ladybird/Base/usr/share/man/man7/boot_parameters.md

Name

Boot Parameters - optional parameters accepted by the kernel

Description

Serenity's kernel can process parameters at boot time. This functionality is used to control or augment the state of features during the initial startup of the system.

Options

The kernel boot parameters take the form of {option_name}={value}, where the ={value} trailer can be omitted for specific parameters.

List of options:

• acpi - This parameter expects one of the following values. on - Boot with full ACPI support, using ACPI Machine Language interpretation (default). limited - Boot with limited ACPI support. off - Don't initialize ACPI at all.

• ahci_reset_mode - This parameter expects one of the following values. controller - Reset just the AHCI controller on boot. none - Don't perform any AHCI reset. complete - Reset the AHCI controller, and all AHCI ports on boot.

• boot_mode - This parameter expects one of the following values: text - Boots the system in text only mode. self-test - Boots the system in self-test, validation mode. graphical - Boots the system in the normal graphical mode.

• boot_prof - If present on the command line, global system profiling will be enabled as soon as possible during the boot sequence. Allowing you to profile startup of all applications.

• disable_ide - If present on the command line, the IDE controller will not be initialized during the boot sequence. Leaving only the AHCI and Ram Disk controllers.

• disable_physical_storage - If present on the command line, neither AHCI, or IDE controllers will be initialized on boot.

• disable_ps2_controller - If present on the command line, the I8042 keyboard controller will not be initialized on boot.

• disable_uhci_controller - If present on the command line, the UHCI controller will not be initialized on boot.

• disable_virtio - If present on the command line, virtio devices will not be detected, and initialized on boot.

• fbdev - This parameter expects on or off.

• force_pio - If present on the command line, the IDE controllers will be force into PIO mode when initialized IDE Channels on boot.

• hpet - This parameter expects one of the following values. periodic - The High Precision Event Timer should be configured in a periodic mode. nonperiodic - The High Precision Event Timer should eb configure din non-periodic mode.

• init - This parameter expects the fully qualified path to the init program the Kernel should launch after boot. This defaults to SystemServer(7).

• init_args - This parameter expects a set of arguments to pass to the init program. The value should be a set of strings separated by , characters.

• pci_ecam - This parameter expects on or off.

• root - This parameter configures the device to use as the root file system. It defaults to /dev/hda if unspecified.

• smp - This parameter expects a binary value of on or off. If enabled kernel will use APIC mode for handling interrupts instead of PIC mode. This parameter defaults to off.

• time - This parameter expects one of the following values. modern - This configures the system to attempt to use High Precision Event Timer (HPET) on boot. legacy - Configures the system to use the legacy programmable interrupt time for managing system team.

• vmmouse - This parameter expects a binary value of on or off. If enabled and running on a VMWare Hypervisor, the kernel will enable absolute mouse mode.

See also

• SystemServer(7).