These were an ad-hoc way to implement special behaviour when reading or
writing to specific object properties. Because these were effectively
replaced by the abillity to override the internal methods of Object,
they are no longer needed.
This removes all usages of the non-standard define_property helper
method and replaces all it's usages with the specification required
alternative or with define_direct_property where appropriate.
Now that the Object rewrite is in place, we have enough tools to
implement the mapped `arguments` propreties according to spec.
The basic mechanism is that the `arguments` object installs a hidden
parameter mapping object that property accesses get filtered through.
This is how accessing numeric properties on `arguments` are proxied
to the named identifier in the function scope.
When `arguments` is instantiated, getters and setters are created
for all the numeric properties on the object that correspond to
function arguments. These getters and setters can be deleted from the
object. This is all pretty intricate, so refer to the spec for details.
Note that the `arguments` object itself is still lazily instantiated
on first access within a function. This is non-conforming, and we'll
have to revisit this once we get around to improving function calls.
To make this happen, this patch implements the SetImmutablePrototype
abstract operation (as a method on Object) and then overrides
[[SetPrototypeOf]] on ObjectPrototype.
This is a huge patch, I know. In hindsight this perhaps could've been
done slightly more incremental, but I started and then fixed everything
until it worked, and here we are. I tried splitting of some completely
unrelated changes into separate commits, however. Anyway.
This is a rewrite of most of Object, and by extension large parts of
Array, Proxy, Reflect, String, TypedArray, and some other things.
What we already had worked fine for about 90% of things, but getting the
last 10% right proved to be increasingly difficult with the current code
that sort of grew organically and is only very loosely based on the
spec - this became especially obvious when we started fixing a large
number of test262 failures.
Key changes include:
- 1:1 matching function names and parameters of all object-related
functions, to avoid ambiguity. Previously we had things like put(),
which the spec doesn't have - as a result it wasn't always clear which
need to be used.
- Better separation between object abstract operations and internal
methods - the former are always the same, the latter can be overridden
(and are therefore virtual). The internal methods (i.e. [[Foo]] in the
spec) are now prefixed with 'internal_' for clarity - again, it was
previously not always clear which AO a certain method represents,
get() could've been both Get and [[Get]] (I don't know which one it
was closer to right now).
Note that some of the old names have been kept until all code relying
on them is updated, but they are now simple wrappers around the
closest matching standard abstract operation.
- Simplifications of the storage layer: functions that write values to
storage are now prefixed with 'storage_' to make their purpose clear,
and as they are not part of the spec they should not contain any steps
specified by it. Much functionality is now covered by the layers above
it and was removed (e.g. handling of accessors, attribute checks).
- PropertyAttributes has been greatly simplified, and is being replaced
by PropertyDescriptor - a concept similar to the current
implementation, but more aligned with the actual spec. See the commit
message of the previous commit where it was introduced for details.
- As a bonus, and since I had to look at the spec a whole lot anyway, I
introduced more inline comments with the exact steps from the spec -
this makes it super easy to verify correctness.
- East-const all the things.
As a result of all of this, things are much more correct but a bit
slower now. Retaining speed wasn't a consideration at all, I have done
no profiling of the new code - there might be low hanging fruits, which
we can then harvest separately.
Special thanks to Idan for helping me with this by tracking down bugs,
updating everything outside of LibJS to work with these changes (LibWeb,
Spreadsheet, HackStudio), as well as providing countless patches to fix
regressions I introduced - there still are very few (we got it down to
5), but we also get many new passing test262 tests in return. :^)
Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
Specifically, this now explicitly takes the length, adds missing
exceptions checks to calls with user-supplied lengths, takes and uses
the prototype argument, and fixes some spec non-conformance in
ArrayConstructor and its native functions around the use of ArrayCreate
If we define a property with just a setter/getter (not both) we must:
- take the previous getter/setter if defined on the actual object
- overwrite the other to nullptr if it is from a prototype
In get_own_properties:
Entries which are deleted while iterating need to be skipped
In PropertyDescriptor::from_dictionary
If the getter/setter is undefined it should still mark it as present
The specification defines that we should only change attributes that
exist in the incoming descriptor, but since we currently just overwrite
the existing descriptor with the new one, we can just set the missing
attributes to the existing values manually.
This commit expands on 5eef07d232 by
automatically trying to coerce Type::String PropertyNames into numbers
when a caller checks if the PropertyName is_number/is_string.
This has several benefits:
- We no longer have to duplicate the number coercion code to every
function that accepts a PropertyNumber. (Or more likely, forget to.)
- This keeps the lazy nature of only doing the coercion when and if
there is a semantic difference to the different PropertyName types,
which means this shouldnt cause any performance drop.
- Since this coercion changes the state of the PropertyName itself the
result is essentially cached and can speed up any repeat uses of the
same PropertyName instance.
This now matches the spec's OrdinaryObjectCreate() across the board:
instead of implicitly setting the created object's prototype to
%Object.prototype% and then in many cases setting it to a nullptr right
away, it now has an 'Object* prototype' parameter with _no default
value_. This makes the code easier to compare with the spec, very clear
in terms of what prototype is being used as well as avoiding unnecessary
shape transitions.
Also fixes a couple of cases were we weren't setting the correct
prototype.
There's no reason to assume that the object would not be empty (as in
having own properties), so let's follow our existing pattern of
Type::create(...) and simply call it 'create'.
We were doing a *lot* of string-to-int conversion while creating a new
global object. This happened because Object::put() would try to convert
the property name (string) to an integer to see if it refers to an
indexed property.
Sidestep this issue by using PropertyName for the CommonPropertyNames
struct on VM (vm.names.foo), and giving PropertyName a flag that tells
us whether it's a string that *may be* a number.
All CommonPropertyNames are set up so they are known to not be numbers.
As mentioned on Discord earlier, we'll add these to all new functions
going forward - this is the backfill. Reasons:
- It makes you look at the spec, implementing based on MDN or V8
behavior is a no-go
- It makes finding the various functions that are non-compliant easier,
in the future everything should either have such a comment or, if it's
not from the spec at all, a comment explaining why that is the case
- It makes it easier to check whether a certain abstract operation is
implemented in LibJS, not all of them use the same name as the spec.
E.g. RejectPromise() is Promise::reject()
- It makes it easier to reason about vm.arguments(), e.g. when the
function has a rest parameter
- It makes it easier to see whether a certain function is from a
proposal or Annex B
Also:
- Add arguments to all functions and abstract operations that already
had a comment
- Fix some outdated section numbers
- Replace some ecma-international.org URLs with tc39.es
This is very similar to Object::define_native_property, but here the
native functions are exported as standalone JS getter and setter
functions, instead of being transparently called by interactions with
the property.
This would return an empty value once it hits an exception check
otherwise. Considering that this mostly is used in situations where we
already *do* have an exception (traceback printing, for example), let's
make this easier for ourselves to use.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
This was failing to take two things into account:
- When constructing a PropertyName from a value, it won't automatically
convert to Type::Number for something like string "0", even though
that's how things work internally, since indexed properties are stored
separately. This will be improved in a future patch, it's a footgun
and should happen automatically.
- Those can't be looked up on the shape, we have to go through the
indexed properties instead.
Additionally it now operates on the shape or indexed properties directly
as define_property() was overly strict and would throw if a property was
already non-configurable.
Fixes#6469.
