
+		state = "laptop";
+		break;
+
+	case SSAM_KIP_LID_STATE_FOLDED_CANVAS:
+		state = "folded-canvas";
+		break;
+
+	case SSAM_KIP_LID_STATE_FOLDED_BACK:
+		state = "folded-back";
+		break;
+
+	default:
+		state = "<unknown>";
+		dev_warn(dev, "unknown KIP lid state: %d\n", sw->state);
+		break;
+	}
+
+	return sysfs_emit(buf, "%s\n", state);
+}
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *ssam_kip_sw_attrs[] = {
+	&dev_attr_state.attr,
+	NULL,
+};
+
+static const struct attribute_group ssam_kip_sw_group = {
+	.attrs = ssam_kip_sw_attrs,
+};
+
+static void ssam_kip_sw_update_workfn(struct work_struct *work)
+{
+	struct ssam_kip_sw *sw = container_of(work, struct ssam_kip_sw, update_work);
+	enum ssam_kip_lid_state state;
+	int tablet, status;
+
+	status = ssam_kip_get_lid_state(sw, &state);
+	if (status)
+		return;
+
+	if (sw->state == state)
+		return;
+	sw->state = state;
+
+	/* Send SW_TABLET_MODE event. */
+	tablet = state != SSAM_KIP_LID_STATE_LAPTOP;
+	input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet);
+	input_sync(sw->mode_switch);
+}
+
+static u32 ssam_kip_sw_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct ssam_kip_sw *sw = container_of(nf, struct ssam_kip_sw, notif);
+
+	if (event->command_id != SSAM_EVENT_KIP_CID_LID_STATE)
+		return 0;	/* Return "unhandled". */
+
+	if (event->length < 1) {
+		dev_err(&sw->sdev->dev, "unexpected payload size: %u\n", event->length);
+		return 0;
+	}
+
+	schedule_work(&sw->update_work);
+	return SSAM_NOTIF_HANDLED;
+}
+
+static int __maybe_unused ssam_kip_sw_resume(struct device *dev)
+{
+	struct ssam_kip_sw *sw = dev_get_drvdata(dev);
+
+	schedule_work(&sw->update_work);
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_kip_sw_pm_ops, NULL, ssam_kip_sw_resume);
+
+static int ssam_kip_sw_probe(struct ssam_device *sdev)
+{
+	struct ssam_kip_sw *sw;
+	int tablet, status;
+
+	sw = devm_kzalloc(&sdev->dev, sizeof(*sw), GFP_KERNEL);
+	if (!sw)
+		return -ENOMEM;
+
+	sw->sdev = sdev;
+	INIT_WORK(&sw->update_work, ssam_kip_sw_update_workfn);
+
+	ssam_device_set_drvdata(sdev, sw);
+
+	/* Get initial state. */
+	status = ssam_kip_get_lid_state(sw, &sw->state);
+	if (status)
+		return status;
+
+	/* Set up tablet mode switch. */
+	sw->mode_switch = devm_input_allocate_device(&sdev->dev);
+	if (!sw->mode_switch)
+		return -ENOMEM;
+
+	sw->mode_switch->name = "Microsoft Surface KIP Tablet Mode Switch";
+	sw->mode_switch->phys = "ssam/01:0e:01:00:01/input0";
+	sw->mode_switch->id.bustype = BUS_HOST;
+	sw->mode_switch->dev.parent = &sdev->dev;
+
+	tablet = sw->state != SSAM_KIP_LID_STATE_LAPTOP;
+	input_set_capability(sw->mode_switch, EV_SW, SW_TABLET_MODE);
+	input_report_switch(sw->mode_switch, SW_TABLET_MODE, tablet);
+
+	status = input_register_device(sw->mode_switch);
+	if (status)
+		return status;
+
+	/* Set up notifier. */
+	sw->notif.base.priority = 0;
+	sw->notif.base.fn = ssam_kip_sw_notif;
+	sw->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
+	sw->notif.event.id.target_category = SSAM_SSH_TC_KIP,
+	sw->notif.event.id.instance = 0,
+	sw->notif.event.mask = SSAM_EVENT_MASK_TARGET;
+	sw->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+	status = ssam_device_notifier_register(sdev, &sw->notif);
+	if (status)
+		return status;
+
+	status = sysfs_create_group(&sdev->dev.kobj, &ssam_kip_sw_group);
+	if (status)
+		goto err;
+
+	/* We might have missed events during setup, so check again. */
+	schedule_work(&sw->update_work);
+	return 0;
+
+err:
+	ssam_device_notifier_unregister(sdev, &sw->notif);
+	cancel_work_sync(&sw->update_work);
+	return status;
+}
+
+static void ssam_kip_sw_remove(struct ssam_device *sdev)
+{
+	struct ssam_kip_sw *sw = ssam_device_get_drvdata(sdev);
+
+	sysfs_remove_group(&sdev->dev.kobj, &ssam_kip_sw_group);
+
+	ssam_device_notifier_unregister(sdev, &sw->notif);
+	cancel_work_sync(&sw->update_work);
+}
+
+static const struct ssam_device_id ssam_kip_sw_match[] = {
+	{ SSAM_SDEV(KIP, 0x01, 0x00, 0x01) },
+	{ },
+};
+MODULE_DEVICE_TABLE(ssam, ssam_kip_sw_match);
+
+static struct ssam_device_driver ssam_kip_sw_driver = {
+	.probe = ssam_kip_sw_probe,
+	.remove = ssam_kip_sw_remove,
+	.match_table = ssam_kip_sw_match,
+	.driver = {
+		.name = "surface_kip_tablet_mode_switch",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm = &ssam_kip_sw_pm_ops,
+	},
+};
+module_ssam_device_driver(ssam_kip_sw_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Tablet mode switch driver for Surface devices using KIP subsystem");
+MODULE_LICENSE("GPL");
-- 
2.36.1

From c52bb8c58a61e3c4842efe6c325f0f659f39996a Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Wed, 27 Oct 2021 22:33:03 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add support for tablet
 mode switch on Surface Pro 8

Add a KIP subsystem tablet-mode switch device for the Surface Pro 8.
The respective driver for this device provides SW_TABLET_MODE input
events for user-space based on the state of the keyboard cover (e.g.
detached, folded-back, normal/laptop mode).

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_registry.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index ab69669316bd..c666392d4a9a 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -77,6 +77,12 @@ static const struct software_node ssam_node_tmp_pprof = {
 	.parent = &ssam_node_root,
 };
 
+/* Tablet-mode switch via KIP subsystem. */
+static const struct software_node ssam_node_kip_tablet_switch = {
+	.name = "ssam:01:0e:01:00:01",
+	.parent = &ssam_node_root,
+};
+
 /* DTX / detachment-system device (Surface Book 3). */
 static const struct software_node ssam_node_bas_dtx = {
 	.name = "ssam:01:11:01:00:00",
@@ -264,11 +270,11 @@ static const struct software_node *ssam_node_group_sp8[] = {
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
 	&ssam_node_tmp_pprof,
+	&ssam_node_kip_tablet_switch,
 	&ssam_node_hid_kip_keyboard,
 	&ssam_node_hid_kip_penstash,
 	&ssam_node_hid_kip_touchpad,
 	&ssam_node_hid_kip_iid5,
-	/* TODO: Add support for tablet mode switch. */
 	NULL,
 };
 
-- 
2.36.1

From 615cedaf5078fb23d8d6330843a5989ffb3b5aa7 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 21 May 2022 00:30:46 +0200
Subject: [PATCH] platform/surface: aggregator: Move device registry helper
 function to core module

Move helper functions for client device registration to the core module.
This simplifies addition of future DT/OF support and also allows us to
split out the device hub drivers into their own module.

At the same time, also improve device node validation a bit by not
silently skipping devices with invalid device UID specifiers.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/aggregator/bus.c     | 176 ++++++++++++++++--
 .../surface/surface_aggregator_registry.c     |  75 +-------
 include/linux/surface_aggregator/device.h     |  37 ++++
 3 files changed, 199 insertions(+), 89 deletions(-)

diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
index abbbb5b08b07..4bba60884bb5 100644
--- a/drivers/platform/surface/aggregator/bus.c
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 #include <linux/surface_aggregator/controller.h>
@@ -14,6 +15,9 @@
 #include "bus.h"
 #include "controller.h"
 
+
+/* -- Device and bus functions. --------------------------------------------- */
+
 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
@@ -363,6 +367,162 @@ void ssam_device_driver_unregister(struct ssam_device_driver *sdrv)
 }
 EXPORT_SYMBOL_GPL(ssam_device_driver_unregister);
 
+
+/* -- Bus registration. ----------------------------------------------------- */
+
+/**
+ * ssam_bus_register() - Register and set-up the SSAM client device bus.
+ */
+int ssam_bus_register(void)
+{
+	return bus_register(&ssam_bus_type);
+}
+
+/**
+ * ssam_bus_unregister() - Unregister the SSAM client device bus.
+ */
+void ssam_bus_unregister(void)
+{
+	return bus_unregister(&ssam_bus_type);
+}
+
+
+/* -- Helpers for controller and hub devices. ------------------------------- */
+
+static int ssam_device_uid_from_string(const char *str, struct ssam_device_uid *uid)
+{
+	u8 d, tc, tid, iid, fn;
+	int n;
+
+	n = sscanf(str, "%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn);
+	if (n != 5)
+		return -EINVAL;
+
+	uid->domain = d;
+	uid->category = tc;
+	uid->target = tid;
+	uid->instance = iid;
+	uid->function = fn;
+
+	return 0;
+}
+
+static int ssam_get_uid_for_node(struct fwnode_handle *node, struct ssam_device_uid *uid)
+{
+	const char* str = fwnode_get_name(node);
+
+	/*
+	 * To simplify definitions of firmware nodes, we set the device name
+	 * based on the UID of the device, prefixed with "ssam:".
+	 */
+	if (strncmp(str, "ssam:", strlen("ssam:")) != 0)
+		return -ENODEV;
+
+	str += strlen("ssam:");
+	return ssam_device_uid_from_string(str, uid);
+}
+
+static int ssam_add_client_device(struct device *parent, struct ssam_controller *ctrl,
+				  struct fwnode_handle *node)
+{
+	struct ssam_device_uid uid;
+	struct ssam_device *sdev;
+	int status;
+
+	status = ssam_get_uid_for_node(node, &uid);
+	if (status)
+		return status;
+
+	sdev = ssam_device_alloc(ctrl, uid);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->dev.parent = parent;
+	sdev->dev.fwnode = node;
+
+	status = ssam_device_add(sdev);
+	if (status)
+		ssam_device_put(sdev);
+
+	return status;
+}
+
+/**
+ * __ssam_register_clients() - Register client devices defined under the
+ * given firmware node as children of the given device.
+ * @parent: The parent device under which clients should be registered.
+ * @ctrl: The controller with which client should be registered.
+ * @node: The firmware node holding definitions of the devices to be added.
+ *
+ * Register all clients that have been defined as children of the given root
+ * firmware node as children of the given parent device. The respective child
+ * firmware nodes will be associated with the correspondingly created child
+ * devices.
+ *
+ * The given controller will be used to instantiate the new devices. See
+ * ssam_device_add() for details.
+ *
+ * Note that, generally, the use of either ssam_device_register_clients() or
+ * ssam_register_clients() should be preferred as they directly use the
+ * firmware node and/or controller associated with the given device. This
+ * function is only intended for use when different device specifications (e.g.
+ * ACPI and firmware nodes) need to be combined (as is done in the platform hub
+ * of the device registry).
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+			    struct fwnode_handle *node)
+{
+	struct fwnode_handle *child;
+	int status;
+
+	fwnode_for_each_child_node(node, child) {
+		/*
+		 * Try to add the device specified in the firmware node. If
+		 * this fails with -ENODEV, the node does not specify any SSAM
+		 * device, so ignore it and continue with the next one.
+		 */
+		status = ssam_add_client_device(parent, ctrl, child);
+		if (status && status != -ENODEV)
+			goto err;
+	}
+
+	return 0;
+err:
+	ssam_remove_clients(parent);
+	return status;
+}
+EXPORT_SYMBOL_GPL(__ssam_register_clients);
+
+/**
+ * ssam_register_clients() - Register all client devices defined under the
+ * given parent device.
+ * @dev: The parent device under which clients should be registered.
+ * @ctrl: The controller with which client should be registered.
+ *
+ * Register all clients that have via firmware nodes been defined as children
+ * of the given (parent) device. The respective child firmware nodes will be
+ * associated with the correspondingly created child devices.
+ *
+ * The given controller will be used to instantiate the new devices. See
+ * ssam_device_add() for details.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl)
+{
+	struct fwnode_handle *node;
+	int status;
+
+	node = fwnode_handle_get(dev_fwnode(dev));
+	status = __ssam_register_clients(dev, ctrl, node);
+	fwnode_handle_put(node);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_register_clients);
+
 static int ssam_remove_device(struct device *dev, void *_data)
 {
 	struct ssam_device *sdev = to_ssam_device(dev);
@@ -387,19 +547,3 @@ void ssam_remove_clients(struct device *dev)
 	device_for_each_child_reverse(dev, NULL, ssam_remove_device);
 }
 EXPORT_SYMBOL_GPL(ssam_remove_clients);
-
-/**
- * ssam_bus_register() - Register and set-up the SSAM client device bus.
- */
-int ssam_bus_register(void)
-{
-	return bus_register(&ssam_bus_type);
-}
-
-/**
- * ssam_bus_unregister() - Unregister the SSAM client device bus.
- */
-void ssam_bus_unregister(void)
-{
-	return bus_unregister(&ssam_bus_type);
-}
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index c666392d4a9a..3261c8141841 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -279,76 +279,6 @@ static const struct software_node *ssam_node_group_sp8[] = {
 };
 
 
-/* -- Device registry helper functions. ------------------------------------- */
-
-static int ssam_uid_from_string(const char *str, struct ssam_device_uid *uid)
-{
-	u8 d, tc, tid, iid, fn;
-	int n;
-
-	n = sscanf(str, "ssam:%hhx:%hhx:%hhx:%hhx:%hhx", &d, &tc, &tid, &iid, &fn);
-	if (n != 5)
-		return -EINVAL;
-
-	uid->domain = d;
-	uid->category = tc;
-	uid->target = tid;
-	uid->instance = iid;
-	uid->function = fn;
-
-	return 0;
-}
-
-static int ssam_hub_add_device(struct device *parent, struct ssam_controller *ctrl,
-			       struct fwnode_handle *node)
-{
-	struct ssam_device_uid uid;
-	struct ssam_device *sdev;
-	int status;
-
-	status = ssam_uid_from_string(fwnode_get_name(node), &uid);
-	if (status)
-		return status;
-
-	sdev = ssam_device_alloc(ctrl, uid);
-	if (!sdev)
-		return -ENOMEM;
-
-	sdev->dev.parent = parent;
-	sdev->dev.fwnode = node;
-
-	status = ssam_device_add(sdev);
-	if (status)
-		ssam_device_put(sdev);
-
-	return status;
-}
-
-static int ssam_hub_register_clients(struct device *parent, struct ssam_controller *ctrl,
-				     struct fwnode_handle *node)
-{
-	struct fwnode_handle *child;
-	int status;
-
-	fwnode_for_each_child_node(node, child) {
-		/*
-		 * Try to add the device specified in the firmware node. If
-		 * this fails with -EINVAL, the node does not specify any SSAM
-		 * device, so ignore it and continue with the next one.
-		 */
-
-		status = ssam_hub_add_device(parent, ctrl, child);
-		if (status && status != -EINVAL)
-			goto err;
-	}
-
-	return 0;
-err:
-	ssam_remove_clients(parent);
-	return status;
-}
-
-
 /* -- SSAM generic subsystem hub driver framework. -------------------------- */
 
 enum ssam_hub_state {
@@ -378,7 +308,6 @@ struct ssam_hub {
 static void ssam_hub_update_workfn(struct work_struct *work)
 {
 	struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
-	struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
 	enum ssam_hub_state state;
 	int status = 0;
 
@@ -418,7 +347,7 @@ static void ssam_hub_update_workfn(struct work_struct *work)
 	hub->state = state;
 
 	if (hub->state == SSAM_HUB_CONNECTED)
-		status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
+		status = ssam_device_register_clients(hub->sdev);
 	else
 		ssam_remove_clients(&hub->sdev->dev);
 
@@ -762,7 +691,7 @@ static int ssam_platform_hub_probe(struct platform_device *pdev)
 
 	set_secondary_fwnode(&pdev->dev, root);
 
-	status = ssam_hub_register_clients(&pdev->dev, ctrl, root);
+	status = __ssam_register_clients(&pdev->dev, ctrl, root);
 	if (status) {
 		set_secondary_fwnode(&pdev->dev, NULL);
 		software_node_unregister_node_group(nodes);
diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index ad245c6b00d0..6ae110e830b4 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -364,11 +364,48 @@ void ssam_device_driver_unregister(struct ssam_device_driver *d);
 /* -- Helpers for controller and hub devices. ------------------------------- */
 
 #ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
+int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+			    struct fwnode_handle *node);
+int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl);
 void ssam_remove_clients(struct device *dev);
+
 #else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl,
+					  struct fwnode_handle *node)
+{
+	return 0;
+}
+
+static inline int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl)
+{
+	return 0;
+}
+
 static inline void ssam_remove_clients(struct device *dev) {}
+
 #endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
 
+/**
+ * ssam_device_register_clients() - Register all client devices defined under
+ * the given SSAM parent device.
+ * @sdev: The parent device under which clients should be registered.
+ *
+ * Register all clients that have via firmware nodes been defined as children
+ * of the given (parent) device. The respective child firmware nodes will be
+ * associated with the correspondingly created child devices.
+ *
+ * The controller used by the parent device will be used to instantiate the new
+ * devices. See ssam_device_add() for details.
+ *
+ * Return: Returns zero on success, nonzero on failure.
+ */
+static inline int ssam_device_register_clients(struct ssam_device *sdev)
+{
+	return ssam_register_clients(&sdev->dev, sdev->ctrl);
+}
+
 
 /* -- Helpers for client-device requests. ----------------------------------- */
 
-- 
2.36.1

From d8a038b9b64c1236478821d79d5b5049b012fba3 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 21 May 2022 00:39:56 +0200
Subject: [PATCH] platform/surface: aggregator: Move subsystem hub drivers to
 their own module

Split out subsystem device hub drivers into their own module. This
allows us to load the hub drivers separately from the registry, which
will help future DT/OF support.

While doing so, also remove a small bit of code duplication.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/Kconfig              |  35 +-
 drivers/platform/surface/Makefile             |   1 +
 .../platform/surface/surface_aggregator_hub.c | 363 +++++++++++++++++
 .../surface/surface_aggregator_registry.c     | 371 +-----------------
 4 files changed, 396 insertions(+), 374 deletions(-)
 create mode 100644 drivers/platform/surface/surface_aggregator_hub.c

diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index 738d416ca4b2..27780746936d 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -72,18 +72,45 @@ config SURFACE_AGGREGATOR_CDEV
 	  The provided interface is intended for debugging and development only,
 	  and should not be used otherwise.
 
+config SURFACE_AGGREGATOR_HUB
+	tristate "Surface System Aggregator Module Subsystem Device Hubs"
+	depends on SURFACE_AGGREGATOR
+	depends on SURFACE_AGGREGATOR_BUS
+	help
+	  Device-hub drivers for Surface System Aggregator Module (SSAM) subsystem
+	  devices.
+
+	  Provides subsystem hub drivers which manage client devices on various
+	  SSAM subsystems. In some subsystems, notably the BAS subsystem managing
+	  devices contained in the base of the Surface Book 3 and the KIP subsystem
+	  managing type-cover devices in the Surface Pro 8 and Surface Pro X,
+	  devices can be (hot-)removed. Hub devices and drivers are required to
+	  manage these subdevices.
+
+	  Devices managed via these hubs are:
+	  - Battery/AC devices (Surface Book 3).
+	  - HID input devices (7th-generation and later models with detachable
+	    input devices).
+
+	  Select M (recommended) or Y here if you want support for the above
+	  mentioned devices on the corresponding Surface models. Without this
+	  module, the respective devices mentioned above will not be instantiated
+	  and thus any functionality provided by them will be missing, even when
+	  drivers for these devices are present. This module only provides the
+	  respective subsystem hubs. Both drivers and device specification (e.g.
+	  via the Surface Aggregator Registry) for these devices still need to be
+	  selected via other options.
+
 config SURFACE_AGGREGATOR_REGISTRY
 	tristate "Surface System Aggregator Module Device Registry"
 	depends on SURFACE_AGGREGATOR
 	depends on SURFACE_AGGREGATOR_BUS
 	help
-	  Device-registry and device-hubs for Surface System Aggregator Module
-	  (SSAM) devices.
+	  Device-registry for Surface System Aggregator Module (SSAM) devices.
 
 	  Provides a module and driver which act as a device-registry for SSAM
 	  client devices that cannot be detected automatically, e.g. via ACPI.
-	  Such devices are instead provided via this registry and attached via
-	  device hubs, also provided in this module.
+	  Such devices are instead provided and managed via this registry.
 
 	  Devices provided via this registry are:
 	  - Platform profile (performance-/cooling-mode) device (5th- and later
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index e173a95f2e8d..73124b4fcd31 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_SURFACE_3_POWER_OPREGION)	+= surface3_power.o
 obj-$(CONFIG_SURFACE_ACPI_NOTIFY)	+= surface_acpi_notify.o
 obj-$(CONFIG_SURFACE_AGGREGATOR)	+= aggregator/
 obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV)	+= surface_aggregator_cdev.o
+obj-$(CONFIG_SURFACE_AGGREGATOR_HUB)	+= surface_aggregator_hub.o
 obj-$(CONFIG_SURFACE_AGGREGATOR_REGISTRY) += surface_aggregator_registry.o
 obj-$(CONFIG_SURFACE_DTX)		+= surface_dtx.o
 obj-$(CONFIG_SURFACE_GPE)		+= surface_gpe.o
diff --git a/drivers/platform/surface/surface_aggregator_hub.c b/drivers/platform/surface/surface_aggregator_hub.c
new file mode 100644
index 000000000000..20b1c38debfe
--- /dev/null
+++ b/drivers/platform/surface/surface_aggregator_hub.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Surface System Aggregator Module (SSAM) subsystem device hubs.
+ *
+ * Provides a driver for SSAM subsystems device hubs. This driver performs
+ * instantiation of the devices managed by said hubs and takes care of
+ * (hot-)removal.
+ *
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SSAM generic subsystem hub driver framework. -------------------------- */
+
+enum ssam_hub_state {
+	SSAM_HUB_UNINITIALIZED,		/* Only set during initialization. */
+	SSAM_HUB_CONNECTED,
+	SSAM_HUB_DISCONNECTED,
+};
+
+enum ssam_hub_flags {
+	SSAM_HUB_HOT_REMOVED,
+};
+
+struct ssam_hub {
+	struct ssam_device *sdev;
+
+	enum ssam_hub_state state;
+	unsigned long flags;
+
+	struct delayed_work update_work;
+	unsigned long connect_delay;
+
+	struct ssam_event_notifier notif;
+
+	int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
+};
+
+struct ssam_hub_info {
+	struct {
+		struct ssam_event_registry reg;
+		struct ssam_event_id id;
+		enum ssam_event_mask mask;
+		u8 flags;
+	} event;
+
+	u32 (*notify)(struct ssam_event_notifier *nf, const struct ssam_event *event);
+	int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
+
+	unsigned long connect_delay_ms;
+};
+
+static void ssam_hub_update_workfn(struct work_struct *work)
+{
+	struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
+	enum ssam_hub_state state;
+	int status = 0;
+
+	status = hub->get_state(hub, &state);
+	if (status)
+		return;
+
+	/*
+	 * There is a small possibility that hub devices were hot-removed and
+	 * re-added before we were able to remove them here. In that case, both
+	 * the state returned by get_state() and the state of the hub will
+	 * equal SSAM_HUB_CONNECTED and we would bail early below, which would
+	 * leave child devices without proper (re-)initialization and the
+	 * hot-remove flag set.
+	 *
+	 * Therefore, we check whether devices have been hot-removed via an
+	 * additional flag on the hub and, in this case, override the returned
+	 * hub state. In case of a missed disconnect (i.e. get_state returned
+	 * "connected"), we further need to re-schedule this work (with the
+	 * appropriate delay) as the actual connect work submission might have
+	 * been merged with this one.
+	 *
+	 * This then leads to one of two cases: Either we submit an unnecessary
+	 * work item (which will get ignored via either the queue or the state
+	 * checks) or, in the unlikely case that the work is actually required,
+	 * double the normal connect delay.
+	 */
+	if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
+		if (state == SSAM_HUB_CONNECTED)
+			schedule_delayed_work(&hub->update_work, hub->connect_delay);
+
+		state = SSAM_HUB_DISCONNECTED;
+	}
+
+	if (hub->state == state)
+		return;
+	hub->state = state;
+
+	if (hub->state == SSAM_HUB_CONNECTED)
+		status = ssam_device_register_clients(hub->sdev);
+	else
+		ssam_remove_clients(&hub->sdev->dev);
+
+	if (status)
+		dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
+}
+
+static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (is_ssam_device(dev))
+		ssam_device_mark_hot_removed(sdev);
+
+	return 0;
+}
+
+static void ssam_hub_update(struct ssam_hub *hub, bool connected)
+{
+	unsigned long delay;
+
+	/* Mark devices as hot-removed before we remove any. */
+	if (!connected) {
+		set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
+		device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
+	}
+
+	/*
+	 * Delay update when the base/keyboard cover is being connected to give
+	 * devices/EC some time to set up.
+	 */
+	delay = connected ? hub->connect_delay : 0;
+
+	schedule_delayed_work(&hub->update_work, delay);
+}
+
+static int __maybe_unused ssam_hub_resume(struct device *dev)
+{
+	struct ssam_hub *hub = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
+
+static int ssam_hub_probe(struct ssam_device *sdev)
+{
+	const struct ssam_hub_info *info;
+	struct ssam_hub *hub;
+	int status;
+
+	info = ssam_device_get_match_data(sdev);
+	if (!info) {
+		WARN(1, "no driver match data specified");
+		return -EINVAL;
+	}
+
+	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	hub->sdev = sdev;
+	hub->state = SSAM_HUB_UNINITIALIZED;
+
+	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
+	hub->notif.base.fn = info->notify;
+	hub->notif.event.reg = info->event.reg;
+	hub->notif.event.id = info->event.id;
+	hub->notif.event.mask = info->event.mask;
+	hub->notif.event.flags = info->event.flags;
+
+	hub->connect_delay = msecs_to_jiffies(info->connect_delay_ms);
+	hub->get_state = info->get_state;
+
+	INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
+
+	ssam_device_set_drvdata(sdev, hub);
+
+	status = ssam_device_notifier_register(sdev, &hub->notif);
+	if (status)
+		return status;
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+
+static void ssam_hub_remove(struct ssam_device *sdev)
+{
+	struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
+
+	ssam_device_notifier_unregister(sdev, &hub->notif);
+	cancel_delayed_work_sync(&hub->update_work);
+	ssam_remove_clients(&sdev->dev);
+}
+
+
+/* -- SSAM base-subsystem hub driver. --------------------------------------- */
+
+/*
+ * Some devices (especially battery) may need a bit of time to be fully usable
+ * after being (re-)connected. This delay has been determined via
+ * experimentation.
+ */
+#define SSAM_BASE_UPDATE_CONNECT_DELAY		2500
+
+SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
+	.target_category = SSAM_SSH_TC_BAS,
+	.target_id       = 0x01,
+	.command_id      = 0x0d,
+	.instance_id     = 0x00,
+});
+
+#define SSAM_BAS_OPMODE_TABLET		0x00
+#define SSAM_EVENT_BAS_CID_CONNECTION	0x0c
+
+static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+	u8 opmode;
+	int status;
+
+	status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode);
+	if (status < 0) {
+		dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status);
+		return status;
+	}
+
+	if (opmode != SSAM_BAS_OPMODE_TABLET)
+		*state = SSAM_HUB_CONNECTED;
+	else
+		*state = SSAM_HUB_DISCONNECTED;
+
+	return 0;
+}
+
+static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+	if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
+		return 0;
+
+	if (event->length < 1) {
+		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+		return 0;
+	}
+
+	ssam_hub_update(hub, event->data[0]);
+
+	/*
+	 * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
+	 * consumed by the detachment system driver. We're just a (more or less)
+	 * silent observer.
+	 */
+	return 0;
+}
+
+static const struct ssam_hub_info base_hub = {
+	.event = {
+		.reg = SSAM_EVENT_REGISTRY_SAM,
+		.id = {
+			.target_category = SSAM_SSH_TC_BAS,
+			.instance = 0,
+		},
+		.mask = SSAM_EVENT_MASK_NONE,
+		.flags = SSAM_EVENT_SEQUENCED,
+	},
+	.notify = ssam_base_hub_notif,
+	.get_state = ssam_base_hub_query_state,
+	.connect_delay_ms = SSAM_BASE_UPDATE_CONNECT_DELAY,
+};
+
+
+/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
+
+/*
+ * Some devices may need a bit of time to be fully usable after being
+ * (re-)connected. This delay has been determined via experimentation.
+ */
+#define SSAM_KIP_UPDATE_CONNECT_DELAY		250
+
+#define SSAM_EVENT_KIP_CID_CONNECTION		0x2c
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_query_state, u8, {
+	.target_category = SSAM_SSH_TC_KIP,
+	.target_id       = 0x01,
+	.command_id      = 0x2c,
+	.instance_id     = 0x00,
+});
+
+static int ssam_kip_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+	int status;
+	u8 connected;
+
+	status = ssam_retry(__ssam_kip_query_state, hub->sdev->ctrl, &connected);
+	if (status < 0) {
+		dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
+		return status;
+	}
+
+	*state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
+	return 0;
+}
+
+static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+	if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
+		return 0;	/* Return "unhandled". */
+
+	if (event->length < 1) {
+		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+		return 0;
+	}
+
+	ssam_hub_update(hub, event->data[0]);
+	return SSAM_NOTIF_HANDLED;
+}
+
+static const struct ssam_hub_info kip_hub = {
+	.event = {
+		.reg = SSAM_EVENT_REGISTRY_SAM,
+		.id = {
+			.target_category = SSAM_SSH_TC_KIP,
+			.instance = 0,
+		},
+		.mask = SSAM_EVENT_MASK_TARGET,
+		.flags = SSAM_EVENT_SEQUENCED,
+	},
+	.notify = ssam_kip_hub_notif,
+	.get_state = ssam_kip_hub_query_state,
+	.connect_delay_ms = SSAM_KIP_UPDATE_CONNECT_DELAY,
+};
+
+
+/* -- Driver registration. -------------------------------------------------- */
+
+static const struct ssam_device_id ssam_hub_match[] = {
+	{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00), (unsigned long)&base_hub },
+	{ SSAM_SDEV(KIP, 0x01, 0x00, 0x00),         (unsigned long)&kip_hub  },
+	{ }
+};
+MODULE_DEVICE_TABLE(ssam, ssam_hub_match);
+
+static struct ssam_device_driver ssam_subsystem_hub_driver = {
+	.probe = ssam_hub_probe,
+	.remove = ssam_hub_remove,
+	.match_table = ssam_hub_match,
+	.driver = {
+		.name = "surface_aggregator_subsystem_hub",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm = &ssam_hub_pm_ops,
+	},
+};
+module_ssam_device_driver(ssam_subsystem_hub_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Subsystem device hub driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 3261c8141841..11b51aa9ea73 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -11,14 +11,11 @@
 
 #include <linux/acpi.h>
 #include <linux/kernel.h>
-#include <linux/limits.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/types.h>
-#include <linux/workqueue.h>
 
-#include <linux/surface_aggregator/controller.h>
 #include <linux/surface_aggregator/device.h>
 
 
@@ -279,335 +276,6 @@ static const struct software_node *ssam_node_group_sp8[] = {
 };
 
 
-/* -- SSAM generic subsystem hub driver framework. -------------------------- */
-
-enum ssam_hub_state {
-	SSAM_HUB_UNINITIALIZED,		/* Only set during initialization. */
-	SSAM_HUB_CONNECTED,
-	SSAM_HUB_DISCONNECTED,
-};
-
-enum ssam_hub_flags {
-	SSAM_HUB_HOT_REMOVED,
-};
-
-struct ssam_hub {
-	struct ssam_device *sdev;
-
-	enum ssam_hub_state state;
-	unsigned long flags;
-
-	struct delayed_work update_work;
-	unsigned long connect_delay;
-
-	struct ssam_event_notifier notif;
-
-	int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
-};
-
-static void ssam_hub_update_workfn(struct work_struct *work)
-{
-	struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
-	enum ssam_hub_state state;
-	int status = 0;
-
-	status = hub->get_state(hub, &state);
-	if (status)
-		return;
-
-	/*
-	 * There is a small possibility that hub devices were hot-removed and
-	 * re-added before we were able to remove them here. In that case, both
-	 * the state returned by get_state() and the state of the hub will
-	 * equal SSAM_HUB_CONNECTED and we would bail early below, which would
-	 * leave child devices without proper (re-)initialization and the
-	 * hot-remove flag set.
-	 *
-	 * Therefore, we check whether devices have been hot-removed via an
-	 * additional flag on the hub and, in this case, override the returned
-	 * hub state. In case of a missed disconnect (i.e. get_state returned
-	 * "connected"), we further need to re-schedule this work (with the
-	 * appropriate delay) as the actual connect work submission might have
-	 * been merged with this one.
-	 *
-	 * This then leads to one of two cases: Either we submit an unnecessary
-	 * work item (which will get ignored via either the queue or the state
-	 * checks) or, in the unlikely case that the work is actually required,
-	 * double the normal connect delay.
-	 */
-	if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
-		if (state == SSAM_HUB_CONNECTED)
-			schedule_delayed_work(&hub->update_work, hub->connect_delay);
-
-		state = SSAM_HUB_DISCONNECTED;
-	}
-
-	if (hub->state == state)
-		return;
-	hub->state = state;
-
-	if (hub->state == SSAM_HUB_CONNECTED)
-		status = ssam_device_register_clients(hub->sdev);
-	else
-		ssam_remove_clients(&hub->sdev->dev);
-
-	if (status)
-		dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
-}
-
-static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
-{
-	struct ssam_device *sdev = to_ssam_device(dev);
-
-	if (is_ssam_device(dev))
-		ssam_device_mark_hot_removed(sdev);
-
-	return 0;
-}
-
-static void ssam_hub_update(struct ssam_hub *hub, bool connected)
-{
-	unsigned long delay;
-
-	/* Mark devices as hot-removed before we remove any. */
-	if (!connected) {
-		set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
-		device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
-	}
-
-	/*
-	 * Delay update when the base/keyboard cover is being connected to give
-	 * devices/EC some time to set up.
-	 */
-	delay = connected ? hub->connect_delay : 0;
-
-	schedule_delayed_work(&hub->update_work, delay);
-}
-
-static int __maybe_unused ssam_hub_resume(struct device *dev)
-{
-	struct ssam_hub *hub = dev_get_drvdata(dev);
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
-}
-static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
-
-static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub)
-{
-	int status;
-
-	hub->sdev = sdev;
-	hub->state = SSAM_HUB_UNINITIALIZED;
-
-	INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
-
-	ssam_device_set_drvdata(sdev, hub);
-
-	status = ssam_device_notifier_register(sdev, &hub->notif);
-	if (status)
-		return status;
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
-}
-
-static void ssam_hub_remove(struct ssam_device *sdev)
-{
-	struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
-
-	ssam_device_notifier_unregister(sdev, &hub->notif);
-	cancel_delayed_work_sync(&hub->update_work);
-	ssam_remove_clients(&sdev->dev);
-}
-
-
-/* -- SSAM base-hub driver. ------------------------------------------------- */
-
-/*
- * Some devices (especially battery) may need a bit of time to be fully usable
- * after being (re-)connected. This delay has been determined via
- * experimentation.
- */
-#define SSAM_BASE_UPDATE_CONNECT_DELAY		msecs_to_jiffies(2500)
-
-SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
-	.target_category = SSAM_SSH_TC_BAS,
-	.target_id       = 0x01,
-	.command_id      = 0x0d,
-	.instance_id     = 0x00,
-});
-
-#define SSAM_BAS_OPMODE_TABLET		0x00
-#define SSAM_EVENT_BAS_CID_CONNECTION	0x0c
-
-static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
-{
-	u8 opmode;
-	int status;
-
-	status = ssam_retry(ssam_bas_query_opmode, hub->sdev->ctrl, &opmode);
-	if (status < 0) {
-		dev_err(&hub->sdev->dev, "failed to query base state: %d\n", status);
-		return status;
-	}
-
-	if (opmode != SSAM_BAS_OPMODE_TABLET)
-		*state = SSAM_HUB_CONNECTED;
-	else
-		*state = SSAM_HUB_DISCONNECTED;
-
-	return 0;
-}
-
-static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
-{
-	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
-
-	if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
-		return 0;
-
-	if (event->length < 1) {
-		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
-		return 0;
-	}
-
-	ssam_hub_update(hub, event->data[0]);
-
-	/*
-	 * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
-	 * consumed by the detachment system driver. We're just a (more or less)
-	 * silent observer.
-	 */
-	return 0;
-}
-
-static int ssam_base_hub_probe(struct ssam_device *sdev)
-{
-	struct ssam_hub *hub;
-
-	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
-	if (!hub)
-		return -ENOMEM;
-
-	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
-	hub->notif.base.fn = ssam_base_hub_notif;
-	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
-	hub->notif.event.id.target_category = SSAM_SSH_TC_BAS,
-	hub->notif.event.id.instance = 0,
-	hub->notif.event.mask = SSAM_EVENT_MASK_NONE;
-	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
-
-	hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY;
-	hub->get_state = ssam_base_hub_query_state;
-
-	return ssam_hub_setup(sdev, hub);
-}
-
-static const struct ssam_device_id ssam_base_hub_match[] = {
-	{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
-	{ },
-};
-
-static struct ssam_device_driver ssam_base_hub_driver = {
-	.probe = ssam_base_hub_probe,
-	.remove = ssam_hub_remove,
-	.match_table = ssam_base_hub_match,
-	.driver = {
-		.name = "surface_aggregator_base_hub",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-		.pm = &ssam_hub_pm_ops,
-	},
-};
-
-
-/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
-
-/*
- * Some devices may need a bit of time to be fully usable after being
- * (re-)connected. This delay has been determined via experimentation.
- */
-#define SSAM_KIP_UPDATE_CONNECT_DELAY		msecs_to_jiffies(250)
-
-#define SSAM_EVENT_KIP_CID_CONNECTION		0x2c
-
-SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, {
-	.target_category = SSAM_SSH_TC_KIP,
-	.target_id       = 0x01,
-	.command_id      = 0x2c,
-	.instance_id     = 0x00,
-});
-
-static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state)
-{
-	int status;
-	u8 connected;
-
-	status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected);
-	if (status < 0) {
-		dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
-		return status;
-	}
-
-	*state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
-	return 0;
-}
-
-static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
-{
-	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
-
-	if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
-		return 0;	/* Return "unhandled". */
-
-	if (event->length < 1) {
-		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
-		return 0;
-	}
-
-	ssam_hub_update(hub, event->data[0]);
-	return SSAM_NOTIF_HANDLED;
-}
-
-static int ssam_kip_hub_probe(struct ssam_device *sdev)
-{
-	struct ssam_hub *hub;
-
-	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
-	if (!hub)
-		return -ENOMEM;
-
-	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
-	hub->notif.base.fn = ssam_kip_hub_notif;
-	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
-	hub->notif.event.id.target_category = SSAM_SSH_TC_KIP,
-	hub->notif.event.id.instance = 0,
-	hub->notif.event.mask = SSAM_EVENT_MASK_TARGET;
-	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
-
-	hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY;
-	hub->get_state = ssam_kip_get_connection_state;
-
-	return ssam_hub_setup(sdev, hub);
-}
-
-static const struct ssam_device_id ssam_kip_hub_match[] = {
-	{ SSAM_SDEV(KIP, 0x01, 0x00, 0x00) },
-	{ },
-};
-
-static struct ssam_device_driver ssam_kip_hub_driver = {
-	.probe = ssam_kip_hub_probe,
-	.remove = ssam_hub_remove,
-	.match_table = ssam_kip_hub_match,
-	.driver = {
-		.name = "surface_kip_hub",
-		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-		.pm = &ssam_hub_pm_ops,
-	},
-};
-
-
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
 static const struct acpi_device_id ssam_platform_hub_match[] = {
@@ -720,44 +388,7 @@ static struct platform_driver ssam_platform_hub_driver = {
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 };
-
-
-/* -- Module initialization. ------------------------------------------------ */
-
-static int __init ssam_device_hub_init(void)
-{
-	int status;
-
-	status = platform_driver_register(&ssam_platform_hub_driver);
-	if (status)
-		goto err_platform;
-
-	status = ssam_device_driver_register(&ssam_base_hub_driver);
-	if (status)
-		goto err_base;
-
-	status = ssam_device_driver_register(&ssam_kip_hub_driver);
-	if (status)
-		goto err_kip;
-
-	return 0;
-
-err_kip:
-	ssam_device_driver_unregister(&ssam_base_hub_driver);
-err_base:
-	platform_driver_unregister(&ssam_platform_hub_driver);
-err_platform:
-	return status;
-}
-module_init(ssam_device_hub_init);
-
-static void __exit ssam_device_hub_exit(void)
-{
-	ssam_device_driver_unregister(&ssam_kip_hub_driver);
-	ssam_device_driver_unregister(&ssam_base_hub_driver);
-	platform_driver_unregister(&ssam_platform_hub_driver);
-}
-module_exit(ssam_device_hub_exit);
+module_platform_driver(ssam_platform_hub_driver);
 
 MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
 MODULE_DESCRIPTION("Device-registry for Surface System Aggregator Module");
-- 
2.36.1

From 9733bfb395839e0cf33b1e3d36d714b0d7c572f1 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 21 May 2022 00:51:05 +0200
Subject: [PATCH] platform/surface: aggregator: Be consistent with hub device
 IDs

Currently, we use a virtual device ID for the base (BAS) hub but an
actual device ID for the KIP hub. Let's be consistent about the naming
format and make all hubs virtual, with their instance ID reflecting the
subsystem.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/surface_aggregator_hub.c    |  4 ++--
 .../platform/surface/surface_aggregator_registry.c   | 12 ++++++------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_hub.c b/drivers/platform/surface/surface_aggregator_hub.c
index 20b1c38debfe..c473bdebf90c 100644
--- a/drivers/platform/surface/surface_aggregator_hub.c
+++ b/drivers/platform/surface/surface_aggregator_hub.c
@@ -340,8 +340,8 @@ static const struct ssam_hub_info kip_hub = {
 /* -- Driver registration. -------------------------------------------------- */
 
 static const struct ssam_device_id ssam_hub_match[] = {
-	{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00), (unsigned long)&base_hub },
-	{ SSAM_SDEV(KIP, 0x01, 0x00, 0x00),         (unsigned long)&kip_hub  },
+	{ SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00), (unsigned long)&kip_hub  },
+	{ SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00), (unsigned long)&base_hub },
 	{ }
 };
 MODULE_DEVICE_TABLE(ssam, ssam_hub_match);
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 11b51aa9ea73..cee7121e7fa6 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -38,15 +38,15 @@ static const struct software_node ssam_node_root = {
 	.name = "ssam_platform_hub",
 };
 
-/* Base device hub (devices attached to Surface Book 3 base). */
-static const struct software_node ssam_node_hub_base = {
-	.name = "ssam:00:00:02:00:00",
+/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */
+static const struct software_node ssam_node_hub_kip = {
+	.name = "ssam:00:00:01:0e:00",
 	.parent = &ssam_node_root,
 };
 
-/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */
-static const struct software_node ssam_node_hub_kip = {
-	.name = "ssam:01:0e:01:00:00",
+/* Base device hub (devices attached to Surface Book 3 base). */
+static const struct software_node ssam_node_hub_base = {
+	.name = "ssam:00:00:02:11:00",
 	.parent = &ssam_node_root,
 };
 
-- 
2.36.1

From 2d3a54490933722f2165f982c04de88e3ba46f31 Mon Sep 17 00:00:00 2001
From: Maximilian Luz <luzmaximilian@gmail.com>
Date: Sat, 21 May 2022 00:57:40 +0200
Subject: [PATCH] platform/surface: Update copyright year of various drivers

Update the copyright of various Surface drivers to the current year.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Patchset: surface-sam
---
 drivers/platform/surface/aggregator/Kconfig             | 2 +-
 drivers/platform/surface/aggregator/Makefile            | 2 +-
 drivers/platform/surface/aggregator/bus.c               | 2 +-
 drivers/platform/surface/aggregator/bus.h               | 2 +-
 drivers/platform/surface/aggregator/controller.c        | 2 +-
 drivers/platform/surface/aggregator/controller.h        | 2 +-
 drivers/platform/surface/aggregator/core.c              | 2 +-
 drivers/platform/surface/aggregator/ssh_msgb.h          | 2 +-
 drivers/platform/surface/aggregator/ssh_packet_layer.c  | 2 +-
 drivers/platform/surface/aggregator/ssh_packet_layer.h  | 2 +-
 drivers/platform/surface/aggregator/ssh_parser.c        | 2 +-
 drivers/platform/surface/aggregator/ssh_parser.h        | 2 +-
 drivers/platform/surface/aggregator/ssh_request_layer.c | 2 +-
 drivers/platform/surface/aggregator/ssh_request_layer.h | 2 +-
 drivers/platform/surface/aggregator/trace.h             | 2 +-
 drivers/platform/surface/surface_acpi_notify.c          | 2 +-
 drivers/platform/surface/surface_aggregator_cdev.c      | 2 +-
 drivers/platform/surface/surface_aggregator_registry.c  | 2 +-
 drivers/platform/surface/surface_dtx.c                  | 2 +-
 drivers/platform/surface/surface_gpe.c                  | 2 +-
 drivers/platform/surface/surface_hotplug.c              | 2 +-
 drivers/platform/surface/surface_platform_profile.c     | 2 +-
 22 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/platform/surface/aggregator/Kconfig b/drivers/platform/surface/aggregator/Kconfig
index cab020324256..c114f9dd5fe1 100644
--- a/drivers/platform/surface/aggregator/Kconfig
+++ b/drivers/platform/surface/aggregator/Kconfig
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
-# Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+# Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
 
 menuconfig SURFACE_AGGREGATOR
 	tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers"
diff --git a/drivers/platform/surface/aggregator/Makefile b/drivers/platform/surface/aggregator/Makefile
index c0d550eda5cd..fdf664a217f9 100644
--- a/drivers/platform/surface/aggregator/Makefile
+++ b/drivers/platform/surface/aggregator/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
-# Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+# Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
 
 # For include/trace/define_trace.h to include trace.h
 CFLAGS_core.o = -I$(src)
diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
index 4bba60884bb5..96986042a257 100644
--- a/drivers/platform/surface/aggregator/bus.c
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -2,7 +2,7 @@
 /*
  * Surface System Aggregator Module bus and device integration.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/device.h>
diff --git a/drivers/platform/surface/aggregator/bus.h b/drivers/platform/surface/aggregator/bus.h
index 6964ee84e79c..5b4dbf21906c 100644
--- a/drivers/platform/surface/aggregator/bus.h
+++ b/drivers/platform/surface/aggregator/bus.h
@@ -2,7 +2,7 @@
 /*
  * Surface System Aggregator Module bus and device integration.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_BUS_H
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index 6de834b52b63..43e765199137 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -2,7 +2,7 @@
 /*
  * Main SSAM/SSH controller structure and functionality.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/platform/surface/aggregator/controller.h b/drivers/platform/surface/aggregator/controller.h
index a0963c3562ff..f0d987abc51e 100644
--- a/drivers/platform/surface/aggregator/controller.h
+++ b/drivers/platform/surface/aggregator/controller.h
@@ -2,7 +2,7 @@
 /*
  * Main SSAM/SSH controller structure and functionality.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_CONTROLLER_H
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
index a62c5dfe42d6..1a6373dea109 100644
--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -7,7 +7,7 @@
  * Handles communication via requests as well as enabling, disabling, and
  * relaying of events.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/platform/surface/aggregator/ssh_msgb.h b/drivers/platform/surface/aggregator/ssh_msgb.h
index e562958ffdf0..f3ecad92eefd 100644
--- a/drivers/platform/surface/aggregator/ssh_msgb.h
+++ b/drivers/platform/surface/aggregator/ssh_msgb.h
@@ -2,7 +2,7 @@
 /*
  * SSH message builder functions.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_SSH_MSGB_H
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.c b/drivers/platform/surface/aggregator/ssh_packet_layer.c
index 8a4451c1ffe5..6748fe4ac5d5 100644
--- a/drivers/platform/surface/aggregator/ssh_packet_layer.c
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.c
@@ -2,7 +2,7 @@
 /*
  * SSH packet transport layer.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.h b/drivers/platform/surface/aggregator/ssh_packet_layer.h
index 2eb329f0b91a..64633522f971 100644
--- a/drivers/platform/surface/aggregator/ssh_packet_layer.h
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.h
@@ -2,7 +2,7 @@
 /*
  * SSH packet transport layer.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
diff --git a/drivers/platform/surface/aggregator/ssh_parser.c b/drivers/platform/surface/aggregator/ssh_parser.c
index b77912f8f13b..a6f668694365 100644
--- a/drivers/platform/surface/aggregator/ssh_parser.c
+++ b/drivers/platform/surface/aggregator/ssh_parser.c
@@ -2,7 +2,7 @@
 /*
  * SSH message parser.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_parser.h b/drivers/platform/surface/aggregator/ssh_parser.h
index 3bd6e180fd16..801d8fa69fb5 100644
--- a/drivers/platform/surface/aggregator/ssh_parser.h
+++ b/drivers/platform/surface/aggregator/ssh_parser.h
@@ -2,7 +2,7 @@
 /*
  * SSH message parser.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_SSH_PARSER_H
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c
index 790f7f0eee98..f5565570f16c 100644
--- a/drivers/platform/surface/aggregator/ssh_request_layer.c
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.c
@@ -2,7 +2,7 @@
 /*
  * SSH request transport layer.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <asm/unaligned.h>
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.h b/drivers/platform/surface/aggregator/ssh_request_layer.h
index 9c3cbae2d4bd..4e387a031351 100644
--- a/drivers/platform/surface/aggregator/ssh_request_layer.h
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.h
@@ -2,7 +2,7 @@
 /*
  * SSH request transport layer.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #ifndef _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H
diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h
index de64cf169060..7be0bb097dea 100644
--- a/drivers/platform/surface/aggregator/trace.h
+++ b/drivers/platform/surface/aggregator/trace.h
@@ -2,7 +2,7 @@
 /*
  * Trace points for SSAM/SSH.
  *
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #undef TRACE_SYSTEM
diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
index 7b758f8cc137..b0a83255d060 100644
--- a/drivers/platform/surface/surface_acpi_notify.c
+++ b/drivers/platform/surface/surface_acpi_notify.c
@@ -8,7 +8,7 @@
  * notifications sent from ACPI via the SAN interface by providing them to any
  * registered external driver.
  *
- * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <asm/unaligned.h>
diff --git a/drivers/platform/surface/surface_aggregator_cdev.c b/drivers/platform/surface/surface_aggregator_cdev.c
index 30fb50fde450..492c82e69182 100644
--- a/drivers/platform/surface/surface_aggregator_cdev.c
+++ b/drivers/platform/surface/surface_aggregator_cdev.c
@@ -3,7 +3,7 @@
  * Provides user-space access to the SSAM EC via the /dev/surface/aggregator
  * misc device. Intended for debugging and development.
  *
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/fs.h>
diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index cee7121e7fa6..3f81db28a702 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -6,7 +6,7 @@
  * cannot be auto-detected. Provides device-hubs and performs instantiation
  * for these devices.
  *
- * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/platform/surface/surface_dtx.c b/drivers/platform/surface/surface_dtx.c
index 1203b9a82993..ed36944467f9 100644
--- a/drivers/platform/surface/surface_dtx.c
+++ b/drivers/platform/surface/surface_dtx.c
@@ -8,7 +8,7 @@
  * acknowledge (to speed things up), abort (e.g. in case the dGPU is still in
  * use), or request detachment via user-space.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/fs.h>
diff --git a/drivers/platform/surface/surface_gpe.c b/drivers/platform/surface/surface_gpe.c
index ec66fde28e75..27365cbe1ee9 100644
--- a/drivers/platform/surface/surface_gpe.c
+++ b/drivers/platform/surface/surface_gpe.c
@@ -4,7 +4,7 @@
  * properly configuring the respective GPEs. Required for wakeup via lid on
  * newer Intel-based Microsoft Surface devices.
  *
- * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/platform/surface/surface_hotplug.c b/drivers/platform/surface/surface_hotplug.c
index cfcc15cfbacb..f004a2495201 100644
--- a/drivers/platform/surface/surface_hotplug.c
+++ b/drivers/platform/surface/surface_hotplug.c
@@ -10,7 +10,7 @@
  * Event signaling is handled via ACPI, which will generate the appropriate
  * device-check notifications to be picked up by the PCIe hot-plug driver.
  *
- * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2019-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <linux/acpi.h>
diff --git a/drivers/platform/surface/surface_platform_profile.c b/drivers/platform/surface/surface_platform_profile.c
index 6373d3b5eb7f..fbf2e11fd6ce 100644
--- a/drivers/platform/surface/surface_platform_profile.c
+++ b/drivers/platform/surface/surface_platform_profile.c
@@ -3,7 +3,7 @@
  * Surface Platform Profile / Performance Mode driver for Surface System
  * Aggregator Module (thermal subsystem).
  *
- * Copyright (C) 2021 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2021-2022 Maximilian Luz <luzmaximilian@gmail.com>
  */
 
 #include <asm/unaligned.h>
-- 
2.36.1