This gives FunctionNode a "might need arguments object" boolean flag and
sets it based on the simplest possible heuristic for this: if we
encounter an identifier called "arguments" or "eval" up to the next
(nested) function declaration or expression, we won't need an arguments
object. Otherwise, we *might* need one - the final decision is made in
the FunctionDeclarationInstantiation AO.
Now, this is obviously not perfect. Even if you avoid eval, something
like `foo.arguments` will still trigger a false positive - but it's a
start and already massively cuts down on needlessly allocated objects,
especially in real-world code that is often minified, and so a full
"arguments" identifier will be an actual arguments object more often
than not.
To illustrate the actual impact of this change, here's the number of
allocated arguments objects during a full test-js run:
Before:
- Unmapped arguments objects: 78765
- Mapped arguments objects: 2455
After:
- Unmapped arguments objects: 18
- Mapped arguments objects: 37
This results in a ~5% speedup of test-js on my Linux host machine, and
about 3.5% on i686 Serenity in QEMU (warm runs, average of 5).
The following microbenchmark (calling an empty function 1M times) runs
25% faster on Linux and 45% on Serenity:
function foo() {}
for (var i = 0; i < 1_000_000; ++i)
foo();
test262 reports no changes in either direction, apart from a speedup :^)
Before this we used an ad-hoc combination of references and 'variables'
stored in a hashmap. This worked in most cases but is not spec like.
Additionally hoisting, dynamically naming functions and scope analysis
was not done properly.
This patch fixes all of that by:
- Implement BindingInitialization for destructuring assignment.
- Implementing a new ScopePusher which tracks the lexical and var
scoped declarations. This hoists functions to the top level if no
lexical declaration name overlaps. Furthermore we do checking of
redeclarations in the ScopePusher now requiring less checks all over
the place.
- Add methods for parsing the directives and statement lists instead
of having that code duplicated in multiple places. This allows
declarations to pushed to the appropriate scope more easily.
- Remove the non spec way of storing 'variables' in
DeclarativeEnvironment and make Reference follow the spec instead of
checking both the bindings and 'variables'.
- Remove all scoping related things from the Interpreter. And instead
use environments as specified by the spec. This also includes fixing
that NativeFunctions did not produce a valid FunctionEnvironment
which could cause issues with callbacks and eval. All
FunctionObjects now have a valid NewFunctionEnvironment
implementation.
- Remove execute_statements from Interpreter and instead use
ASTNode::execute everywhere this simplifies AST.cpp as you no longer
need to worry about which method to call.
- Make ScopeNodes setup their own environment. This uses four
different methods specified by the spec
{Block, Function, Eval, Global}DeclarationInstantiation with the
annexB extensions.
- Implement and use NamedEvaluation where specified.
Additionally there are fixes to things exposed by these changes to eval,
{for, for-in, for-of} loops and assignment.
Finally it also fixes some tests in test-js which where passing before
but not now that we have correct behavior :^).
The old name is the result of the perhaps somewhat confusingly named
abstract operation OrdinaryFunctionCreate(), which creates an "ordinary
object" (https://tc39.es/ecma262/#ordinary-object) in contrast to an
"exotic object" (https://tc39.es/ecma262/#exotic-object).
However, the term "Ordinary Function" is not used anywhere in the spec,
instead the created object is referred to as an "ECMAScript Function
Object" (https://tc39.es/ecma262/#sec-ecmascript-function-objects), so
let's call it that.
The "ordinary" vs. "exotic" distinction is important because there are
also "Built-in Function Objects", which can be either implemented as
ordinary ECMAScript function objects, or as exotic objects (our
NativeFunction).
More work needs to be done to move a lot of infrastructure to
ECMAScriptFunctionObject in order to make FunctionObject nothing more
than an interface for objects that implement [[Call]] and optionally
[[Construct]].
RegExpInitialize specifies how the pattern string should be created
before passing it to [[RegExpMatcher]]. Rather than passing it as-is,
the string should be converted to code points and back to a "List" (if
the Unicode flag is present), or as a "List" of UTF-16 code units.
Further. the spec requires that we keep both the original pattern string
and this parsed string in the RegExp object.
The caveat is that the LibRegex parser further requires any multi-byte
code units to be escaped (as "\unnnn"). Otherwise, the code unit is
recognized as individual UTF-8 bytes.
This removes all usages of the non-standard put helper method and
replaces all of it's usages with the specification required alternative
or with define_direct_property where appropriate.
This removes all usages of the non-standard define_property helper
method and replaces all it's usages with the specification required
alternative or with define_direct_property where appropriate.
This is a huge patch, I know. In hindsight this perhaps could've been
done slightly more incremental, but I started and then fixed everything
until it worked, and here we are. I tried splitting of some completely
unrelated changes into separate commits, however. Anyway.
This is a rewrite of most of Object, and by extension large parts of
Array, Proxy, Reflect, String, TypedArray, and some other things.
What we already had worked fine for about 90% of things, but getting the
last 10% right proved to be increasingly difficult with the current code
that sort of grew organically and is only very loosely based on the
spec - this became especially obvious when we started fixing a large
number of test262 failures.
Key changes include:
- 1:1 matching function names and parameters of all object-related
functions, to avoid ambiguity. Previously we had things like put(),
which the spec doesn't have - as a result it wasn't always clear which
need to be used.
- Better separation between object abstract operations and internal
methods - the former are always the same, the latter can be overridden
(and are therefore virtual). The internal methods (i.e. [[Foo]] in the
spec) are now prefixed with 'internal_' for clarity - again, it was
previously not always clear which AO a certain method represents,
get() could've been both Get and [[Get]] (I don't know which one it
was closer to right now).
Note that some of the old names have been kept until all code relying
on them is updated, but they are now simple wrappers around the
closest matching standard abstract operation.
- Simplifications of the storage layer: functions that write values to
storage are now prefixed with 'storage_' to make their purpose clear,
and as they are not part of the spec they should not contain any steps
specified by it. Much functionality is now covered by the layers above
it and was removed (e.g. handling of accessors, attribute checks).
- PropertyAttributes has been greatly simplified, and is being replaced
by PropertyDescriptor - a concept similar to the current
implementation, but more aligned with the actual spec. See the commit
message of the previous commit where it was introduced for details.
- As a bonus, and since I had to look at the spec a whole lot anyway, I
introduced more inline comments with the exact steps from the spec -
this makes it super easy to verify correctness.
- East-const all the things.
As a result of all of this, things are much more correct but a bit
slower now. Retaining speed wasn't a consideration at all, I have done
no profiling of the new code - there might be low hanging fruits, which
we can then harvest separately.
Special thanks to Idan for helping me with this by tracking down bugs,
updating everything outside of LibJS to work with these changes (LibWeb,
Spreadsheet, HackStudio), as well as providing countless patches to fix
regressions I introduced - there still are very few (we got it down to
5), but we also get many new passing test262 tests in return. :^)
Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
Specifically, this now explicitly takes the length, adds missing
exceptions checks to calls with user-supplied lengths, takes and uses
the prototype argument, and fixes some spec non-conformance in
ArrayConstructor and its native functions around the use of ArrayCreate
The parser doesn't always track lexical scopes correctly, so let's not
rely on that for direct argument loading.
This reverts the LoadArguments bytecode instruction as well. We can
bring these things back when the parser can reliably tell us that
a given Identifier is indeed a function argument.
To better follow the spec, we need to distinguish between the current
execution context's lexical environment and variable environment.
This patch moves us to having two record pointers, although both of
them point at the same environment records for now.
This patch makes the following name changes:
- ScopeObject => EnvironmentRecord
- LexicalEnvironment => DeclarativeEnvironmentRecord
- WithScope => ObjectEnvironmentRecord
This now matches the spec's OrdinaryObjectCreate() across the board:
instead of implicitly setting the created object's prototype to
%Object.prototype% and then in many cases setting it to a nullptr right
away, it now has an 'Object* prototype' parameter with _no default
value_. This makes the code easier to compare with the spec, very clear
in terms of what prototype is being used as well as avoiding unnecessary
shape transitions.
Also fixes a couple of cases were we weren't setting the correct
prototype.
There's no reason to assume that the object would not be empty (as in
having own properties), so let's follow our existing pattern of
Type::create(...) and simply call it 'create'.
This commit adds a bunch of passes, the most interesting of which is a
pass that merges blocks together, and a pass that places blocks that
flow into each other next to each other, and a very simply pass that
removes duplicate basic blocks.
Note that this does not remove the jump at the end of each block in that
pass to avoid scope creep in the passes.
These are pretty hairy if someone forgets to override one, as the
catchall function in Instruction will keep calling itself over and over
again, leading to really hard-to-debug situations.
This is generated for Identifier nodes that represent a function
argument variable. It loads a given argument index from the current
call frame into the accumulator.
